Lordmodelbuilder Posted November 18, 2011 Report Share Posted November 18, 2011 Quote Link to comment
Steroid Posted November 18, 2011 Report Share Posted November 18, 2011 Thanks Brad ! ! ! ! ! It would be very cool to see both of these shells on two 620s at next years Bar-B-Que ! Come on people, somebody save these things!!!!!!!! Quote Link to comment
HRH Posted November 18, 2011 Report Share Posted November 18, 2011 Spokane Pull and Save, there is a 65 NL320 pickup that has bumperettes. Good condition, would need to be rechromed. Grill is intact, as are taillights. Truck is mostly complete, some rust, got blasted in the driver's door, but not horrible. Let me know if anyone seriously needs something that can be shipped and I'll try and grab a few parts. -Matt 2O8-Six 6 O - 8 3 2 1 Send me a text for the quickest response. Quote Link to comment
Lordmodelbuilder Posted November 19, 2011 Report Share Posted November 19, 2011 Went back today to get the G-T Spoiler rear window frame. Came home with a bit more. :D Also found another 521 rear fender flare! Brad Quote Link to comment
ggzilla Posted November 19, 2011 Author Report Share Posted November 19, 2011 good work! Quote Link to comment
Lordmodelbuilder Posted November 19, 2011 Report Share Posted November 19, 2011 11-18-2011 Pick-A-Part. 2025 S. Miliken Ave. Ontario,Calif.91761. Had 1978 build date on it. Long bed. Quote Link to comment
ggzilla Posted November 19, 2011 Author Report Share Posted November 19, 2011 Where is that 1978 at? Quote Link to comment
Hardwyre Posted November 20, 2011 Report Share Posted November 20, 2011 11-18-2011 Pick-A-Part. 2025 S. Miliken Ave. Ontario,Calif.91761. Had 1978 build date on it. Long bed. Some of the things these junkyards balance their vehicles on just amaze me. At least the Pick'n'pulls around here use wheels welded together in an upside down T. Quote Link to comment
brodster Posted November 21, 2011 Report Share Posted November 21, 2011 Went to the Arlington, WA Pick-n-pull today Saw a 1977 280z with a couple of goodies that are worth noting...I think (I don't know much about Z's) Ignition switch with keys in it. Seemed to work when I turned the switch. Also the keys work on the door locks. Original Datsun key there too. The engine had a N47 head, not sure if that is good or bad. But it also looked like it had a set of headers on it. I didn't inspect them too closely, but somebody may want to snag em: Quote Link to comment
Lordmodelbuilder Posted November 21, 2011 Report Share Posted November 21, 2011 11-20-2011 Ecology Auto Parts.27600 Sierra Del Sol Road, Thousand Palms, CALIF. 92276 1974 240Z. Quote Link to comment
Rockatansky620 Posted November 21, 2011 Report Share Posted November 21, 2011 This truck has been for a few months located in Adelanto, CA on 395 just north or Victorville. I have not seen it. These were sent to Me by Guy Gray just prior to Him pulling some parts. After that, Chop Derek went up and pulled the hood and steering wheel. Very sad as this could have been a very nice project truck. If You ever wanted a GT spoiler shell, these are about the 2 nicest surviving examples that have surfaced in a very long time. Better hurry on either one. Don't worry about the price, You can not go back in time and find GT spoilers anymore. Even if You could, todays prices would be much, much more than what the wrecking yard wants. Jason looked at it last Sunday and the wheels were gone. It won't last much longer before being crushed. HOOLLLLYY crap i wish there was a square headlight conversion like this closer to me.. I'm dying for one!! Quote Link to comment
fuzz's '71 510 Posted November 21, 2011 Report Share Posted November 21, 2011 11-20-2011 Ecology Auto Parts.27600 Sierra Del Sol Road, Thousand Palms, CALIF. 92276 1974 240Z. Would you grab the rims and ship them for me?? Fuzz Quote Link to comment
jon521 Posted November 22, 2011 Report Share Posted November 22, 2011 i went to turner pick a part today, they had 5 620s, 2 or 3 of which had L20b. no EL dizzys.....one 521 with a J motor missing the bed and windsheild. many 620 grills! oh! and 2 sets of datsun mudflaps Quote Link to comment
jefe de jefes Posted November 22, 2011 Report Share Posted November 22, 2011 Spokane Pull and Save, there is a 65 NL320 pickup that has bumperettes. Good condition, would need to be rechromed. Grill is intact, as are taillights. Truck is mostly complete, some rust, got blasted in the driver's door, but not horrible. Let me know if anyone seriously needs something that can be shipped and I'll try and grab a few parts. -Matt 2O8-Six 6 O - 8 3 2 1 Send me a text for the quickest response. Do you own a sawzall? Quote Link to comment
wayno Posted November 23, 2011 Report Share Posted November 23, 2011 Do you own a sawzall? It's not a NL, it is a 65 datsun L320 truck, I sorta freaked when I read that post, as he had already pulled some parts off of it for me, then I found out it might have been a NL, I sent photos of parts I wanted off the NL, detailed photos, then he PMed me not to freak out, it was just a L320, the bed was separate. LOL I am looking for these parts, the first two photos are the corner pieces just behind the doors, and the last is of the pieces below the taillight bezels, I have rust issues in these parts, and need replacement pieces. Also steriod needs the trim around the box, burrito needs better taillight bezels, ect. ect. Quote Link to comment
jefe de jefes Posted November 23, 2011 Report Share Posted November 23, 2011 I need a pair of these as well. Maybe just 1 Quote Link to comment
ptown green Posted November 24, 2011 Report Share Posted November 24, 2011 Theres a 620 at the pick n pull in sherwood with an early l16 ribbed exhaust manifold. I was gonna go get it and ceramic finish it for a backup but someone may beat me to it Quote Link to comment
Dguy210 Posted November 24, 2011 Report Share Posted November 24, 2011 Sacramento Pick-n-pull 11/23/11 (1/2 off sale tomorrow 9-3). Also had a 280z, and 300zx I didn't get pictures of. Relatively clean 210, only missing the trans, and had a smack in the rear bumper. Seats were relatively nice, engine was intact, had A/C but looked like the compressor had probably seized. Non-Datsun stuff: Sad to see this sweet little Subi in there, seats were excellent. And then there was this '72 Hilux, just came on the yard as I was there. Heavily modified, old chevy carb. Quote Link to comment
king bee66 Posted November 24, 2011 Report Share Posted November 24, 2011 damn too bad you have a '74. those 210 seats are nice Quote Link to comment
ggzilla Posted November 25, 2011 Author Report Share Posted November 25, 2011 Pick-n-Pull 50% off sale today through Sunday -- print out the coupon at http://www.picknpull.com Lynnwood supposedly has (per http://www.picknpull.com/check_inventory.aspx): * 1974 B210 * 1980 720 pickup Arlington * 1982 720 * 1973 620 * 1976 280Z * 1977 280Z Tacoma * 1982 720 * another 1982 720 Quote Link to comment
RedBanner Posted November 25, 2011 Report Share Posted November 25, 2011 5 corners pnp, has,4 dattos , 620 complete with webber, 521 complete with bad ass 2 piece alum mags, 78 b210 4 door sedan complete 4 speed, 200sx no struts Quote Link to comment
wayno Posted November 26, 2011 Report Share Posted November 26, 2011 Pick-n-Pull 50% off sale today through Sunday -- print out the coupon at http://www.picknpull.com Lynnwood supposedly has (per http://www.picknpull...nventory.aspx): * 1974 B210 * 1980 720 pickup Arlington * 1982 720 * 1973 620 * 1976 280Z * 1977 280Z Tacoma * 1982 720 * another 1982 720 ggzilla is right here, print the coupon and go now if you need anything, a week ago they wanted over $118.00 for a set of nissan truck rear gears(pumpkin), I just picked up two sets for just under $115.00 I found my 354 gearset finally, and it wasn't made of gold like one would have thought last week. Have a good holiday weekend everyone. wayno Quote Link to comment
Rustina 510 Posted November 26, 2011 Report Share Posted November 26, 2011 Anyone know a yard that has some 280zx struts? In the Portland area Quote Link to comment
brodster Posted November 30, 2011 Report Share Posted November 30, 2011 Anyone know a yard that has some 280zx struts? In the Portland area There's a guy down in Gresham area that has a ton of 280zx part cars. He is supposed to be pulling a set of struts for me. I am trying to find his number. PM me if you are interested. Quote Link to comment
Lordmodelbuilder Posted December 5, 2011 Report Share Posted December 5, 2011 12-4-2011. 1974 620 Datsun. Had an 1800 engine. Pick-A-Part 3760 Pyrite Street. Riverside,Calif. 12-4-2011. 1978 Chevrolet Luv. Pretty much stock other then the grill. Pick-A-Part 2025 S.Milliken Ave.Ontario,Calif.91761 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.