DISLEXICDIME Posted November 3, 2011 Author Report Share Posted November 3, 2011 Because I didn't hav any vacation till now. And now that the weather is shitty I realized I better get this thing in the garage. Plus I always build my cars in the winter. Quote Link to comment
bonvo Posted November 3, 2011 Report Share Posted November 3, 2011 Because I didn't hav any vacation till now. And now that the weather is shitty I realized I better get this thing in the garage. Plus I always build my cars in the winter. build um in winter drive um in summer Quote Link to comment
dennis Posted November 4, 2011 Report Share Posted November 4, 2011 just so every one who reads this knows you cant put your sr20det in from the bottom with the turbo on when you are using the mckenny top mount manfold Thats good to know, I never torqued down my bolts yet. they are just hand tight right now. Quote Link to comment
DISLEXICDIME Posted November 4, 2011 Author Report Share Posted November 4, 2011 trans mount modified and bolted up (trans mount was farther forward in my tan car weird) turbo back on down pipe on steering hooked back up tc rods in. wiring harness sitting on the passenger floor. inter cooler mounts in rear sump sway bar mounted. so many little tedious thing's :blink: I thought this going to be a straight forward swap switch my sr from my tan car to this car but it was not we had to change just about every thing. If it was not for Phil i would not have got this car done. so i would like to send a shout out to phil thanks phil for doing all the hard stuff ! ;) Quote Link to comment
bonvo Posted November 4, 2011 Report Share Posted November 4, 2011 where did this sr come from? im hoping its not the tan car with the bmw suspention Quote Link to comment
SSSEXXX Posted November 4, 2011 Report Share Posted November 4, 2011 Loving the progress my friend!! Keep it going strong!! Quote Link to comment
DISLEXICDIME Posted November 4, 2011 Author Report Share Posted November 4, 2011 where did this sr come from? im hoping its not the tan car with the bmw suspention yup Quote Link to comment
DISLEXICDIME Posted November 5, 2011 Author Report Share Posted November 5, 2011 Got it back on the ground cleaned the garage and decided to run the afco rad instead of the vw . Taking the rest of the day off Here is your pic for the day I would so drive it like this! Quote Link to comment
Laecaon Posted November 5, 2011 Report Share Posted November 5, 2011 I drove my wagon like that once. No windshield either for me though. It was awesome. Quote Link to comment
bonvo Posted November 5, 2011 Report Share Posted November 5, 2011 yup why? the tan car was bad ass what happened to it to prompt removing its heart Quote Link to comment
DISLEXICDIME Posted November 5, 2011 Author Report Share Posted November 5, 2011 sr requires more tire then that car can provide Quote Link to comment
bonvo Posted November 5, 2011 Report Share Posted November 5, 2011 oooooh lol ok then whats happening to it Quote Link to comment
Rustina 510 Posted November 5, 2011 Report Share Posted November 5, 2011 Looking super sweet dude Quote Link to comment
DISLEXICDIME Posted November 5, 2011 Author Report Share Posted November 5, 2011 i cant decide if i want to run my aluminum dash ron built for the tan car or run a stock dash Quote Link to comment
yello620 Posted November 5, 2011 Report Share Posted November 5, 2011 i cant decide if i want to run my aluminum dash ron built for the tan car or run a stock dash Stock :D Quote Link to comment
Z chopper Posted November 5, 2011 Report Share Posted November 5, 2011 Stock :D x2 Quote Link to comment
DISLEXICDIME Posted November 7, 2011 Author Report Share Posted November 7, 2011 not much to report atom mounted the ecu phil figured out the wiring . have to buy new t bolt clamps the old clamps dont fit with the new couplers. took the after noon off sunday and went 3 wheeler riding with shaun and phil . :cool: now we are all so sore we cant get off the couch. my pour rib's Quote Link to comment
DISLEXICDIME Posted November 8, 2011 Author Report Share Posted November 8, 2011 It's a live! I cant drive it yet though :(. I an waiting on my fan to get here and the dp needs to be shortened it hangs to low. I am worried that if I hit the dp on anything it will tear off ether my turbo or the manifold. it has been 11 months since I heard the roar of my engine and the sweet sound of my ssqv. I have so much crap left to do to the rest of the car. Quote Link to comment
slodat Posted November 8, 2011 Report Share Posted November 8, 2011 your valve cover is scratched. :D Quote Link to comment
DISLEXICDIME Posted November 9, 2011 Author Report Share Posted November 9, 2011 any one know where i can get 2" tight 90 silicone couplers for a good price? I don't like how the stander 90's fit. and tho old tight 90's i had on there are 69 bucks a pop Quote Link to comment
dennis Posted November 9, 2011 Report Share Posted November 9, 2011 are you running a lokar cable? Quote Link to comment
DISLEXICDIME Posted November 9, 2011 Author Report Share Posted November 9, 2011 yup. but i think ron maid the little aluminum filler pieces that go where the grommet go's Quote Link to comment
Rustina 510 Posted November 10, 2011 Report Share Posted November 10, 2011 Can you bring her to rr Saturday? Quote Link to comment
DISLEXICDIME Posted November 10, 2011 Author Report Share Posted November 10, 2011 Nope! Quote Link to comment
BRYAN503 Posted November 10, 2011 Report Share Posted November 10, 2011 <br />any one know where i can get 2" tight 90 silicone couplers for a good price? I don't like how the stander 90's fit. and tho old tight 90's i had on there are 69 bucks a pop<br /><br /><br /><br /> http://www.siliconeintakes.com/ Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.