uberkevin Posted June 2, 2016 Author Report Share Posted June 2, 2016 I'm off work at 3. Maybe ill see you before you leave the shop. I'll let you know tho 1 Quote Link to comment
bananahamuck Posted June 3, 2016 Report Share Posted June 3, 2016 Making exhaust with rusty scrap pieces .. B) Sounds like a really large bore VW beetle when you get on it. 6 Quote Link to comment
uberkevin Posted June 4, 2016 Author Report Share Posted June 4, 2016 It's going to be pretty loud driving down to Eugene. Fucken idle shit pissing me off, going To be reading this http://forums.nicoclub.com/iacv-aac-cleaning-and-testing-tutorial-t251133.html Might help. Mainly I can't really set the timing with the idle all over the place while warm.. I changed the plenum... that did nothing.. Not sure what I'll do next.. Hate the sound of my truck too.. so that sucks. Been stupid busy with other life shit. Sorry to the people I didn't see today that I said I would.. Banana I've got sunday off. 3 Quote Link to comment
KoHeartsGPA Posted June 4, 2016 Report Share Posted June 4, 2016 Earplugs are your friend! 2 Quote Link to comment
Rhino13 Posted June 4, 2016 Report Share Posted June 4, 2016 Yeah you could at least wear ear buds and listen to something to drown out the noise a bit until you pick Lexi up in Portland. Although it's probably better without music so you can hear anything going on with your truck. Hopefully nothing! 2 Quote Link to comment
q-tip Posted June 4, 2016 Report Share Posted June 4, 2016 Does the single cam ka have the adjustable iacv? I had an idle problem with my car for a long time until I found that fucking screw. 2 Quote Link to comment
bilzbobaggins Posted June 4, 2016 Report Share Posted June 4, 2016 Earplugs work only if the noise isn't causing a harmonic vibration in your body 1 Quote Link to comment
uberkevin Posted June 4, 2016 Author Report Share Posted June 4, 2016 Ding ding ding! ^^^ 1 Quote Link to comment
uberkevin Posted June 4, 2016 Author Report Share Posted June 4, 2016 Does the single cam ka have the adjustable iacv? I had an idle problem with my car for a long time until I found that fucking screw. Back of the plunum there's an adjustable screw.. Yesterday I turned that shot all the way in and I was still idling... oh and the other adjustable screw on the other side of the tps well that was out... Still idle.. so I've got a vacuum leak.. something.. 2 Quote Link to comment
KoHeartsGPA Posted June 4, 2016 Report Share Posted June 4, 2016 Earplugs reduce noise....duh 1 Quote Link to comment
q-tip Posted June 5, 2016 Report Share Posted June 5, 2016 Yeah, is fucked up somewhere for sure. 2 Quote Link to comment
bananahamuck Posted June 5, 2016 Report Share Posted June 5, 2016 maybe try switching out your idle control valve off that other engine ,, i would say you can use the one you "had" on that head you brought over,,,,,,,,,,,,,,,,,,,,,,,,,,,,, but since it bounced off the floor that end first ,,,,,,,,,,, it aint much good anymore. I read somewhere you can sometimes take it off and clean it real good and it works better. Have you actually TESTED your throttle position switch?? If the only problem is that the idle "hunts" why do you think it won't make it to Eugene ?? I think you told me the other night but i can't remember.. CAN'T DO SUNDAY ,,, tomorrow ,, graduation/getting his shit ready for going to University ,, might be traveling to coast 1 Quote Link to comment
]2eDeYe Posted June 6, 2016 Report Share Posted June 6, 2016 It's going to be pretty loud driving down to Eugene. Not sure what I'll do next.. Hate the sound of my truck too.. so that sucks. Time for a boomin system :lol: 2 Quote Link to comment
flatcat19 Posted June 6, 2016 Report Share Posted June 6, 2016 Time for a boomin system :lol: That'll take another 12 pages. 3 Quote Link to comment
hobospyder Posted June 6, 2016 Report Share Posted June 6, 2016 Dude he needs to figure out his engine first. Give him ten pages before he starts the booming system please 3 Quote Link to comment
q-tip Posted June 7, 2016 Report Share Posted June 7, 2016 Dude he needs to figure out his engine first. Give him ten pages before he starts the booming system please Nah, just start on it now, who needs it to run right when you got a booming system? 3 Quote Link to comment
uberkevin Posted June 7, 2016 Author Report Share Posted June 7, 2016 That'll take another 12 pages. Dude he needs to figure out his engine first. Give him ten pages before he starts the booming system please Nah, just start on it now, who needs it to run right when you got a booming system? Pretty sure here's what make shit 12 pages... 3 Quote Link to comment
flatcat19 Posted June 7, 2016 Report Share Posted June 7, 2016 You don't need our help to shit on 12 more pages of your thread. 4 Quote Link to comment
q-tip Posted June 7, 2016 Report Share Posted June 7, 2016 You don't need our help to shit on 12 more pages of your thread. Fact. 2 Quote Link to comment
hobospyder Posted June 7, 2016 Report Share Posted June 7, 2016 Could be worse, it could be a tanker thread. But really were just trying to help you along 1 Quote Link to comment
flatcat19 Posted June 7, 2016 Report Share Posted June 7, 2016 Could be worse, it could be a tanker thread. But really were just trying to help you along I'd be happy to help push this thing off a ledge. 2 Quote Link to comment
uberkevin Posted June 7, 2016 Author Report Share Posted June 7, 2016 I bet.. you just love getting rid of Datsuns. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.