Mesh-71 Posted August 9, 2009 Author Report Share Posted August 9, 2009 I drove it to Blue Lake! Quote Link to comment
vegas510 Posted August 9, 2009 Report Share Posted August 9, 2009 SORRY I'M A NOOBIE!!! FAILED!! but FIXED!!!!!! Quote Link to comment
ichorid Posted August 10, 2009 Report Share Posted August 10, 2009 today I put on my new DGR front sway bar. 100% difference in handling now. Can't believe I drove her for so long without a front saw bar. We got Energy Suspension bushings and clips for some added security. pulled out the integra seats and put in the 350z seats. Thanks 71dimer!!! put hood pins on the CF good so I didnt stare at it waiting for it to fly at my face while driving. pics there Quote Link to comment
71DIMER Posted August 11, 2009 Report Share Posted August 11, 2009 Hey the seats look great installed! Good job...I still have the box you sent me sealed up :P Quote Link to comment
ichorid Posted August 13, 2009 Report Share Posted August 13, 2009 I had JUST opened the box you sent me the day I put those in the car. My wife kept asking "When are you going to get that out of our living room?" seriously very happy with the seats, supportive like race seats, comfy like luxury seats. Quote Link to comment
Bwana Posted August 13, 2009 Report Share Posted August 13, 2009 Z33 seats are great. I had a set in one of my s13's. They look good in your dime! Quote Link to comment
SRSANDS Posted August 15, 2009 Report Share Posted August 15, 2009 Well I actually didnt do all this today but I got these things done this month so far OLd carb and old mani and bolted on the cannon mani and weber 40. Runs good but needs fine tunning and smaller choke tubes I think..surges at higher RPMs Painted all my still plates dark graphite gunmetal....offsets with the silver and I like it Ground down my control arms a hair and in the process of rewelding them up to accomodate the 8 inch JDM Enkies wrapped in 205/40/16.... Broke my fuse box cover!!! So I made a cheezy one from a lil picture frame and some crap laying around...it clicks right down nice and tight but kinda gay :) Quote Link to comment
bonvo Posted August 15, 2009 Report Share Posted August 15, 2009 started polishing the new valve cover Quote Link to comment
nullbound Posted August 15, 2009 Report Share Posted August 15, 2009 I broke my window crank handle. Does that count? Quote Link to comment
bonvo Posted August 15, 2009 Report Share Posted August 15, 2009 I broke my window crank handle. Does that count? i may have a spare if you need it :D Quote Link to comment
freekwonder Posted August 15, 2009 Report Share Posted August 15, 2009 Put on the rear sway bar. Hopefully I put it on right, instructions sucked and lost the diagrams. Quote Link to comment
dimedude Posted August 16, 2009 Report Share Posted August 16, 2009 took off the front fenders,cut out one of the many spots of body rot and replaced with newer sheet metal lots of cutting and welding not finished but looking better Quote Link to comment
Icehouse Posted August 16, 2009 Report Share Posted August 16, 2009 Cut the front off my car with some help from my buddy Quote Link to comment
bonvo Posted August 16, 2009 Report Share Posted August 16, 2009 finished installing the weber, the non smog intake, the header, the matchbox dizzy, and the thermostat housing. mocked up the radiator and fired her again. sounds mean with an open header. :D Quote Link to comment
inline4 Posted August 18, 2009 Report Share Posted August 18, 2009 I did this.... also, would the dash frame be a very big nono if I was looking for a ground? Quote Link to comment
goatee Posted August 18, 2009 Report Share Posted August 18, 2009 dimedude you even found new metal already painted orange! Nice! Worked with my carb a bit. It's seems to be putting out too much gas. Opened up the valve cover again only to find my guage does 20 28 and 30 but no 25. :mad: Quote Link to comment
freekwonder Posted August 19, 2009 Report Share Posted August 19, 2009 Nothing big, mounted the ECU, but at least I got to spend time with her. Quote Link to comment
philcas1987 Posted August 22, 2009 Report Share Posted August 22, 2009 i have another car so i can post again:fu: i stripped the engine bay of shit i dont need for the ka and to give it the phil detail. dislexicdime also worked on it. he took most of the dash apart. i dont know what to do next. it needs alot of detail work;) Quote Link to comment
woodside4032 Posted August 22, 2009 Report Share Posted August 22, 2009 I changed my ujoints. Finally no more clunk noise :fu: Quote Link to comment
Mesh-71 Posted August 23, 2009 Author Report Share Posted August 23, 2009 I re-torqued the head, cleaned up a few little things, made a list of things to grab from the junkyard, spent some time cleaning up the work space as well. Quote Link to comment
a.d._510_n_ok Posted August 23, 2009 Report Share Posted August 23, 2009 Cut the front off my car with some help from my buddy sup with that '61 Impala SS in in the left background? looks sweet! Quote Link to comment
bonvo Posted August 23, 2009 Report Share Posted August 23, 2009 god where to start got the car back from the exhaust shop tuned the carb and timing fixed the brakes finished the lights hooked up the speedo cable finished mounting the wheels with good lug nuts and theres more im forgetting :P Quote Link to comment
Logical1 Posted August 26, 2009 Report Share Posted August 26, 2009 Well I replaced/rebuilt all my exhaust hangers today and it cut down on the vibratto ALOT! and its not really to the 510 but its for them. In preperation of replacing my cutch, I built 2 11" ramp jacks today out of some spare steel truss I had and $4 worth of rattle can black. They arnt the most gorgeous in the world but they worked great and I'm pretty sure you could drive a panzer up them! Quote Link to comment
inline4 Posted August 26, 2009 Report Share Posted August 26, 2009 Not today, but at least its starting to look better... I went from this to this I'm gonna put the wires back on the stock connector and then I bought some relay sockets. I shortened the wiring harness myself... and it still seems to work :P Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.