jesusno2 Posted July 9, 2011 Report Share Posted July 9, 2011 Figured id kick this one off with some beautifull examples of how NOT to weld!! Quote Link to comment
Master-O-Turbonics Posted July 9, 2011 Report Share Posted July 9, 2011 $ enough to buy -AN fittings for the turbo but not to purchase a turbo manifold.... freaking stupid. Quote Link to comment
dennis Posted July 9, 2011 Report Share Posted July 9, 2011 Nothing a little bondo and a grinder cant fix Quote Link to comment
Wide14u Posted July 9, 2011 Report Share Posted July 9, 2011 the good thing about the weld at least its not on my car 1 Quote Link to comment
flatcat19 Posted July 9, 2011 Report Share Posted July 9, 2011 So much fail, yet this thread is full of win. Quote Link to comment
]2eDeYe Posted July 9, 2011 Report Share Posted July 9, 2011 It's barely started :P No closeups of this one...but you can see the fail from here. Who needs correct steering geometry and suspension travel? Not this guy :lol: I should have gotten pictures of the body kit and headlight swap, but I didn't think to, as I was over awed by the superior engineering applied to the suspension. Love pull a part for the lulz...I mean pick n pull :rolleyes: Got more in my archives, will have to dig through them. Quote Link to comment
H5WAGON Posted July 9, 2011 Report Share Posted July 9, 2011 That shit is adjustable.....He could raise it one or two links for best ride....:P Poor K&N filter. Quote Link to comment
yello620 Posted July 9, 2011 Report Share Posted July 9, 2011 http://rlcanon.sw.utexas.edu/taco/scarysteering.html Some complete engineering FAILS on this page, and the site owners text is hilarious too. Quote Link to comment
flatcat19 Posted July 9, 2011 Report Share Posted July 9, 2011 http://rlcanon.sw.ut...rysteering.html Some complete engineering FAILS on this page, and the site owners text is hilarious too. Every bit of that thread made me cringe. I live out in Backwoods, USA. I see so much of that shit. There's an Explorer here in town. When I see him in my rearview, I pull the fuck over. I'd rather watch him tip, than be under him tipping. Quote Link to comment
Hardwyre Posted July 9, 2011 Report Share Posted July 9, 2011 Wait... what... am I... fuck I am!!!! That dumb son of a bitch fail-welded the whole body carriage bracked like three inches off of the frame where it seems to have promptly collapsed! Scares the shit out of me knowing people are DRIVING VEHICLES LIKE THIS! Jesus Christ! Even my shittiest welds are better than that manifold. But hey, give the dude/kid credit for putting in the effort. It takes hours to make something that ugly. Quote Link to comment
Hardwyre Posted July 9, 2011 Report Share Posted July 9, 2011 http://rlcanon.sw.ut...rysteering.html Some complete engineering FAILS on this page, and the site owners text is hilarious too. Hell, I didn't get past his first reply before I just lost my monkies. There you go! No "safe to drive" or "showcase my fab skills" or even "get me some in-bred slack jawed yokel pussy", just taller 'n the other fuckwipes in town. Way to focus that laser beam intellect on a single objective! I'm sure you'll go far. Quote Link to comment
jesusno2 Posted July 11, 2011 Author Report Share Posted July 11, 2011 this one is funny i like the torch twirl! LMAO!! http://www.ebaumsworld.com/video/watch/80921330/ Quote Link to comment
pharouh Posted July 11, 2011 Report Share Posted July 11, 2011 :blink: :rofl: OMG! Some people should not be allowed to weld! I use only the best angle iron for my monster trucks! :hyper: Quote Link to comment
jesusno2 Posted July 19, 2011 Author Report Share Posted July 19, 2011 Here is another beauty! Quote Link to comment
Rhapakatui Posted July 9, 2012 Report Share Posted July 9, 2012 My cousin just sent me this pic from a refinery not to be named. What the Fuck is a cutting torch? Quote Link to comment
metalmonkey47 Posted July 9, 2012 Report Share Posted July 9, 2012 Because race truck? Quote Link to comment
Z-train Posted July 9, 2012 Report Share Posted July 9, 2012 Here is another beauty! The plate should read:"UNabled". Quote Link to comment
ggzilla Posted July 9, 2012 Report Share Posted July 9, 2012 Using a diamond cut off wheel to get smooth cuts is crazy. A cutting torch will be close enough for ratsun work, right? Quote Link to comment
Z chopper Posted July 9, 2012 Report Share Posted July 9, 2012 Here is another beauty! God bless American Ingenuity :rofl: Quote Link to comment
Rhapakatui Posted July 9, 2012 Report Share Posted July 9, 2012 Using a diamond cut off wheel to get smooth cuts is crazy. A cutting torch will be close enough for ratsun work, right? Using $50 worth of cutting wheels and 5 hours on the clock to do what a fabricator should have done in 30 minutes with 50cents worth of oxygen and acetylene and a grinder should be good enough to get you AND your foreman fired. That's 3/4" plate. Not some flimsy guaged sheet metal. ... I forgot to mention destroying a $125 grinder. I'd put my paycheck on that grinder burning up before hes done . Quote Link to comment
jrock4224 Posted July 9, 2012 Report Share Posted July 9, 2012 im sure he is already on the forth one by now... that turbo manifold wasnt that guy on here and took a pic of his friends rx7 second gen that had some wierd induction and he had video of him burning out in the driveway of his own house....seems to me that pretty much epitomizes this thread Quote Link to comment
jrock4224 Posted July 9, 2012 Report Share Posted July 9, 2012 and on the hard body redeye.....wouldn't it have been faster to make new coils from scratche then a three inch stock body lift....i like the 2x3 tubing as a after thought... Quote Link to comment
Hardwyre Posted July 11, 2012 Report Share Posted July 11, 2012 Because race truck? What - The - Raptor - Christ - ? Quote Link to comment
68Datsun510 Posted July 11, 2012 Report Share Posted July 11, 2012 Keep it comin! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.