Zonargx Posted December 2, 2020 Author Report Share Posted December 2, 2020 I got some 6 1/2 mids for a good price that are low profile I might consider putting them on the door panels or on the side of the foot rest. If I can’t fit them nicely then I’ll get my father to help me make a center box right above the shifter I have some extra teeters that are like what you said @datzenmike so if this mids sound good i might remove the bigger teeter put the small ones on the lower part of the dash pointing up on a 45 angle and install my amp and sub under the seat 1 Quote Link to comment
mainer311 Posted December 2, 2020 Report Share Posted December 2, 2020 Tell you what, covid has been disrupting the supply of nearly everything. I wouldn’t be surprised if there was a shortage of spark plugs or some other BS. I went to get a piece of tempered glass ordered yesterday, and they told me it was going to take 6 weeks! 1 Quote Link to comment
datzenmike Posted December 2, 2020 Report Share Posted December 2, 2020 A custom size piece? because tempered can't be cut. It has to be cut to size first then tempered. 1 Quote Link to comment
mainer311 Posted December 2, 2020 Report Share Posted December 2, 2020 Yes, custom. They said prior to Covid, turn around time was 2 weeks or less. 1 Quote Link to comment
Zonargx Posted December 6, 2020 Author Report Share Posted December 6, 2020 So Napa gave me a pack of coils b6es coils and was missing one so I took the. Long story short they ended up giving me bp6es due to reason of not having them in stock and also cuz it supersedes the no resistor coils anyways I have all 4 bp6es coils and I need to know what’s the best gap I should run again stock l16 with the Webber 32/36 1 Quote Link to comment
datzenmike Posted December 6, 2020 Report Share Posted December 6, 2020 Spark plugs. B6ES is the early L16 plug. BP6ES is just a projected tip BPR6ES is the later resistance spark plug. Set to 0.032" 1 1 Quote Link to comment
Zonargx Posted December 6, 2020 Author Report Share Posted December 6, 2020 Thanks and sorry they gave me the BPR6ES forgot they were resistance not that it’s any difference but I’ll be installing them tomorrow 1 Quote Link to comment
Zonargx Posted December 29, 2020 Author Report Share Posted December 29, 2020 Have you guys bought any of your seals from dapsupply.net I believe there located in Anaheim California. I’m getting the quarter window seals 1 Quote Link to comment
Toneloc521 Posted January 22, 2021 Report Share Posted January 22, 2021 Can we shoot flames out of the exhaust with an L16? 1 Quote Link to comment
datzenmike Posted January 22, 2021 Report Share Posted January 22, 2021 It can..... but that's not normal. 2 Quote Link to comment
Zonargx Posted March 24, 2021 Author Report Share Posted March 24, 2021 (edited) So update on my truck got all my suspension parts just waiting on motor mounts and @mklotz70 bushings to hopefully have them install in a few weeks along with some led headlights and this bad boys Edited March 24, 2021 by Zonargx Quote Link to comment
Zonargx Posted March 24, 2021 Author Report Share Posted March 24, 2021 I was thinking 205/50/15 tires on them they are 15x8 don’t know the brand to be honest got them for cheap. Quote Link to comment
Zonargx Posted March 24, 2021 Author Report Share Posted March 24, 2021 They seem like Boyd’s or perhaps American alloy any clues? Quote Link to comment
pidge Posted March 24, 2021 Report Share Posted March 24, 2021 “Prime” name brand perhaps. Don’t know if they are around anymore, but they use to have something similar back in the day. -Pidge 1 Quote Link to comment
mainer311 Posted March 24, 2021 Report Share Posted March 24, 2021 Those are Eagle Alloys 028's. Quote Link to comment
420n620 Posted March 24, 2021 Report Share Posted March 24, 2021 On 12/29/2020 at 11:43 AM, Zonargx said: Have you guys bought any of your seals from dapsupply.net I believe there located in Anaheim California. I’m getting the quarter window seals Did you purchase a set yet ? Wondering how they fit around the corners once installed. https://www.dapsupply.net/products/please-call-datsun-620-king-cab-rear-oval-glass-seal/ Quote Link to comment
banzai510(hainz) Posted March 24, 2021 Report Share Posted March 24, 2021 I would run the stock rims with samll white wall tire. Looks better on a 521 2 Quote Link to comment
mklotz70 Posted March 24, 2021 Report Share Posted March 24, 2021 You're bushings are going out to the mailbox in about 2 minutes. :) 1 1 Quote Link to comment
mrbigtanker Posted March 24, 2021 Report Share Posted March 24, 2021 Its your truck and in my humble opinion those wheels are not going to do your truck any justice. The stock look is way nicer. Hell, have someone widen your stock wheels and that would be very cool also. 1 Quote Link to comment
Zonargx Posted March 24, 2021 Author Report Share Posted March 24, 2021 3 hours ago, 420n620 said: Did you purchase a set yet ? Wondering how they fit around the corners once installed. https://www.dapsupply.net/products/please-call-datsun-620-king-cab-rear-oval-glass-seal/ I bought the vent window one for the 521 though and they fit good didn’t come squashed up like some other seals do Quote Link to comment
banzai510(hainz) Posted March 24, 2021 Report Share Posted March 24, 2021 1 hour ago, mrbigtanker said: in my humble opinion those wheels are not going to do your truck any justice Couldnt have said it any better. Quote Link to comment
Zonargx Posted March 24, 2021 Author Report Share Posted March 24, 2021 1 hour ago, mrbigtanker said: Its your truck and in my humble opinion those wheels are not going to do your truck any justice. The stock look is way nicer. Hell, have someone widen your stock wheels and that would be very cool also. Unless I find some 15 inch steelies that look good I would. I was even thinking about getting them widen if I did find them but so far I haven’t found some nice ones. I got these 028 (thanks @mainer311)for $150 so I’m gonna rock this for a bit 1 Quote Link to comment
Zonargx Posted March 24, 2021 Author Report Share Posted March 24, 2021 I found some really nice stock wheels on offer up but they are 14s and due to my disk brake upgrade I can’t run the 14s. Those wheels were so nice even had the center caps for $200 Quote Link to comment
Zonargx Posted March 24, 2021 Author Report Share Posted March 24, 2021 Thanks @mklotz70 1 Quote Link to comment
datzenmike Posted March 24, 2021 Report Share Posted March 24, 2021 1 hour ago, mrbigtanker said: Its your truck and in my humble opinion those wheels are not going to do your truck any justice. The stock look is way nicer. Hell, have someone widen your stock wheels and that would be very cool also. Have to agree. Stock rims or maybe Chevy 6 bolt steel rims in 15" are like a pearl necklace on a woman. Casual, elegant and fit all occasions. Can't go wrong with the stock look. Same with 620. Mike your mailbox is full. I tried to increase your box size but failed. 2 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.