Cleopatra Jones Posted September 16, 2018 Report Share Posted September 16, 2018 7 hours ago, zacc said: hey guys!! so i really have no clue how to post pictures of things on here yet but i have a question for anyone who might know a thing or two. i’m trying to flush my heater core and i can’t find the damn hoses that go into my firewall. any idea where those are on a 1981 210? i’ve looked but probably not as hard as i should have. any help would be great!! I'm sure someone will respond with exact location but in the meantime I posted a PDF of the user manual and service manual here: Hope it helps. 1 Quote Link to comment
zacc Posted September 18, 2018 Report Share Posted September 18, 2018 On 9/16/2018 at 3:04 PM, colourbox said: I'm sure someone will respond with exact location but in the meantime I posted a PDF of the user manual and service manual here: Hope it helps. hey boss, i appreciate it a lot! turns out my heater core needed flushed but long story short i had to rip apart my heater blower assembly. got it back in but my linkage is a bit weirder now and i’m doing my best to make it whole again. is there maybe a diagram out there i could go off to assemble it correctly or do you maybe know someone who’s an expert with that shit? any kind of help would be appreciated. ?? Quote Link to comment
zacc Posted September 18, 2018 Report Share Posted September 18, 2018 On 9/16/2018 at 3:04 PM, colourbox said: I'm sure someone will respond with exact location but in the meantime I posted a PDF of the user manual and service manual here: Hope it helps. hey boss, i appreciate it a lot! turns out my heater core needed flushed but long story short i had to rip apart my heater blower assembly. got it back in but my linkage is a bit weirder now and i’m doing my best to make it whole again. is there maybe a diagram out there i could go off to assemble it correctly or do you maybe know someone who’s an expert with that shit? any kind of help would be appreciated. ?? Quote Link to comment
Cleopatra Jones Posted October 9, 2018 Report Share Posted October 9, 2018 (edited) Ok kids I need help. I'm thinking about changing Stanley's seat covers. If anybody with a 210 sedan has original covers can you post pics or just send them directly to me of your seats front and back? I went through this entire thread again to see if seats were posted and really only found one. I also found a site that showed pics of a very mint 210 hatchback which is where I got the below pics from. I'm digging this and am thinking vinyl with tweed. But before I completely make up my mind I'd like to see what else is out there that is stock. Edited October 9, 2018 by colourbox 1 Quote Link to comment
dukerollo Posted October 15, 2018 Report Share Posted October 15, 2018 Don’t know about the stock interior, cause mine was used a raccoon den/meth lab before I got it, but congrats for cleaning up at JCCS again! 1 Quote Link to comment
Cleopatra Jones Posted January 13, 2019 Report Share Posted January 13, 2019 Got a steering wheel cover from 'Wheelskins.' It takes an hour to put on but they are nice. They have a variety of custom leather wheel covers already in their system but if you have an obscure car you can send them measurements (like I did) and they'll make it for you at the same cost. I have one on my Pathfinder and decided to get one for Stanley. They made it too big first time around but they took it back, fixed it and resent. It looks pretty good. 2 Quote Link to comment
JayDilla Posted February 19, 2019 Report Share Posted February 19, 2019 hey new to forums. Been following for a few years but just recently made an account. Wondering how I’d go about posting pictures? Is there no way to extract photos directly from your phones photo gallery? Seems like most people have they’re pics on photo bucket and have to copy the URL? Thanks in advance Quote Link to comment
JayDilla Posted February 19, 2019 Report Share Posted February 19, 2019 http:// Quote Link to comment
JayDilla Posted February 19, 2019 Report Share Posted February 19, 2019 http:// Quote Link to comment
JayDilla Posted February 19, 2019 Report Share Posted February 19, 2019 http:// 1 Quote Link to comment
JayDilla Posted February 19, 2019 Report Share Posted February 19, 2019 http:// Quote Link to comment
JayDilla Posted February 19, 2019 Report Share Posted February 19, 2019 http:// Quote Link to comment
Charley Hudson Posted February 26, 2019 Report Share Posted February 26, 2019 On 6/1/2010 at 11:32 AM, metalmonkey47 said: Heres some oldddddd pics of mine and a new one. I DEMAND EVERYONE POSTS MORE PICS OF THEIR SUNNY!!!!! On 6/1/2010 at 11:32 AM, metalmonkey47 said: Heres some oldddddd pics of mine and a new one. I DEMAND EVERYONE POSTS MORE PICS OF THEIR SUNNY!!!!! Quote Link to comment
datzenmike Posted February 26, 2019 Report Share Posted February 26, 2019 But don't use Photobucket. All I see are nice car shots with... PROUDLY HOSTED BY PHOTOBUCKET printed over it. ☹️ Quote Link to comment
Dguy210 Posted February 26, 2019 Report Share Posted February 26, 2019 I'm feeling old now with realizing Metalmonkey's 210 wheel fuckery was 9 years ago. 3 Quote Link to comment
metalmonkey47 Posted February 27, 2019 Report Share Posted February 27, 2019 God that wheel fuckery was still the funniest shit to happen to me in a car. I never did figure out why it spit the wheel off twice. ? 2 Quote Link to comment
Cleopatra Jones Posted March 20, 2019 Report Share Posted March 20, 2019 Hey kids, I have a question about cleaning up the moulding around the front and back windshields and the haze that seems to have turned up around the windshield edges. I came really close to having brand new moulding for the back but the warehouse said it was damaged. Dang it! The windshield moulding and glass at this point is now the ugliest thing on the car. I need detailing tips. Please share the wisdom. You think it’s possible to have the moulding chromed or is that a bad idea cause lord knows what might happen to it? I’m thinking about chroming the bumpers. Share the knowledge! Quote Link to comment
Cleopatra Jones Posted March 21, 2019 Report Share Posted March 21, 2019 I found this video. It has good info if you can get paste the voice. I can't stop laughing long enough to watch the whole thing. Quote Link to comment
MattSheldon Posted February 7, 2020 Report Share Posted February 7, 2020 On 1/29/2016 at 12:41 AM, Abe Froman said: Anyone know the body kit details? I thought it was a Celica at quick glance! Quote Link to comment
head trauma johnny Posted February 7, 2020 Report Share Posted February 7, 2020 This company still makes this body kit for the 210(b310). https://www.panchkits.com/b-310 Quote Link to comment
MattSheldon Posted February 7, 2020 Report Share Posted February 7, 2020 6 hours ago, head trauma johnny said: This company still makes this body kit for the 210(b310). https://www.panchkits.com/b-310 Thanks Johnny. I have seen that kit and the fender flares are 1/2 the size as the ones shown above. TS seem to be smaller as well. Quote Link to comment
Hawaiian620 Posted March 20, 2020 Report Share Posted March 20, 2020 Picked up a set of Watanabe Type B wheels (14x6.5/+15) and used the 280 center caps. 3 Quote Link to comment
datsunfreak Posted March 20, 2020 Report Share Posted March 20, 2020 On 2/6/2020 at 11:44 PM, MattSheldon said: Anyone know the body kit details? I would bet money that is custom. Quote Link to comment
afracer Posted March 21, 2020 Report Share Posted March 21, 2020 On 2/7/2020 at 6:43 AM, head trauma johnny said: This company still makes this body kit for the 210(b310). https://www.panchkits.com/b-310 Holy crap, please tell me that's Australian or Canadian dollars and not USD! Those prices are INSANE Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.