josh_t Posted February 26, 2012 Report Share Posted February 26, 2012 Here are pics of the 521 in oakland pnp. it was pretty beat up and there weren't many good parts left. rear glass was good. windshield was not. Also there's a 1978 510 4dr. wonder how much it would be for someone to yank the engine cross member out from under that 510 and ship it over to the east coast. Quote Link to comment
king bee66 Posted February 26, 2012 Report Share Posted February 26, 2012 an a10 x-member isnt a bolt in for b210s, they're too wide Quote Link to comment
josh_t Posted February 27, 2012 Report Share Posted February 27, 2012 i thought they could be redrilled? on a side note, the early 510 x member is a bolt in IIRC. Quote Link to comment
GreaseMonky Posted February 27, 2012 Report Share Posted February 27, 2012 Has anyone gotten out to the San Jose North PNP? Shows a 73 610 on the online inventory. I wonder if anybody has aswell and would be willing to maybe ship me some parts Quote Link to comment
KhausticMess Posted March 4, 2012 Report Share Posted March 4, 2012 Has anyone been out to the Tacoma Pick n Pull and seen the 80 and 81 pickups currently in the yard ? Quote Link to comment
hobbes_the_cat Posted March 4, 2012 Report Share Posted March 4, 2012 Has anyone been out to the Tacoma Pick n Pull and seen the 80 and 81 pickups currently in the yard ? I was there today and saw them. One is a l20 /5 speed with a 210 head. The other is a z motor. Both are kinda picked over, pretty beat lookin. One was a king cab. Quote Link to comment
KhausticMess Posted March 4, 2012 Report Share Posted March 4, 2012 thanks, I might check it out need a couple random things for my kingcab. Quote Link to comment
wayno Posted March 5, 2012 Report Share Posted March 5, 2012 Seen these in the foster rd. yard, green one is a new one there. Quote Link to comment
littlejason Posted March 5, 2012 Report Share Posted March 5, 2012 Ha ha, wayno, I took a picture exactly like your first one. Quote Link to comment
ggzilla Posted March 6, 2012 Author Report Share Posted March 6, 2012 Fairfield Pick-n-Pull on Thursday. Supposed to have a Datsun but i didn't see it. 1986 Nissan Sentra Quote Link to comment
Will Posted March 11, 2012 Report Share Posted March 11, 2012 So I made my trip to some Las Vegas area yards - the two "Pick-a-Part" yards. I'd never been to a yard that had used concrete to make a base for all of the cars to set on, but it sure made getting around easier - especially since I was wheeling around my suitcase. The North Vegas yard didn't have any Datsun cars, just a picked-over 620 and maybe 2 720s The Henderson yard was a lot more useful. 2 280Z 2+2s and a 280ZX, a 620 and a few more 720s. Super-rare El Sentrino This Datsun Z had an offical Nissan oil filter and air filter - the mechanicals might be good! 300zx, Knight Rider Edition Quote Link to comment
wayno Posted March 19, 2012 Report Share Posted March 19, 2012 I was at the vancouver wa. "pick n pull" yesterday, the roadster is gone BTW. They had a couple fiat convertibles that were for sale, they are now in the yard, one had a fairly good set of datsun roadster style looking bucket seats, black in color. Quote Link to comment
Kramer1981 Posted March 20, 2012 Report Share Posted March 20, 2012 I was ata friends junkyard today, a 260 thats rusted beyond help, same for the 280 z and zx cars. There is a VERY nice 720 4x4 minus motor and trans that will die soon, a few other trucks rusted into the groud, but what caught my attention was a little white 512 pickup, motor had been picked over and it was missing a wheel, BUT it had very little rust, no major body damage, floors looked intact without me crawling underneath, overall a good little truck. Ill go take pics tomorrow. IF ANYONE WANTS THIS TRUCK IT CAN BE BOUGHT FOR A LITTLE OVER SCRAP PRICE. SO SPEAK UP. Dont worry about storage, I can store until pickup. Quote Link to comment
240ADAM Posted March 24, 2012 Report Share Posted March 24, 2012 So I checked the Pick and pull inventory and the Vancouver says there is a 71 Z and the Portland says there is a 72. I really need a pass side front clip for one, if anyone goes to one of these yards could they please check them out for me and pics would be great. I'm willing to drive down there if there is a useable one. Any help is much appreciated. You could text me pics at 425 314 8646. Quote Link to comment
DREWSDIME Posted March 24, 2012 Report Share Posted March 24, 2012 50% off sale at Pick A Part tomorrow Quote Link to comment
wayno Posted March 25, 2012 Report Share Posted March 25, 2012 So I checked the Pick and pull inventory and the Vancouver says there is a 71 Z and the Portland says there is a 72. I really need a pass side front clip for one, if anyone goes to one of these yards could they please check them out for me and pics would be great. I'm willing to drive down there if there is a useable one. Any help is much appreciated. You could text me pics at 425 314 8646. OK, I looked at the Z car in the portland yard. This is the pass. side fender well, I personally think it is toast, lot of rust and holes here. Drivers side fender well, this side looks decent. Quote Link to comment
wayno Posted March 25, 2012 Report Share Posted March 25, 2012 Found this in the yard also, The engine compartment looked complete, and it was a "tee top". Rearend was still in it. Quote Link to comment
wayno Posted March 25, 2012 Report Share Posted March 25, 2012 I forgot what this was, but it had a napZ engine, and a 5 speed, the top of the bellhousing was smooth. This was also in there, it was a new one for that yard, all the switches were gone, as well as the door locks, the head was gone, and it was a L18 block, I forget if all 4 stock wheels were there, and I forgot to look at the windshield, it has one, but I don't know if it is good. It had a decent gas tank filler neck, so I grabbed it with the gasket and rubber tube connecting it to the tank. As you can see I also grabbed the only decent marker lenses on the truck, the buckets for them lenses were toast, there were no wires connected to the buckets, they had rusted off many years ago. I also got the rear marker light rubber mounts, as the housings were very rusty, the rubber came off them easily, and I grabbed the dome light assembly as an after thought, as some have been asking about them. Quote Link to comment
Will Posted March 25, 2012 Report Share Posted March 25, 2012 ...looks like it's facing a Datsun 310 too! Quote Link to comment
wayno Posted March 26, 2012 Report Share Posted March 26, 2012 ...looks like it's facing a Datsun 310 too! Seems like I would have noticed another datsun right there, but maybe it is a 310. Quote Link to comment
thisismatt Posted March 26, 2012 Report Share Posted March 26, 2012 Is there anyone here that could sawzall off these bed corners for me?!?! Quote Link to comment
Laecaon Posted March 26, 2012 Report Share Posted March 26, 2012 Is there anyone here that could sawzall off these bed corners for me?!?! If I had a sawzall I would... And Wayno! if you ever make it there again, please check the windshield! It is a bit of a drive for me. Quote Link to comment
crackerjack69 Posted March 26, 2012 Report Share Posted March 26, 2012 Don't think they'll let you in w/ a sawzall... Quote Link to comment
Laecaon Posted March 26, 2012 Report Share Posted March 26, 2012 Don't think they'll let you in w/ a sawzall... I have seen it at the North Portland PnP... Quote Link to comment
thisismatt Posted March 26, 2012 Report Share Posted March 26, 2012 Don't think they'll let you in w/ a sawzall... well dub tee eff mang. Someone throw me a bone Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.