]2eDeYe Posted February 21, 2009 Report Share Posted February 21, 2009 Nice. I did want to comment on Datsun's silly 8 bolts to hold a bed down on a 110hp truck. It's the 3/4-1 ton classification not the hp. ;) Quote Link to comment
Llittle_Llama Posted February 22, 2009 Author Report Share Posted February 22, 2009 Looks like the notches are going in tomorrow night :) bridge kit shortly after than, followed by the 4 link :D Quote Link to comment
kaoss Posted February 22, 2009 Report Share Posted February 22, 2009 nice. What kind of welder are you guys using? 110 or 220? If it is a 110, heat the metal up with a torch first,even if it is one of those cheep propane torches from Lowes. Quote Link to comment
Llittle_Llama Posted February 22, 2009 Author Report Share Posted February 22, 2009 not 100% sure, but there will be TONS of pics ;) Quote Link to comment
Llittle_Llama Posted February 23, 2009 Author Report Share Posted February 23, 2009 (edited) Edited February 23, 2009 by dwnshfter Quote Link to comment
Llittle_Llama Posted February 23, 2009 Author Report Share Posted February 23, 2009 Quote Link to comment
ariascarlos1990 Posted February 23, 2009 Report Share Posted February 23, 2009 its gettin there! now what are you gonna do with the bed? raise the floor of it? or cut it to fit? Quote Link to comment
Llittle_Llama Posted February 23, 2009 Author Report Share Posted February 23, 2009 its gettin there! now what are you gonna do with the bed? raise the floor of it? or cut it to fit? nothing as for now, but once we get closer to getting it finished I will sheet metal the top and make it flat. until then, I am just going to clean it up and paint it. Will know if I am shipping out to Az. in about 20 minutes, that will make or break the project for the time being. Quote Link to comment
kaoss Posted February 23, 2009 Report Share Posted February 23, 2009 Looking good! Hate to say that I am jealous! I can't get shit done mine :( Do yourself a favor and raise the floor, and keep all of the air ride stuff under it. Quote Link to comment
Llittle_Llama Posted February 26, 2009 Author Report Share Posted February 26, 2009 No Az for the moment :( sucks in that no cash flow for now, but good in that I can finish the truck now :D Quote Link to comment
SUN520 Posted February 26, 2009 Report Share Posted February 26, 2009 Nice work Dwn .... there is a woman in a hula skirt in your truck mate ...:blink: Quote Link to comment
Llittle_Llama Posted February 26, 2009 Author Report Share Posted February 26, 2009 Nice work Dwn .... there is a woman in a hula skirt in your truck mate ...:blink: has been in about 50 different cars I have owned ;) Quote Link to comment
WagDatto Posted February 26, 2009 Report Share Posted February 26, 2009 Uh oh! I see some FBI goodies!! You were graced by a box that Justin packed and shipped for you. Is that a license plate box I see? Where's that getting frenched? Quote Link to comment
Hyphy Posted February 26, 2009 Report Share Posted February 26, 2009 a few things I wanted to mention. Watch the back of ur cab floor on driveshaft. Heim joints arent designed for weight support.( pre-emptive warning) Have you thought of options on ur gas tank? fuel cell? basic relocation? Quote Link to comment
]2eDeYe Posted February 26, 2009 Report Share Posted February 26, 2009 Heim joints arent designed for weight support.( pre-emptive warning) ?? They were designed to carry loads (weight). That's why they have a load rating. Quote Link to comment
Llittle_Llama Posted February 26, 2009 Author Report Share Posted February 26, 2009 Is that a license plate box I see? Where's that getting frenched? going in the tailgate most likely. not 100% though. Quote Link to comment
620mike Posted February 27, 2009 Report Share Posted February 27, 2009 look good so far..... what size notches did you order are thoughs 10" i plan on baggin mine but with smaller notches Quote Link to comment
Llittle_Llama Posted February 27, 2009 Author Report Share Posted February 27, 2009 those are the 8's, it's the normal size suicide doors sells. Quote Link to comment
pucancakes Posted March 1, 2009 Report Share Posted March 1, 2009 (edited) can u measure the distance from the outside of the frame rail to the inside of bed? how big of a gap there is when u take the rear wheel off. i wanna if i can fit a 16x8 or 16x9 w a 0 offset wheel there Edited March 1, 2009 by pucancakes Quote Link to comment
BEEBANI Posted March 1, 2009 Report Share Posted March 1, 2009 16 x 8 will just barely fit, I had some on mine before I got the frontier wheels. They were pretty much a 0 offset wheel, it was tight. Quote Link to comment
Steroid Posted March 2, 2009 Report Share Posted March 2, 2009 Where are You? ! ? ! ? You know where in Arizona I am located, right? HURRY UP!! Your food is getting COLD!!!!! Quote Link to comment
lynchfourtwenty Posted March 3, 2009 Report Share Posted March 3, 2009 wow, about fucking time you got the ball rollin dwn Quote Link to comment
Llittle_Llama Posted March 3, 2009 Author Report Share Posted March 3, 2009 and got orders today for fort hood, lol. will be gone for about a week. everything should be here by the time I get back so it should all go in rather quickly ;) Quote Link to comment
pucancakes Posted March 5, 2009 Report Share Posted March 5, 2009 16 x 8 will just barely fit, I had some on mine before I got the frontier wheels. They were pretty much a 0 offset wheel, it was tight. yikes guess the rims i want to use wont work lol. 16x8 for the front and 16x9 for the rear Quote Link to comment
Llittle_Llama Posted March 24, 2009 Author Report Share Posted March 24, 2009 Few things that showed up while I was in Fort hood ;) just got home yesterday and cannot WAIT to get going again! hope to bag it this weekend :D Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.