Guest Rick-rat Posted June 6, 2010 Report Share Posted June 6, 2010 Finished my disc conversion today finally Brake lines $ 75.00 New rotors $110.00 Brackets $150.00 Calipers $320.00 Wheels and ties that will fit $1,000.00 My Datsun tha stops in a straigh line now matter how hard you get on the brakes PRICELESS!!!!!! Still got to figure out the E-brake Quote Link to comment
Braden Posted June 6, 2010 Report Share Posted June 6, 2010 Finished my disc conversion today finally Brake lines $ 75.00 New rotors $110.00 Brackets $150.00 Calipers $320.00 Wheels and ties that will fit $1,000.00 My Datsun tha stops in a straigh line now matter how hard you get on the brakes PRICELESS!!!!!! Still got to figure out the E-brake WORD Quote Link to comment
datsunaholic Posted June 6, 2010 Report Share Posted June 6, 2010 Started tearing the parts truck down for real. I was going to repair the engine and use the chassis to test run it around the block, but since I've needed several parts to keep my daily running it's not worth it to replace those for one test run. Only thing I got done was a big one- got the engine/transmission out. That's not an easy thing especially when the cab mounts have failed, leaving less clearance. Quote Link to comment
Joss Posted June 6, 2010 Report Share Posted June 6, 2010 Traded my 75' 620 the other day for a couple peds, the new owner decided to destroy it within the hour, I cried. Quote Link to comment
Kyle253 Posted June 6, 2010 Report Share Posted June 6, 2010 Painted my wheels white, and took out two leafs for a little lower stance. Keeps getting better. Quote Link to comment
Craig Posted June 6, 2010 Report Share Posted June 6, 2010 today was day one in rebuild, i pulled off the: grill, hood, head, carb and intake, and aired up the tires. Quote Link to comment
Joss Posted June 6, 2010 Report Share Posted June 6, 2010 Thanks for that, I needed it. Quote Link to comment
mr68gts Posted June 6, 2010 Report Share Posted June 6, 2010 Got the floorboards sprayed in Por 15. Now I strip the rest of the cab and get it ready to paint inside. Should be fun! :blink: Paul Quote Link to comment
Guest DatsuNoob Posted June 7, 2010 Report Share Posted June 7, 2010 Moved it from the Parkland garage, to my house! Finally can roll outta bed and go work instead of driving to another location 20 minutes away. STOKED! Quote Link to comment
mr68gts Posted June 8, 2010 Report Share Posted June 8, 2010 Got the base coat and clear coat in the window frames/door jams and inside the cab today! Not bad for shooting it in my back yard hehe. Tomorrow the headliner goes in! :w00t: Then I cover it up and let the clear settle for a week before I install the glass. Paul Quote Link to comment
elmerfudpucker Posted June 8, 2010 Report Share Posted June 8, 2010 Cut in the door speakers, starting on the trimwork. canby,canby,canby,canby..... :blink: Quote Link to comment
moparvwfreak Posted June 8, 2010 Report Share Posted June 8, 2010 looked at it and thought about driving it.... then i remembered i close... not a wise idea... cant wait to get my sentra. Quote Link to comment
Guest DatsuNoob Posted June 8, 2010 Report Share Posted June 8, 2010 Cut in the door speakers, starting on the trimwork. canby,canby,canby,canby..... :blink: Your ass BETTER be at Canby, or it's knuckle-sandwiches for you :angry: :lol: Quote Link to comment
elmerfudpucker Posted June 9, 2010 Report Share Posted June 9, 2010 Your ass BETTER be at Canby, or it's knuckle-sandwiches for you :angry: :lol: hehehe Sound system is running, despite an amp smoking, still need to finish the doors tho. And I am trying but I dont know out of what orifice that I can extrude the funds from. Konan's vet bill took all of my stash, granted anything comes a distant second to my GWLS. Nobody has had any electrical or PC work for me WTF... Quote Link to comment
Grey_Matter Posted June 9, 2010 Report Share Posted June 9, 2010 todat i looked at my bulletside as i hopped into my 2010 Fronty Quote Link to comment
nismo dr Posted June 10, 2010 Report Share Posted June 10, 2010 I adjusted my brakes. feels so much better Quote Link to comment
fastdadd Posted June 10, 2010 Report Share Posted June 10, 2010 put a sway bar on the front...feels much better Quote Link to comment
Drag720 Posted June 10, 2010 Report Share Posted June 10, 2010 went junkyard hopping and got all kinds of stuff, even pulled a set of hood hinges off of a buick so i can suicide my hood Quote Link to comment
elmerfudpucker Posted June 10, 2010 Report Share Posted June 10, 2010 more stereo and lighting in the 720 :D Quote Link to comment
mr68gts Posted June 10, 2010 Report Share Posted June 10, 2010 Got the new headliner in place! WOOT! Pain in the arse that was boy. Then I proceed to break the windshield putting it in. :angry: Quote Link to comment
sycloned916 Posted June 12, 2010 Report Share Posted June 12, 2010 Got all my suspension for my 520 re-build. QA1 front and rear coilovers and the triangulated 4-link for it. Trucks going to be 10 times better, will post it when i pick-up the other cab and frame. And the 520 is getting the Blacktop. Quote Link to comment
motavated Posted June 12, 2010 Report Share Posted June 12, 2010 Good luck syclone! Took off my camper to see if a 89 chevy s10 tonneu cover would fit. NOPE! 2 inches short but the width was good... Made me sad.... :( Quote Link to comment
Joe B Posted June 12, 2010 Report Share Posted June 12, 2010 Lower ball joints both sides and shocks for front. Pulled of tie rod, idler arm and center link assembly. Tomorrow everything that came off goes on new as well as a new(used) carb from last weekends junkyard tour. Thanks to RockAuto I got all the tie rods, center link and idler arm shipped to my door for less than $100. I love to save a buck on my $500 truck. Almost ready to load the quad and run up to Gorman OHV area. Quote Link to comment
Guest DatsuNoob Posted July 26, 2010 Report Share Posted July 26, 2010 Sprayed on my UPOL raptor today. Bed looks great! Shit doesnt come off your skin too well though :angry: Take special care to avoid contact with certain areas when urinating. I wasnt so lucky. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.