510Chad Posted January 23, 2012 Report Share Posted January 23, 2012 Changed out the fuel pump. No more leakage. Quote Link to comment
dbann89 Posted January 23, 2012 Report Share Posted January 23, 2012 Cleaned up the engine bay.... BEFORE AFTER pictures don't do it justice. Quote Link to comment
Peter_Pablo Posted January 23, 2012 Report Share Posted January 23, 2012 i put this emblem to my grill sweett Quote Link to comment
ggzilla Posted January 23, 2012 Report Share Posted January 23, 2012 Looks good! Quote Link to comment
dbann89 Posted January 24, 2012 Report Share Posted January 24, 2012 just did yellow high beams and grille emblem BEFORE AFTER Quote Link to comment
510Chad Posted February 5, 2012 Report Share Posted February 5, 2012 Wired a relay to the starter solenoid. No more click click click.... Quote Link to comment
kezark31 Posted February 8, 2012 Report Share Posted February 8, 2012 made the 521 column collapsible and shortened it 3 inches Quote Link to comment
ggzilla Posted February 8, 2012 Report Share Posted February 8, 2012 How'd you make it collapsible? Did you swap in a non-521 column? Quote Link to comment
kezark31 Posted February 8, 2012 Report Share Posted February 8, 2012 cut out 14 inches of the stock column and added a collapsible section, not that hard really feels like a have a lot more room in the cab with the wheel out of my chest. the new section consist of a u joint and a telescopic section Quote Link to comment
jon521 Posted February 11, 2012 Report Share Posted February 11, 2012 Took the front cover off and unbolted the head Quote Link to comment
Farmer Joe Posted February 11, 2012 Report Share Posted February 11, 2012 made the 521 column collapsible and shortened it 3 inches what upper control arm is that.. looks like a later model arm, bolted on the stock 521 frame... Quote Link to comment
Peter_Pablo Posted February 11, 2012 Report Share Posted February 11, 2012 made the 521 column collapsible and shortened it 3 inches i do the same thing to my 620 and change the steering wheel too and adapted new struck shocks rancho :D my mini titan the struts shock need to be cleaned but they are in great shape Quote Link to comment
skyblue Posted February 13, 2012 Report Share Posted February 13, 2012 swapped out warped front brake drum and adjusted brakes. Quote Link to comment
510Chad Posted February 13, 2012 Report Share Posted February 13, 2012 Re-sync'd the SU's at idle and off idle. Went for a drive. MUCH better. Now I need air filters. AND to re-do the cable linkage.... Quote Link to comment
Guest Rick-rat Posted February 15, 2012 Report Share Posted February 15, 2012 Finally took mine out of the carport today and just drove it a little around the park we live in and down one of the mainroads about a mile, First time it has been out since my operation on Dec 13. Wife still doesn't think I should be driving, but I snuck out while she was at work. Truck I think was happy to get out and move some, ran great,can't wait to take a longer run with it and maybe get out to some meets soon. It makes me sad that I can look out my window and just see it sitting there and I know it wants to be going down the road, as do I. Hopefully won't be too much longer and I can escape for some short road trips Quote Link to comment
kezark31 Posted February 16, 2012 Report Share Posted February 16, 2012 what upper control arm is that.. looks like a later model arm, bolted on the stock 521 frame... there 620 arms fliped upside down and swaped sides Quote Link to comment
TENDRIL Posted February 16, 2012 Report Share Posted February 16, 2012 looked at it sitting in my garage sad because im waiting for a new front end..... :( Quote Link to comment
ggzilla Posted February 16, 2012 Report Share Posted February 16, 2012 Took my carb apart for the THIRD time and cleaned it up. This time i was more thorough. Now it is idling again. Sprayed carb clean through all these passages I love these carbs! Simple as a weber 32/36, but better because you can see the fuel level when installed! Quote Link to comment
crackerjack69 Posted February 16, 2012 Report Share Posted February 16, 2012 Mock up to make template for vinyl stripes :) Quote Link to comment
gene knight Posted February 18, 2012 Report Share Posted February 18, 2012 my updated info is on project datto listed under Grimace with pix Quote Link to comment
DAT510 Posted February 18, 2012 Report Share Posted February 18, 2012 got it running!!!!! :lol: :lol: :lol: :lol: J13s are quiet! Quote Link to comment
Jayden71 Posted February 18, 2012 Report Share Posted February 18, 2012 Vacuumed out the inside, drove it Quote Link to comment
Farmer Joe Posted February 18, 2012 Report Share Posted February 18, 2012 i looked at it sittin in the street... Quote Link to comment
chester Posted February 18, 2012 Report Share Posted February 18, 2012 Well I ran into the back of it with the pathfinder :blink: Quote Link to comment
Siempreloco Posted February 18, 2012 Report Share Posted February 18, 2012 Well I ran into the back of it with the pathfinder :blink: YOU DO NOT DO THAT, THAT IS NOT RIGHT, YOU ARE DOING IT ALL WRONG. Is the truck okay? 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.