Pumpkn210 Posted August 16, 2011 Author Report Share Posted August 16, 2011 After further inspection.... This truck was never finished! The wheels dont fit right(spokes sitting on drums) The brakes, clutch, and engine NEVER had fluid in them. And the rears are hooked up wrong(no bleeders) The drums are stuck on(too much extra metal) The interior of the cab and bed were never painted or finished(apparently) Gettin the wheels to fit right-ish and workin on the brakes today, carb and fuel tomarro, and then to the fun finishing things! Come on down and give a helping hand, or some parts! I gotta get it on the road by SUNDAY! ;) isn't the frame all done up to Like you wouldnt believe!! Quote Link to comment
Str8_69 Posted August 16, 2011 Report Share Posted August 16, 2011 'Grats man, that thing is so cool. Quote Link to comment
Wide14u Posted August 16, 2011 Report Share Posted August 16, 2011 i was thinking the frame was in nicer shape then my truck :D Quote Link to comment
elmerfudpucker Posted August 16, 2011 Report Share Posted August 16, 2011 first off, the tires are a bit on the large size... I also say the underside has a little chrome and pin-striping. Did I forget to mention the Wheels are Frakin Huge? Motor has never ran! I wonder if that intake and carb would work on my goon... And more pin striping I think Nuckin Futs would be a good name. what do the rest think? Quote Link to comment
DatWifey Posted August 16, 2011 Report Share Posted August 16, 2011 jesus, you better not drive that thing Dave, or it's all going to look like shit once it gets road grime on it. just leave it parked to keep it pretty ;) Quote Link to comment
henryhustler Posted August 16, 2011 Report Share Posted August 16, 2011 haha thats sick! nice score! Quote Link to comment
Wide14u Posted August 16, 2011 Report Share Posted August 16, 2011 that name works :D Quote Link to comment
bananahamuck Posted August 17, 2011 Report Share Posted August 17, 2011 This is were having broad form insurance is totally worth every cent . 3 Quote Link to comment
datsunaholic Posted August 17, 2011 Report Share Posted August 17, 2011 A little clue on how long it's sat... FRAM hasn't made a PH2850 since around 1991. Back in the 80s that's what my Mom bought for her 620. I still have one leftover from that long-ago era when the orange filters were considered the best. Quote Link to comment
Guest Rick-rat Posted August 17, 2011 Report Share Posted August 17, 2011 Pumpkin, If you need a master cylinder for the brakes I got 1 that that I used about 3 months before my brake swap, let me know if you need it Quote Link to comment
elmerfudpucker Posted August 17, 2011 Report Share Posted August 17, 2011 One back tire has a bigger contact patch than all 4 on most dattos! Well except maybe Che and me! :P Quote Link to comment
Eagle_Adam Posted August 17, 2011 Report Share Posted August 17, 2011 One back tire has a bigger contact patch than all 4 on most dattos! Well except maybe Che and me! :P nismo dr has some fatties too :D Quote Link to comment
Pumpkn210 Posted August 17, 2011 Author Report Share Posted August 17, 2011 Clutch Master from pip in and dont wanna bleed <_< Brakes are still full of air and I think the drivers rear is leakin :angry: Baught a STACK of spacers today and some washers for the whels :rolleyes: Although... I did get the headlight assemblies and high beams in, need reg beam bulbs :unsure: But altogether a productive half day, will check in with oics this evening! Will try to start it up in the mornin! ;) Quote Link to comment
]2eDeYe Posted August 17, 2011 Report Share Posted August 17, 2011 Way to go Daves. :thumbup: Can't wait to see this one running around :cool: Quote Link to comment
Pumpkn210 Posted August 18, 2011 Author Report Share Posted August 18, 2011 I had to clean out the clutch slave to get action, and it is now bleed and working! The fluid is comin out clean, but Im still a little worried about the brakes... Got the fuel lines hooked up and cleaned out, gonna try to start it in the mornin... Heres the oics of it in its current state... Still Need: Upper Rad Hose Outter Headlights Pass Turn Signal And I will be at the show on sunday! %85 sure... Quote Link to comment
Pumpkn210 Posted August 18, 2011 Author Report Share Posted August 18, 2011 Just primed the fuel system and am finishing off the night under it doin Chrome Repair! The Start 620 party STARTS at 8 in the AM folks!!!! Quote Link to comment
DatWifey Posted August 18, 2011 Report Share Posted August 18, 2011 well if it starts at 8, I guess I'll be unfashionably early :unsure: Quote Link to comment
Pumpkn210 Posted August 18, 2011 Author Report Share Posted August 18, 2011 Gota get in my alone time! And the Gas tank is clean ass! But the Fukin drain plug is all Messed up, hopefully just the plug.... Damn Shit, down to %70 <_< Quote Link to comment
Jester Posted August 18, 2011 Report Share Posted August 18, 2011 I think Nuckin Futs would be a good name. what do the rest think? Perfect! Quote Link to comment
Pumpkn210 Posted August 18, 2011 Author Report Share Posted August 18, 2011 It Runnnnnnnnnnssssssssssss.............. 1 Quote Link to comment
DatWifey Posted August 18, 2011 Report Share Posted August 18, 2011 :frantics: I just wish you could have made it happen about 30 minutes earlier Way to be dude. Way to get more shit done on this truck in the last four days than was done in past who-knows-how-many years. :thumbup: Quote Link to comment
motavated Posted August 18, 2011 Report Share Posted August 18, 2011 FUUUUUUU! It sounds so nice. That is what I am talking about right there! Quote Link to comment
bananahamuck Posted August 18, 2011 Report Share Posted August 18, 2011 Oh yeeeeaaahh. Quote Link to comment
skunk Posted August 18, 2011 Report Share Posted August 18, 2011 Bad ass man, such a cool truck. good to see you got it running. Quote Link to comment
Wide14u Posted August 18, 2011 Report Share Posted August 18, 2011 i like it sounds good but she is to pretty to run her all the time Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.