angliagt Posted March 23, 2020 Report Share Posted March 23, 2020 8 hours ago, VFR800 said: .....and the moral of the story is "Don't cry over spilt beer"? 1 3 Quote Link to comment
Jesse C. Posted March 24, 2020 Report Share Posted March 24, 2020 8 hours ago, VFR800 said: Saw a lady drop a bag off the back of her car at Target that was full of Booze. Wine and Vodka. The kid from Target helping her load her car was freaking out! 1 1 Quote Link to comment
bilzbobaggins Posted March 30, 2020 Report Share Posted March 30, 2020 I know why your xterra sounds like a tractor sir. Along with the hole, it was cracked all over. Found quite a few folks claiming the first gen had bad castings. 3 Quote Link to comment
hobospyder Posted April 2, 2020 Report Share Posted April 2, 2020 Haha, full on torture chamber. Should be in the guest room or buy a shed to hold it 2 1 Quote Link to comment
datzenmike Posted April 2, 2020 Report Share Posted April 2, 2020 Cellar, always get a house with a cellar. 3 1 Quote Link to comment
Soundline Posted April 2, 2020 Report Share Posted April 2, 2020 Can't imagine how he got a divorce... must've forgotten the safe word. 1 1 Quote Link to comment
Jesse C. Posted April 4, 2020 Report Share Posted April 4, 2020 On 4/2/2020 at 4:09 AM, VFR800 said: 3 Quote Link to comment
thisismatt Posted April 4, 2020 Report Share Posted April 4, 2020 1 hour ago, VFR800 said: That tile layout looks terrible! 2 Quote Link to comment
bilzbobaggins Posted April 4, 2020 Report Share Posted April 4, 2020 (edited) Not sure who to have beef with. On the right is one of my old sway bar link bolts. Top broke off when I went to loosen it, and the sleeve was rusted in place in the middle. Cut the bottom and applied a few heat treatments to get the sleeve off. And on the left, the bolt that came in my Centric 521 kit from rock. Juuuuussstttt a hair to short, like 1 3/4 to 2 inches short. I cant find another thread with someone saying they got the wrong kit. So, either rock sent the wrong kit, Centric plowed me or I have some bastardized setup already in place. Edit: I was sort of right. The truck had a 620 kit in it. So, the dreaded PO screwed me. Edited April 5, 2020 by bilzbobaggins 3 Quote Link to comment
BrothersGarage Posted April 5, 2020 Report Share Posted April 5, 2020 There is enough of you crazy bastards on this forum that may find this interesting - how to build small refrigeration units (air conditioning small enough for cosplay should be able to be stuffed into a glove-box or something!) 2 Quote Link to comment
thisismatt Posted April 5, 2020 Report Share Posted April 5, 2020 What a deal https://santabarbara.craigslist.org/pts/d/carpinteria-brake-rotors/7103976949.html 1 1 1 Quote Link to comment
datzenmike Posted April 5, 2020 Report Share Posted April 5, 2020 23 hours ago, bilzbobaggins said: Not sure who to have beef with. On the right is one of my old sway bar link bolts. Top broke off when I went to loosen it, and the sleeve was rusted in place in the middle. Cut the bottom and applied a few heat treatments to get the sleeve off. And on the left, the bolt that came in my Centric 521 kit from rock. Juuuuussstttt a hair to short, like 1 3/4 to 2 inches short. I cant find another thread with someone saying they got the wrong kit. So, either rock sent the wrong kit, Centric plowed me or I have some bastardized setup already in place. Edit: I was sort of right. The truck had a 620 kit in it. So, the dreaded PO screwed me. The length doesn't matter that much as long as it clears. Obviously the long ones worked. 1 Quote Link to comment
bilzbobaggins Posted April 6, 2020 Report Share Posted April 6, 2020 3 hours ago, datzenmike said: The length doesn't matter that much as long as it clears. Obviously the long ones worked. I mostly post my thoughts here in daily randomness. I posted this here before I did research and started the thread in the 521 section. Yes they cleared. Were they working as well as running the short ones? Dunno, and prolly wont know as it will be just subjective guessing when I install the short ones tomorrow. Biggest thing I am curious about is why Nissan changed them. Assuming all measurements are the same on the 521 and 620 with relation to the swaybar and lower control arm, then there must be a benefit. 1 Quote Link to comment
VFR800 Posted April 6, 2020 Report Share Posted April 6, 2020 Brother bought a 1200 ute - 6 Quote Link to comment
Dav Posted April 10, 2020 Report Share Posted April 10, 2020 (edited) Edited April 10, 2020 by Dav 2 Quote Link to comment
angliagt Posted April 10, 2020 Report Share Posted April 10, 2020 I think that guy lives not to far from me. Or used to. 2 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.