Guest Rick-rat Posted April 10, 2012 Report Share Posted April 10, 2012 Rotated tires, washed and waxed, drove around in the great sunny weather today Quote Link to comment
Guest Rick-rat Posted April 13, 2012 Report Share Posted April 13, 2012 New stereo installed and finally installed my voltmeter Quote Link to comment
NSRz32 Posted April 13, 2012 Report Share Posted April 13, 2012 Made some gaskets for my velocity stacks so they sit nice and even on my SU's :) Quote Link to comment
wayno Posted April 13, 2012 Report Share Posted April 13, 2012 I broke the 521 work truck upper A frame bolts again today, that's the fourth time now, and I am getting tired of it, I fabbed this whole front disc brake setup several years ago, but it's getting old. I limped home and it took a while to get one of the pieces of bolt out of the threaded hole, fact is the easy out broke off trying, so I grabbed a big punch(3 feet long) and the sledge, and punched it out of the hole, it took the threads right off the bolt piece, then I chased the hole with a tap, got the other piece out fairly easy, and put it back together, I used grade 8 bolts this time, hope this fixes it for the final time. Quote Link to comment
Skulptr Posted April 13, 2012 Report Share Posted April 13, 2012 finished the texture paint and clear on my tool box, and did a color sample to my tail gate. yes i know it looks like hell, but this is just to see if i like the color and sheen. i'm ditching my tailgate altogether to make room for the tire carrier. and the runs you can see in the tail gate paint are from the previous owners half ass rattle can job. Quote Link to comment
Skulptr Posted April 13, 2012 Report Share Posted April 13, 2012 cut off the cat with intents to move the muffler from the rear to replace the cat. turns out they clamped it, welded it, and left the clamps on. psyched me out, now she sounds like the offspring of a v8 shagging a harley. used up my left over 20% tint on my wing windows, just to see how it looks. hopefully by the end of the month, this truck will be completely blacked out. including the lights. Quote Link to comment
poor-mans-720 Posted April 14, 2012 Report Share Posted April 14, 2012 started cutting all the emission crap outta my engine bay. Its killing me, its an eye sore, and i am tired of replacing all those damn hoses. I know i have a leak some where. so when i get rid of it all, it'll look cleaner, and leak will be gone. Also painted my hood. It was stock grey, PO rattle canned the truck black. and left two fat gray strips going down the hood. looked horrible. so Rustoleum, brushed on, looks better. Quote Link to comment
510Chad Posted April 16, 2012 Report Share Posted April 16, 2012 Installed a dual pull choke cable for the SU's. Made some air cleaners ala this : http://community.ratsun.net/topic/5294-su-air-cleaners-for-a-ratsun-price/ . Thank you zerow for the right up. Maybe someday I'll post pics..... :w00t: Quote Link to comment
datzenmike Posted April 16, 2012 Report Share Posted April 16, 2012 I don't post here much as my 620 is sitting in the back yary for the lasy 2-3years. But yesterday I removed the stereo, wiring, amp and CD changer. (that's how old the system is, lol)Still have some speakers to remove but it's all going into the 710 so I have tunes to Canby and back. 1 Quote Link to comment
darrel Posted April 20, 2012 Report Share Posted April 20, 2012 checked compression-- 140-110-100-140. New ngk wires and plugs. Runs a lot smoother. Quote Link to comment
Jayden71 Posted April 22, 2012 Report Share Posted April 22, 2012 Swapped the 521s 210 head with a U67. Goes very well with Offy intake and brand new weber! Sooooo much happier!!! 1 Quote Link to comment
elmerfudpucker Posted April 22, 2012 Report Share Posted April 22, 2012 I don't post here much as my 620 is sitting in the back yary for the lasy 2-3years. But yesterday I removed the stereo, wiring, amp and CD changer. (that's how old the system is, lol)Still have some speakers to remove but it's all going into the 710 so I have tunes to Canby and back. CD changer.... hell I figured you was still using an 8 track cassette adapter! Quote Link to comment
socaldatsun Posted May 2, 2012 Report Share Posted May 2, 2012 Finally got the screws to fasten the dash to the firewall, got some ruber grommets for the locks so they dont rattle in the doors, swapped the altinator out today. Recently i relocated the batery to the back :) Quote Link to comment
datsunaholic Posted May 2, 2012 Report Share Posted May 2, 2012 Replaced a small coolant recirculation hose. It had a pinhole leak that I didn't notice until the truck developed a severe miss... because, like always, it was spraying directly into the distributor. Mopped out the mess, replaced the hose, and found a missing vacuum port cap. 30 seconds later, spotted the cap in the driveway. It had apparently been off for a couple weeks, as the truck had had idling issues but with the cap back on, it idles normally again. Quote Link to comment
Master-O-Turbonics Posted May 5, 2012 Report Share Posted May 5, 2012 Got it running Quote Link to comment
banginboots Posted May 7, 2012 Report Share Posted May 7, 2012 put in skeeter bass boat seats so my ass fits in tha cab oh and a new carrier bearing and oil switch 1 Quote Link to comment
konig209 Posted May 7, 2012 Report Share Posted May 7, 2012 I took off my front bumper. Lol Quote Link to comment
poor-mans-720 Posted May 8, 2012 Report Share Posted May 8, 2012 replaced my flywheel. Starter engages beautifully now... no more squel, snaps, pops, or grinds when i turn it over... Quote Link to comment
ggzilla Posted May 8, 2012 Report Share Posted May 8, 2012 Rinsed the dirt and tree pollen off the front sheet metal, drove it around a bit. Quote Link to comment
metalmonkey47 Posted May 8, 2012 Report Share Posted May 8, 2012 Pulled the seat out and played doctor with the cancer. Quote Link to comment
moparvwfreak Posted May 8, 2012 Report Share Posted May 8, 2012 tonight, i changed the brown transmission gear lube and the split pea green diff lube in the red truck, and stole the battery out of my black truck to put into the sentra so i can move it and show it does run to prospective buyers. Quote Link to comment
dscottdatsun Posted May 13, 2012 Report Share Posted May 13, 2012 Just about ready to fire up my fresh motor! :thumbup: Quote Link to comment
Skulptr Posted May 17, 2012 Report Share Posted May 17, 2012 drove it for the first time in almost a month, whiny gears n all :thumbup: Quote Link to comment
ggzilla Posted May 20, 2012 Report Share Posted May 20, 2012 Noticed a drop of lube back on the diff, so checked the level. It was full, the 90 weight looks new. Cleaned the battery and battery cables. I do it once a year even if it hasn't started acting up yet ... Replaced two wheels studs and bought some new wheel nuts. Now I have 16 wheel nuts on. Might be safer than the 12 it's been running on the last 11 months. Checked front & rear brakes. Fronts still look new (15mm left of 16mm pads). Rears at about 50%. Very good. Test drove it. Ready for PoDatsuns! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.