heywier427 Posted June 5, 2015 Report Share Posted June 5, 2015 I must have the wrong offsets. Look how much more lip my wheels have compared to yours. Boo... But they came with the parts car, and they're mint. Picked up a set of snowflakes to refinish, as I thought this was the case. Quote Link to comment
Sealik Posted June 5, 2015 Report Share Posted June 5, 2015 Had my tail pipe tucked a tad so I could fit some new 235/60s Quote Link to comment
Draker Posted June 6, 2015 Report Share Posted June 6, 2015 Aligned it, exhaust installed... drove to work. Quote Link to comment
shacks510 Posted June 6, 2015 Report Share Posted June 6, 2015 Went outside, looked at it, went back inside. 3 Quote Link to comment
qwik510 Posted June 6, 2015 Report Share Posted June 6, 2015 whos coping who :)charging the battery and putting fluids in. Should be 1st start up tonight! Yay!Qwik,My wheels stick out way more than yours. Is is just un cambered, or do I have the wrong offsets.I haven't done any alignment adjustments yet, nor have I looked up the wheel offsets.I want my wheels to do exactly what yours are doing.Thanks. My wheels are 15" x 6". I'm not sure of the offset. I have not aligned the car yet. ZX struts with coil overs up front. Penultimate crossmember in the rear. Quote Link to comment
qwik510 Posted June 6, 2015 Report Share Posted June 6, 2015 Here's a shot of the rear. The fender lip is rubbing on the tire. I need to do some more rolling of the fender lip. 1 Quote Link to comment
edekalil Posted June 7, 2015 Report Share Posted June 7, 2015 Gonna take her out and spank her good. Quote Link to comment
jovial_cynic Posted June 8, 2015 Report Share Posted June 8, 2015 Made the soldering adjustments to the R33 tach to properly display the input from the SR20DET speed sensor. Also diagnosed a pretty significant rod knock... so I'll have to pull the engine to check the bearings and crank. Quote Link to comment
Big_E-Dog Posted June 8, 2015 Report Share Posted June 8, 2015 REAR DISC BRAKES ONA' WAGON BITCHES lol Quote Link to comment
freetheoranges Posted June 8, 2015 Report Share Posted June 8, 2015 Stalking her. Datsun Driving Canby Fun .... with a license and vehicle which runs. So for now, color change... 1 Quote Link to comment
edekalil Posted June 8, 2015 Report Share Posted June 8, 2015 Finally got them out and took the 72 for a ride. Had to charge the Cuda up to get it out of the way. They all seem to be running better so far. 4 Quote Link to comment
ByStickel Posted June 9, 2015 Report Share Posted June 9, 2015 Picked up these, 13x8, though I'm doubtful the offset is going to work out. (They'll fit stock brakes and huge flares... not exactly what I have. I'll probably hang onto them and see about cutting out the centers and changing the offset to clear Wilwood calipers. I love the steelie look.) 1 Quote Link to comment
Ranman72 Posted June 11, 2015 Report Share Posted June 11, 2015 I put the door back on 4 Quote Link to comment
Big_E-Dog Posted June 13, 2015 Report Share Posted June 13, 2015 replaced the 13/16 master cylinder that needed a booster to a 3/4 master without a booster. pedal feel is much better!!! Quote Link to comment
paradime Posted June 14, 2015 Report Share Posted June 14, 2015 Finally flipped the back assward quick release hub on the passenger side safety harness. Quote Link to comment
edekalil Posted June 14, 2015 Report Share Posted June 14, 2015 Try to get all the cars out and make my garage look like this. Then clean it up. Quote Link to comment
edekalil Posted June 14, 2015 Report Share Posted June 14, 2015 Got them out and took them for a ride. And had to get them back in before the rain. Gotta keep them out of the rain if possible. 1 Quote Link to comment
edekalil Posted June 14, 2015 Report Share Posted June 14, 2015 I really got to get this car back together. Just no time now to do much. At least the 70 and 72 are running. I gotta find some time next to get the wagon back up. 1 Quote Link to comment
ByStickel Posted June 17, 2015 Report Share Posted June 17, 2015 After assembling the ZX struts with Z perches and rear springs, I started putting fenders and trim back on. Looks good from a distance. At some point, I guess I'm going to have to try to start it... 2 Quote Link to comment
r0p0doe Posted June 17, 2015 Report Share Posted June 17, 2015 Installed grill emblem I got from @shacks510 as best I could in it's original spot... 3 Quote Link to comment
DUBL ZERO Posted June 18, 2015 Report Share Posted June 18, 2015 I installed a 95 civic console with a flip up cup holder in Trixie today . 1 Quote Link to comment
ByStickel Posted June 19, 2015 Report Share Posted June 19, 2015 Made new tie rods for my front steer, rack car. The geometry isn't perfect, but will have to stay that way until I can build a new crossmember. Quote Link to comment
r0p0doe Posted June 19, 2015 Report Share Posted June 19, 2015 Installed a new brake light switch so now my brake lights work again, next up is brakes B) Quote Link to comment
Big_E-Dog Posted June 20, 2015 Report Share Posted June 20, 2015 I installed a 95 civic console with a flip up cup holder in Trixie today . i actually have one of these....how bad is the fitment on the tunel? Quote Link to comment
DUBL ZERO Posted June 20, 2015 Report Share Posted June 20, 2015 It fits Great. if you don' have the console E-brake, Take out the small inner tray and carpet the entire inner of the console, Huge storage box inside !! i actually have one of these....how bad is the fitment on the tunel? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.