HRH Posted June 10, 2015 Report Share Posted June 10, 2015 Fing sweet! It's almost there! 2 Quote Link to comment
uberkevin Posted June 10, 2015 Report Share Posted June 10, 2015 That's awesome I have picture of that blue 620. Happened to spot it when I was down there. 2 Quote Link to comment
Draker Posted June 10, 2015 Report Share Posted June 10, 2015 I am going to try to stop by tomorrow after work. 3 Quote Link to comment
HOGIE Posted June 10, 2015 Report Share Posted June 10, 2015 That fender looks relly good on their man. It great to see that the driveline snafoo is in the past. Good on ya boys for steppin up to handle it! 4 Quote Link to comment
gene knight Posted June 10, 2015 Report Share Posted June 10, 2015 I hope that the rear is going to be lowered or the front raised. 1 Quote Link to comment
gene knight Posted June 10, 2015 Report Share Posted June 10, 2015 Don't forget to install the front valance, bumper, hood. Truck looks good 1 Quote Link to comment
Icehouse Posted June 10, 2015 Report Share Posted June 10, 2015 You guys are amazing!!!! Just a tip I thought I would pass along. For cleaning white walls, find a smooth "river rock", use the "river rock" like a scrub brush on the white walls while using water. Seriously it works amazing. Gotta watch out for the rims though. Frank showed me this trick. Used it all the time on my old 620. 5 Quote Link to comment
Busta Nut Posted June 10, 2015 Report Share Posted June 10, 2015 Ho Leeeee Fuuuuuuuuuuck!!! :wub: :frantics: :w00t: :thumbup: B) PIMP SHIT....... 4 Quote Link to comment
bananahamuck Posted June 10, 2015 Report Share Posted June 10, 2015 I hope that the rear is going to be lowered or the front raised. I'm thinking leave back that high and lowering the front a tiny bit more with 10" slot mags and wide ass tires in the back would look dope. 5 Quote Link to comment
q-tip Posted June 10, 2015 Report Share Posted June 10, 2015 Dont forget some like 14 window super complex canopy/topper/capmer shell.. 4 Quote Link to comment
Gradyfest Posted June 10, 2015 Report Share Posted June 10, 2015 Looks like you're missing some of these. I have two extra I can bring to Canby to throw on it? I can't wait to see it! 5 Quote Link to comment
denmarkboy Posted June 10, 2015 Author Report Share Posted June 10, 2015 Looks like you're missing some of these. I have two extra I can bring to Canby to throw on it? I can't wait to see it! Thanks , but we do have them . Just haven't whipped them out yet . Mike Klotz sent some a while ago . I should have put them in yesterday when i was down there. 4 Quote Link to comment
Gradyfest Posted June 10, 2015 Report Share Posted June 10, 2015 Y'all got all the details covered! 1 Quote Link to comment
Gradyfest Posted June 10, 2015 Report Share Posted June 10, 2015 You get those blue seat for me yet BTW Demarkboy? Lol, J/K. This guy's just excited. 1 Quote Link to comment
denmarkboy Posted June 10, 2015 Author Report Share Posted June 10, 2015 Y'all got all the details covered! I'm trying ! You get those blue seat for me yet BTW Demarkboy? Lol, J/K. This guy's just excited. They are being pulled as we speak. 2 Quote Link to comment
TENDRIL Posted June 10, 2015 Report Share Posted June 10, 2015 Dont forget some like 14 window super complex canopy/topper/capmer shell.. No dump bed 3 Quote Link to comment
denmarkboy Posted June 10, 2015 Author Report Share Posted June 10, 2015 I almost lowered it yesterday . When the drive line didn't clear the old carrier bearing mount by 3/4 of an inch. Dropping it 2 inches would have made it clear perfect . But h5wagon talked me out of it .. not because of low .. because another 30.00 for blocks . He is lucky I didn't have a set on the shelf . They would of been on . 6 Quote Link to comment
Brohemius Posted June 10, 2015 Report Share Posted June 10, 2015 The truck is looking so fantastic! Props to everyone busting thier ass on this project. Especially al, he was up till 1:30 last night working on the truck! Good work everyone. 1 Quote Link to comment
HOGIE Posted June 10, 2015 Report Share Posted June 10, 2015 Dont forget some like 14 window super complex canopy/topper/capmer shell.. Wow tip that's an awesome idea.... 1) If you or someone else is donating it 2) Can be delivered and installed by tomorrow 3) Has a perfect white paint job, otherwise it would look like shit Maybe we should proceed without, sounds a bit unrealistic. 3 Quote Link to comment
q-tip Posted June 10, 2015 Report Share Posted June 10, 2015 Man, if I had one.... 1 Quote Link to comment
gene knight Posted June 10, 2015 Report Share Posted June 10, 2015 I had that look on my 521 back in the 80's with a shell on it and didn't like it after 3 months so I got rid of shell, dropped the rear and reindexed the torsion bars and adjusted the ride height at all 4 corners, before I went to hydraulics for dancing bed modifications 2 Quote Link to comment
Loren O Posted June 10, 2015 Report Share Posted June 10, 2015 If you decide you want to go with the lowering blocks after all, I have a set of 2" lowering blocks I would be willing to donate to this truck. 2 Quote Link to comment
Draker Posted June 10, 2015 Report Share Posted June 10, 2015 Thats a great offer Loren, but there is no time for that. AL DO NOT READ THIS POST. No additional stress needed. If we had 2 weeks until canby.. okay maybe. This truck needs to be running, driving, stopping, not leaking anything and aligned in less than 48 hours. More like less than 20 working hours. Not to mention interior installed.. finishing electrical bits, bolting sheet metal on, aligning doors, weather strip, head liners, bed liners, fluids, DETAILING!!! etc etc etc... The ship for additional modifications sailed weeks and a thousand plus dollars ago. The engine still needs to be broken in... On top of all that, the dude running this ship has to organize the logistics of transporting the truck, advertising the truck, showing the truck, getting tents and supplies to stage the truck at the show, organize the video display of the truck at the show, get his shit ready for camping, get his OWN truck ready. This truck needs to be at the fairgrounds Friday MORNING! 5 Quote Link to comment
]2eDeYe Posted June 10, 2015 Report Share Posted June 10, 2015 No pressure!! :lol: 5 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.