BrothersGarage Posted June 23, 2020 Report Share Posted June 23, 2020 1 hour ago, banzai510(hainz) said: Thanks it worked, I can post photos ezer Man, I take good pictures 😄 4 Quote Link to comment
banzai510(hainz) Posted June 23, 2020 Report Share Posted June 23, 2020 11 minutes ago, BrothersGarage said: Man, I take good pictures 😄 Nice Datsuns make you look like you take good pictures 1 1 Quote Link to comment
d.p Posted June 23, 2020 Report Share Posted June 23, 2020 Look at Hainz all grown up! Posting pics, you go boy! Is that your truck Hainz?? if it is I have never seen it to this day. 1 Quote Link to comment
greenthumb Posted June 23, 2020 Report Share Posted June 23, 2020 Had to try this ‘new method’ 3 Quote Link to comment
greenthumb Posted June 23, 2020 Report Share Posted June 23, 2020 Hmmm. So easy 1 Quote Link to comment
banzai510(hainz) Posted June 23, 2020 Report Share Posted June 23, 2020 yes that my Green truck I had since Jan2000 for 700$. really got as a throw away but I haven't thrown it away yet. smashed it and straighten it out and put a Ninja decal over the area and looks Ok again. 3 Quote Link to comment
gene knight Posted June 25, 2020 Report Share Posted June 25, 2020 (edited) On 6/23/2020 at 9:26 AM, Nath96 said: Thank you nice RHD 521 Edited June 25, 2020 by gene knight 3 Quote Link to comment
yenpit Posted June 26, 2020 Report Share Posted June 26, 2020 On 6/23/2020 at 2:23 PM, banzai510(hainz) said: yes that my Green truck I had since Jan2000 for 700$. really got as a throw away but I haven't thrown it away yet. smashed it and straighten it out and put a Ninja decal over the area and looks Ok again. ..............we would like to see that custom Ninja vinyl work! 😁 1 Quote Link to comment
banzai510(hainz) Posted June 26, 2020 Report Share Posted June 26, 2020 (edited) I got this one as to help hide the hammer pings but its good enuff Edited June 26, 2020 by banzai510(hainz) 3 Quote Link to comment
datzenmike Posted June 26, 2020 Report Share Posted June 26, 2020 On 6/25/2020 at 12:27 AM, gene knight said: nice RHD 521 Needs, lower. 3 Quote Link to comment
Nath96 Posted July 24, 2020 Author Report Share Posted July 24, 2020 I've received a shipping date and the truck should be leaving Thailand July 29th 😁 so hopefully this time next month I should be able to sit in it 2 Quote Link to comment
wayno Posted July 24, 2020 Report Share Posted July 24, 2020 Good for you, I hope for you it is in good condition(turn key). 3 Quote Link to comment
Nath96 Posted August 26, 2020 Author Report Share Posted August 26, 2020 So the truck should finally be here next week and I'm so excited 😁 does anyone know if there's any conversion kits available just the pcd is 6x139.7 and I dont really like the wheels on the truck or any new ones I can find online, thanks 2 Quote Link to comment
d.p Posted August 27, 2020 Report Share Posted August 27, 2020 (edited) 10 hours ago, Nath96 said: So the truck should finally be here next week and I'm so excited 😁 does anyone know if there's any conversion kits available just the pcd is 6x139.7 and I dont really like the wheels on the truck or any new ones I can find online, thanks no man. Has to be custom and you can find some decent old school JDM 6x139s it might just take a while. Edited August 27, 2020 by d.p 5 Quote Link to comment
Nath96 Posted September 19, 2020 Author Report Share Posted September 19, 2020 Its finally here nearly a month later them planned but its here, so I was wondering if anyone knows what size the wheel nuts are so I can get some new ones as I'm missing a couple 2 Quote Link to comment
thisismatt Posted September 19, 2020 Report Share Posted September 19, 2020 7/16-20 2 Quote Link to comment
DanielC Posted September 19, 2020 Report Share Posted September 19, 2020 All the body bolts are SAE, measured in inches, and the fine thread version of the bolts. Engine and transmission are metric. Engine fluid holes are a British standard, you would know more about that. 2 Quote Link to comment
Nath96 Posted September 19, 2020 Author Report Share Posted September 19, 2020 Thank you both 1 Quote Link to comment
Nath96 Posted October 31, 2020 Author Report Share Posted October 31, 2020 Just a quick one does anyone know the best way to remove the rear hubs? Just wanna check they pull straight off with an extractor and there's no special way of getting them off, thanks 1 Quote Link to comment
Crashtd420 Posted October 31, 2020 Report Share Posted October 31, 2020 16 minutes ago, Nath96 said: Just a quick one does anyone know the best way to remove the rear hubs? Just wanna check they pull straight off with an extractor and there's no special way of getting them off, thanks The axle or the hub assembly off the axle? The hub is basically pressed into the backing plate..... I'm trying to figure this out right now to be honest with you.... What are you up too? Disk brake conversion? This video has a spot where he is removing the hubs.... 1 1 Quote Link to comment
Nath96 Posted October 31, 2020 Author Report Share Posted October 31, 2020 Thank you very much, just pulling the hub off at the minute as all the studs are different sizes there's a mix of m14 and m12 so I'm going to drill them all to 14 and fit new studs, disc conversion will be happening next year though 1 Quote Link to comment
Nath96 Posted October 31, 2020 Author Report Share Posted October 31, 2020 Oh so do I have to pull the full axle? 1 Quote Link to comment
Crashtd420 Posted October 31, 2020 Report Share Posted October 31, 2020 1 minute ago, Nath96 said: Oh so do I have to pull the full axle? The assembly looks like this..... You dont need the hub removed from the backing plate just the axle from the hub.... from what I can tell the bearing has a keeper nut but the bearing is actually pressed on the axle shaft.... So you'll need to remove the axle which is the 4 nuts on the back and then remove the bearing to get the hub off.... Might as well put new seals on and maybe a new bearing while your in there... 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.