MicroMachinery Posted May 20, 2014 Report Share Posted May 20, 2014 Honestly, I'd probably only do some minor cosmetic changes(not seeing the body work needed, but would address as necessary). The blue accents under the hood(coil holder, voltage regulator, relays, air cleaner, etc..) I would probably change to different colors.. maybe red or just cadmium coat the hold down, regulator and relays, then do something different for the air cleaner; I like the red/black color scheme, but the blue just clashes too much for a clean truck that's not trying to clash. As for wheels, perhaps go with painted stock steelies(probably red to match the truck) with dog dish hub caps, or find a really neat set of Japanese 6 lug wheels(wouldn't use the blue lug nuts here, either). I'd put some rubber pedal covers on the pedals, as well. I like the box(it matches the shape and color scheme of the truck), but would most likely only use it from time to time(long trips, overnight stays, etc..). It's a super sweet, clean truck that I always enjoy seeing. I wouldn't want to do too much to it, because like Tristin said, it's basically done. I'd maintain it, detail it, garage it, take it to shows to share and enjoy the cleanest truck I'd ever owned. 2 Quote Link to comment
wayno Posted May 20, 2014 Report Share Posted May 20, 2014 I can't make the pic show If you were to get this truck, what would you do to it? It has an L-16 W/ Weber, and 4 speed, lowered 2 inches Not talking about selling or any money here, just what you would do Needs some minor body work %5BIMG%5Dhttp://i246.photobucket.com/albums/gg85/Rick-rat/ca5.jpg Do the body work and drive it, it actually looks fine in the photo. Why you are asking is the question, I hope your alright. Quote Link to comment
izzo Posted May 20, 2014 Report Share Posted May 20, 2014 I would preserve it... Lose the center caps... And just enjoy it.. Park it in the garage so it stays nice.... Truck box can stay or go, I've had one in my truck and it was handy... Till I had to haul something :| lol. Quote Link to comment
Fat510 Posted May 20, 2014 Report Share Posted May 20, 2014 Are you going to try something new for your truck, rick? if you're trying to mix it up, the first thing you should get a pair of these bad boys. i was going to polish and put them on my wagon then you should put the higher overdrive ZX 5speed like i got to make to bring the RPMs down, and but wouldnt lower it be cause it probably rides like a caddy, but i dont know what rims to recommend because i dont know what rims would fit over your disk brakes then you could take it to local meets as a different change of pace for your truck. but definately leave it red, to go with your santa claus beard :lol: Quote Link to comment
Jester Posted May 20, 2014 Report Share Posted May 20, 2014 I kinda liking the other suggestions of the Chevy rally wheels. They look great on these trucks. Not sure about the 720 tie downs...........as much as I like to use other model Datsun parts on my trucks, those just aren't working for me. Whatever you do it will be great. It IS a clean little truck! 1 Quote Link to comment
tdaaj Posted May 20, 2014 Report Share Posted May 20, 2014 Just change the wheels out. Not rallys, every one has them. I personally like old school mags. The rest is just fine. 1 Quote Link to comment
roadsterman Posted May 20, 2014 Report Share Posted May 20, 2014 i like those wheels also , but i would put on a set of 15" gun metal gray nissan frontier wheels and tires that i have waiting to go on a truck but then drive it . Quote Link to comment
Rhapakatui Posted May 20, 2014 Report Share Posted May 20, 2014 I miss the thumbs down button. 2 Quote Link to comment
bananahamuck Posted May 20, 2014 Report Share Posted May 20, 2014 I miss the thumbs down button. Well i thought about tearing it all apart and then letting it sit for many years ,, but there is already a few guys doing that. Oh snap. 3 Quote Link to comment
Tristin Posted May 20, 2014 Report Share Posted May 20, 2014 then letting it sit for many years Rick doesnt have many years... Quote Link to comment
dr.feltersnatch Posted May 20, 2014 Report Share Posted May 20, 2014 OK guys, I am looking for honest answers of what you would do if the truck was given to youI would say thank you rick, then drive the shit out of it. 1 Quote Link to comment
q-tip Posted May 20, 2014 Report Share Posted May 20, 2014 I would start driving it to Datsun meets....... 3 Quote Link to comment
izzo Posted May 20, 2014 Report Share Posted May 20, 2014 Go ahead and gimmy dat truck rick.... I'd even sign a contract saying I couldn't sell it, stuck with it for life :rofl: I know a guy down the street that owes me a life time full of favors... and has a nice big heated garage that would make a nice home in! :D Hope all is well your way dude in all seriousness. If you're getting bored with your truck, there's some good suggestions listed here for turning a wrench... Also, just look at the 620 pic page.. some good ideas come about there. Quote Link to comment
]2eDeYe Posted May 20, 2014 Report Share Posted May 20, 2014 I would drive it and fix any issues that came up. Maybe find some stock wheels to coat grey with stock dog dishes and beauty rings. Take it to meets and keep it clean and tuned up, then when the granddaughter is old enough she would drive it to meets for me :) Quote Link to comment
Spoona_Jay21 Posted May 20, 2014 Report Share Posted May 20, 2014 drop it lower, maybe Pathfinder rims, and rock it like that. thats all =) Eventually I want a NICE 620, mine's a pile lol Quote Link to comment
Janksun Posted May 20, 2014 Report Share Posted May 20, 2014 In all sincerity, if someone gave me any vehicle, either due to being I'll or just the thought that I could take care of maybe better than them, I would take care of it very well. Baby her with fresh fluids and regular tune ups. Not change a single thing except maintenance wise. Then when I get older or I'll or whatever, hand it down to someone who could do well with it, just like the person before me did. 2 Quote Link to comment
Guest Rick-rat Posted May 24, 2014 Report Share Posted May 24, 2014 Thanks for the replies, when the time is near I will be in touch with 3 people. If you said needs lower, you're out, l20 or other swap, you're out, change wheels, you're out, 5 speed you're out, dual carbs, you're out Center caps and lug nut changes are OK, Big ass bumper stays, saved my rear lenses and tailgate more than once. The 4 speed in it will cruise the freeway approx. 3900 @70 4200@ 75. so it stays 4 speed and engine to remain 1600 If I do give this truck to someone they have to meet my terms Thanks 4 Quote Link to comment
datzenmike Posted May 24, 2014 Report Share Posted May 24, 2014 I would start driving it to Canby meets....... Quote Link to comment
Tristin Posted May 24, 2014 Report Share Posted May 24, 2014 You're a good man Rick. Anyone would be honored to be gifted such a clean truck. You've already taken such good care of it. It needs to be kept alive in the Datto scene and just maintained. I hope this isn't an indication of something forbidding close to come. Hope all is well in the Rat House. If you're thinking of getting out in any shape, I'd let bygones be bygones and show up to Canby. We all love you Rick and would like to see you one last time. :hug: 2 Quote Link to comment
Guest Rick-rat Posted May 24, 2014 Report Share Posted May 24, 2014 I have plans with family the weekend of Canby, so have a good time 1 Quote Link to comment
datzenmike Posted May 24, 2014 Report Share Posted May 24, 2014 Rick loose a bet???? Quote Link to comment
I'm BLUE Posted May 24, 2014 Report Share Posted May 24, 2014 It's a pleasantly tasteful clean truck you have there Rick.. well done on your part. I'd just drive it , and maintain it the way it is (any "changes" or money should go to gas , oil , anti-freeze , grease , consumables , and repair parts) Not a huge fan of the center caps , but that's growing on me over-time :) . Honestly the only person that should have this truck is you..... for a long time ! " There can only be one " Rick-rat. There's a lot of memory's that have yet to be made in this 620. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.