4perrev Posted June 14, 2019 Report Share Posted June 14, 2019 (edited) Well, I was so motivated after going to Oregon and seeing all the cool kids cars, I just had to have one. Actually, my wife really likes the goons. So here she is. Trailer ride home: She has a running L18, Weber 32/36 carb with a 5-speed. Not sure which one yet as I haven't had time to get under there. Konig wheels (I believe) and lowered on rear blocks with potentially cut springs up front. They are the stock 510 struts, but will be replaced as I go. The interior is crazy nice. The headliner looks brand new all the way down. And the box O' parts has all brand new steering ball joints, new wiper motor and a header. Her she is in her new home: Might be a minute before I can get into working on her cause I still gotta finish the 2-door. Super nice for a great price too!! Edited June 14, 2019 by 4perrev 11 Quote Link to comment
datzenmike Posted June 14, 2019 Report Share Posted June 14, 2019 Not bad at all, like the rims. The dogleg has reverse above first. Those seats (as most all Datsun seats) are killer uncomfortable. If you're not a purist get something from a wrecking yard that works for you. Upholstery and comfort have come a long way in the past 50 years. If you end up putting the header on be sure not to throw the exhaust manifold away. 1 Quote Link to comment
Josh K. Posted June 14, 2019 Report Share Posted June 14, 2019 This was forsale in Port Townsend? That car was a good deal! Quote Link to comment
Draker Posted June 14, 2019 Report Share Posted June 14, 2019 That thing does look pretty nice! Quote Link to comment
4perrev Posted June 14, 2019 Author Report Share Posted June 14, 2019 The seats are nice but I haven’t ridden in them yet so I’m not sure how bad they are. I’ll take your word for it though. Not to worry Mike, I never throw anything away! All these parr’s are too hard to find and I want to keep these gals alive! she was in Port Townsend. Second car I picked up there so far. 1 Quote Link to comment
datzenmike Posted June 14, 2019 Report Share Posted June 14, 2019 I had a set and there was a bar across the bottom that if you sat back and hit a bump your tail bone would come down on. You can always sell to someone that wants stock seats. Quote Link to comment
yenpit Posted June 15, 2019 Report Share Posted June 15, 2019 The L18's are in demand by the SCCA & some vintage race guys to conform to displacement rules, so if you sell, aim for them! Most street car guys are going L20B or some variation of a later NIssan twin cam swap! Nice project! TJ Quote Link to comment
4perrev Posted June 15, 2019 Author Report Share Posted June 15, 2019 Yeah not sure where I want to go with it yet. May leave it stock. But I’m sure my wife is going to want to change it for a comfortable seats Quote Link to comment
4perrev Posted June 15, 2019 Author Report Share Posted June 15, 2019 (edited) I have an L 20 already, but I’m just not sure I'm going to use it this one. I might keep the 18 just cause it’s interesting. Edited June 15, 2019 by 4perrev Quote Link to comment
banzai510(hainz) Posted June 17, 2019 Report Share Posted June 17, 2019 leave the L motor. Not many wagons left anymore. fix body paint call it good 1 Quote Link to comment
4perrev Posted June 18, 2019 Author Report Share Posted June 18, 2019 Yeah I'm definitely going L-motor and keeping this one a single color. Not going crazy like the two door! Quote Link to comment
4perrev Posted June 22, 2019 Author Report Share Posted June 22, 2019 Thank you. I think she will play nice in the sandbox once I get her out in public!!!!!! 2 Quote Link to comment
mrbigtanker Posted June 24, 2019 Report Share Posted June 24, 2019 Nice man. Stock seats can be repadded for better comfort but need help. I weigh 325 so could be that. Can’t wait to watch the progress. 1 Quote Link to comment
datzenmike Posted June 24, 2019 Report Share Posted June 24, 2019 Padding won't help the ones I had it was right at the tail bone. I guess made forlittle Asian Asses 2 Quote Link to comment
4perrev Posted June 24, 2019 Author Report Share Posted June 24, 2019 4 hours ago, mrbigtanker said: Nice man. Stock seats can be repadded for better comfort but need help. I weigh 325 so could be that. Can’t wait to watch the progress. They look nice, but are, yes, uncomfortable as heck. Going to look at as many wagon pics as possible to see where I may go with her. My wife will have a big influence in the seats as she will have to ride with them also. I'm about 140lbs behind ya, so padding for me is not too bad an issue! 1 Quote Link to comment
yenpit Posted June 25, 2019 Report Share Posted June 25, 2019 I typically use the 87-up Acura Integra & 88-98 Honda Prelude. Personally I don't like the Accord or Civic, except for the kinda RARE 88-91 Civic Si's......those are nice! I think many of the Subaru seats will fit, but never had any. I always use the slide rails that come on the seats, not the 510 rails. Most will require some trimming & bending of the rail ends/feet & sometimes a spacer or three on one or two of the rail ends/feet. Once trimmed, you really should weld in some small gussets to re-strengthen the rail ends/feet. The fronts are usually even with each other cuz they mount on a raised sub-floor/sub-frame (just like the 510!), the rears are often staggered cuz they mount on the floor pan. I usually don't use the original 510 stamped steel seat risers, cuz the later seat slide rails look pretty stout to me! Hope that helps! TJ 1 Quote Link to comment
rosso Posted June 25, 2019 Report Share Posted June 25, 2019 (edited) Here's a link to an older dime quarterly article about installing BMW seats into the 510. Looks easy. And they look good/appropriate for the 510. http://dimequarterly.blogspot.com/2012/10/e30-bmw-seat-installation.html Good luck and post pics update when you do it. Edited June 25, 2019 by rosso 1 Quote Link to comment
4perrev Posted June 26, 2019 Author Report Share Posted June 26, 2019 Thanks for the ideas fellas. I do like BMW seats. I’ll let you know where I end up down the road with lots o pics! Quote Link to comment
Duncan Posted July 25, 2019 Report Share Posted July 25, 2019 (edited) I ended up using later model 3 Series BMW seats in my wagon. They were a lot of work getting them in there, but they look period correct and they are very comfortable. That wagon looks like a nice straight builder. Nice score! Edited July 25, 2019 by Duncan 2 Quote Link to comment
4perrev Posted January 20, 2020 Author Report Share Posted January 20, 2020 My son bought this board for me awhile back and forgot to post it. Inspiration to build for sure!! 3 Quote Link to comment
LS_Wagon Posted January 20, 2020 Report Share Posted January 20, 2020 1 hour ago, 4perrev said: My son bought this board for me awhile back and forgot to post it. Inspiration to build for sure!! That would look awesome on my garage! Any idea where he got it? Quote Link to comment
4perrev Posted January 21, 2020 Author Report Share Posted January 21, 2020 He bought it at the car show in Seattle or Renton sometime back. These guys have decks...although, not sure which ones. http://www.s2carbonworks.com/jdmegoskdeev.html https://carfanatixshop.com/products/jdm-legends-skateboard-wallart https://iloveracing.com/ Other than that, not sure where else, sorry. 1 Quote Link to comment
4perrev Posted January 24, 2020 Author Report Share Posted January 24, 2020 Ok, now that the Mazda is done.....Time for the Goons turn. Doesn't look too bad. Needs the usual cleaning and polish treatment. Only time will tell if there is anything under the coating. Nice custom driveshaft with the sticker still attached! Complete with bumpstops! Plan is to take the engine and trans out first. Will go through all of it and make it fresh. The wiring harness has been gone through by someone else and will take some good work to put it back to normal. There are wires everywhere. Let's start the redo.....cue that's 70's music for motivation!! 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.