edekalil Posted April 17, 2021 Report Share Posted April 17, 2021 Used my favorite brake bleeding bottle. 1 Quote Link to comment
LS_Wagon Posted April 20, 2021 Report Share Posted April 20, 2021 Test fitted a lens I made for my Wagon. Crossing fingers I get the equipment dialed in to improve the final result. 2 Quote Link to comment
Jesse C. Posted April 23, 2021 Report Share Posted April 23, 2021 (edited) One of my little projects on my car. I was cleaning out an old container that had some misc. old parts and had water at the bottom, as I was chucking out the container, I noticed this old Gas Cap plate sitting at the rusty bottom. So I pulled it out and had the idea to make it my Kill Switch mount. Car has a fuel cell with no hose filler, so this spot was open. Sorry, pics went out of order when I hit the submit button. Edited April 23, 2021 by Jesse C. 5 Quote Link to comment
edekalil Posted April 28, 2021 Report Share Posted April 28, 2021 (edited) Cool, I cranked and drove the Two Sedans and Goon around town Sunday and Monday. The Goon is running a little strange but I believe it's the carb. It probably needs a good run down the interstate and open her up. Edited April 28, 2021 by edekalil Quote Link to comment
AC5 Posted May 9, 2021 Report Share Posted May 9, 2021 On 4/20/2021 at 2:31 AM, LS_Wagon said: Test fitted a lens I made for my Wagon. Crossing fingers I get the equipment dialed in to improve the final result. Interesting! What kind of equipment did you use for this? Quote Link to comment
edekalil Posted May 9, 2021 Report Share Posted May 9, 2021 Cranked up and drove the two sedans and Goon today, also started to clean up the sand left by the masonry fella around the rotisserie. Now to move the rest of stuff from it as well. 1 Quote Link to comment
LS_Wagon Posted May 11, 2021 Report Share Posted May 11, 2021 On 5/9/2021 at 1:28 PM, AC5 said: Interesting! What kind of equipment did you use for this? I needed to get my pressure chamber set properly to compress the air bubbles down to a size no longer noticeable. 2 Quote Link to comment
Tedman Posted May 16, 2021 Report Share Posted May 16, 2021 Got my front carb re-installed and synch'd after replacing the front throttle shaft seal on #1 butterfly. Seems to have fixed the air leak that was causing my high idle when engine warm problem. Now she idles at ~850 rpm like she's supposed to. Next up is to clean, oil and re-install the air filter, but just had to snap a pic of those velocity stacks since I don't get to see them very often! 3 Quote Link to comment
Draker Posted May 23, 2021 Report Share Posted May 23, 2021 Sold one of mine today. The one I had listed in the classifieds. 71 4 door. Always hard to see them go, but better than sitting around and going to waste. This one is headed to Arizona. Quote Link to comment
edekalil Posted May 31, 2021 Report Share Posted May 31, 2021 (edited) Put some Sea Foam in her and drove the shit out of her to go see a goon in the country. Trying to get her carb jets cleared out now she's running great except for the stumbling on take off. http:// http:// Also this jem on the way back and she is in great shape, I'm going back and try to catch them about it future. http:// Edited June 4, 2021 by edekalil 1 Quote Link to comment
edekalil Posted June 20, 2021 Report Share Posted June 20, 2021 Got the 72 Sedan gas qauge working, poor connection at the sensor. Quote Link to comment
rosso Posted June 22, 2021 Report Share Posted June 22, 2021 Small things can make a difference - you need to be able to see where you are going. 🙃 New windshield and rebuilt wiper linkage. 1 Quote Link to comment
edekalil Posted June 28, 2021 Report Share Posted June 28, 2021 (edited) Crazy but a break through. I wanted to do this anyway, put the elec dizzy ( matchbox) into the Goon from the sedan and the points in the sedan. As well swapped the plugs caused the gap. And Wala no popping or sputtering and off she ran really great. And the points did great in the Sedan. I am now very happy for a while at least. Next I need to come up with a set of parts to get the windshield wipers going that I took off that where in poor shape, y'all keep an eye out. Edited June 28, 2021 by edekalil Quote Link to comment
edekalil Posted July 4, 2021 Report Share Posted July 4, 2021 Enjoying running the hell out of the Goon today for a change. Quote Link to comment
Claudman Posted July 6, 2021 Report Share Posted July 6, 2021 Got my engine and transmission in place ready to install: 3 Quote Link to comment
Jesse C. Posted July 9, 2021 Report Share Posted July 9, 2021 On 7/6/2021 at 11:54 AM, Claudman said: Got my engine and transmission in place ready to install Please tell me about those fuel injection rails, please. Quote Link to comment
Claudman Posted July 9, 2021 Report Share Posted July 9, 2021 Pallnet Fuel Injector Rails (14mm, 6AN Fittings) Bought from z31online.com in 2018 They were $180 for the rails and mounting brackets with hardware. All the AN fittings are separate. Quote Link to comment
Claudman Posted July 9, 2021 Report Share Posted July 9, 2021 https://www.godzillaraceworks.com/z31fuel 2 Quote Link to comment
damon Posted July 10, 2021 Report Share Posted July 10, 2021 Installed my new door cards from Issaranawt TreeAusawa, he does amazing work! 3 Quote Link to comment
edekalil Posted July 11, 2021 Report Share Posted July 11, 2021 Fired up the Goon running great now and pretended I was MrBigTanker racing through the streets of McComb,Ms to go get coffee. Loving how she is running now. Next to go figure out the speedo in the 72 Sedan today. Quote Link to comment
edekalil Posted July 11, 2021 Report Share Posted July 11, 2021 On 6/21/2021 at 11:01 PM, rosso said: Small things can make a difference - you need to be able to see where you are going. 🙃 New windshield and rebuilt wiper linkage. This is one of the things I have to do to the Goon, I may need locate some parts to do it. Quote Link to comment
edekalil Posted July 11, 2021 Report Share Posted July 11, 2021 Pulled the 72 Sedan's speedo cable and it is broke, found another in the garage and it was broke. Found another that worked but it's way longer than the others? It has this bump thing in it. I know I bought several replacement cables from NAPA way way back. I guess now to do some searching. Quote Link to comment
edekalil Posted July 15, 2021 Report Share Posted July 15, 2021 Bought 2 aftermarket speedo cables, one for the 72 Sedan and a spare. Quote Link to comment
Claudman Posted July 15, 2021 Report Share Posted July 15, 2021 Got engine and transmission installed and started hooking thing up. Remote oil filter, cooler and thermostat. Heater Hoses to Vintage Air Mini System 4 Quote Link to comment
edekalil Posted July 18, 2021 Report Share Posted July 18, 2021 On 7/15/2021 at 8:32 AM, Claudman said: Got engine and transmission installed and started hooking thing up. Remote oil filter, cooler and thermostat. Heater Hoses to Vintage Air Mini System Nice Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.