datzenmike Posted January 18, 2023 Report Share Posted January 18, 2023 I had an L20B in my 521 and there was no hood clearance problems with the valve cover or the stock air filter housing at all using the L16 engine brackets and isolators. 1 Quote Link to comment
mrbigtanker Posted January 18, 2023 Report Share Posted January 18, 2023 3 hours ago, datzenmike said: I had an L20B in my 521 and there was no hood clearance problems with the valve cover or the stock air filter housing at all using the L16 engine brackets and isolators. Yes forgot about brackets as well. I had the 2.3 stroker and it cleared as well with the L16 brackets Quote Link to comment
mainer311 Posted January 19, 2023 Author Report Share Posted January 19, 2023 I'm using the L16 brackets. Everything was swapped over to the L20b. Quote Link to comment
datzenmike Posted January 19, 2023 Report Share Posted January 19, 2023 I've noticed that some rubber isolators are a lot thicker than others. Did the L20B have engine brackets on it? Even a slight chance they may have gotten mixed up? Well if absolutely sure and still a clearance problem there is another way to add clearance. 1 Quote Link to comment
Stoffregen Motorsports Posted January 19, 2023 Report Share Posted January 19, 2023 I've noticed that too. Didn't used to be that way, but starting a couple years ago, I've seen people posting pics of their engines with huge, thick motor mounts. Aftermarket? Or possibly a new source of OEM parts that aren't entirely accurate? Quote Link to comment
mainer311 Posted January 19, 2023 Author Report Share Posted January 19, 2023 521 mounts are NLA. You’re probably seeing 620 mounts, which are an abomination. Super thick and won’t work. My L20b shortblock didn’t include brackets, so it’s something else. Quote Link to comment
Tucson620 Posted January 19, 2023 Report Share Posted January 19, 2023 (edited) Went through this awhile back when my old engine mounts needed replacing. My 521 hood is pretty rough and supports are sagging. When I adapted a stock-appearing air cleaner to a Weber, it created hood clearance problems. Ended up buying all the "521" mounts offered on RockAuto - they are all thick ugly 620 mounts. See below. For the moment, am using a universal motor mount I found at Speedway Motors - intended for V8s I think. It's got a fatter 1/2" stud and is way to stiff for the 4 cylinder motor. Original 521 mount filthy left. 3 flavors of 620 mounts to right. The right/left indications for 620 mounts are a mess too - some say both sides, some say R/L only, etc. The middle one (no label) was another brand offered as for both sides - but basically same as EM-2533. Edited January 19, 2023 by Tucson620 3 1 Quote Link to comment
mainer311 Posted January 19, 2023 Author Report Share Posted January 19, 2023 Nice. Does the speedway mount drop right in? Quote Link to comment
Tucson620 Posted January 19, 2023 Report Share Posted January 19, 2023 (edited) 1 hour ago, mainer311 said: Nice. Does the speedway mount drop right in? Ratsun close. As I recall, the frame mount holes were close to on-center, I think drilled out a bit. And the stud is fatter, so drilled out my 521 engine mounts. As mentioned, the speedway mounts are very stiff and transmit more noise/vibration. But dropped the engine a little from the stock mount, and approx. 5/16" from the fat 620 mount . Specs are here: https://www.speedwaymotors.com/Universal-Square-Rubber-Engine-Motor-Mount-Pads,1181.html Edited January 19, 2023 by Tucson620 4 1 Quote Link to comment
mainer311 Posted January 20, 2023 Author Report Share Posted January 20, 2023 Awesome, thanks. I’m handy with a drill and tap. 😉 2 Quote Link to comment
mrbigtanker Posted January 20, 2023 Report Share Posted January 20, 2023 6 hours ago, Tucson620 said: Ratsun close. As I recall, the frame mount holes were close to on-center, I think drilled out a bit. And the stud is fatter, so drilled out my 521 engine mounts. As mentioned, the speedway mounts are very stiff and transmit more noise/vibration. But dropped the engine a little from the stock mount, and approx. 5/16" from the fat 620 mount . Specs are here: https://www.speedwaymotors.com/Universal-Square-Rubber-Engine-Motor-Mount-Pads,1181.html Wow man good to know as if it will work in the 510's as well that would be great as a taller L20 has problems as well. 1 Quote Link to comment
iceman510 Posted January 20, 2023 Report Share Posted January 20, 2023 OE 510 mounts are still available from Nissan. I bought some last year. Spriso buys them all the time for his SR20 conversions. The aftermarket are generally thicker as noted in some posts above. Also, you can buy banjo fittings with AN fitting ends. Would have saved some dinking around. Specially made for Webers too. 2 Quote Link to comment
KELMO Posted January 20, 2023 Report Share Posted January 20, 2023 Nissan part # 11220-A3500. I also bought a set around October of '21. They are installed but if you need measurements, let me know. 1 Quote Link to comment
mainer311 Posted January 21, 2023 Author Report Share Posted January 21, 2023 10 hours ago, iceman510 said: Also, you can buy banjo fittings with AN fitting ends. Would have saved some dinking around. Specially made for Webers too. In -4 size? I couldn’t find any. Quote Link to comment
Stoffregen Motorsports Posted January 21, 2023 Report Share Posted January 21, 2023 1 Quote Link to comment
Stoffregen Motorsports Posted January 21, 2023 Report Share Posted January 21, 2023 Pegasus Quote Link to comment
mainer311 Posted January 21, 2023 Author Report Share Posted January 21, 2023 (edited) 3 hours ago, Stoffregen Motorsports said: Pegasus Those won’t fit DCOE’s bub. They take special banjos with like a 16mm ID or something. Edited January 21, 2023 by mainer311 1 Quote Link to comment
Stoffregen Motorsports Posted January 22, 2023 Report Share Posted January 22, 2023 Don't call me Bub. 1 Quote Link to comment
iceman510 Posted January 23, 2023 Report Share Posted January 23, 2023 On 1/20/2023 at 7:06 PM, mainer311 said: In -4 size? I couldn’t find any. You could be right. I know I bought some -6 before. As you guys discussed above, if the banjo is larger that makes it more unusual. Quote Link to comment
mainer311 Posted January 23, 2023 Author Report Share Posted January 23, 2023 14 minutes ago, iceman510 said: You could be right. I know I bought some -6 before. As you guys discussed above, if the banjo is larger that makes it more unusual. The “issue” is that the only 1/8 bspt to AN adapter I could find for the mechanical fuel pump comes in -4. And to keep things neat, I wanted to maintain -4 the entire way, instead of having some bunk adapter somewhere in the middle. I’m pretty happy with it. Hopefully no more leaks when things get hot. Quote Link to comment
Stoffregen Motorsports Posted January 23, 2023 Report Share Posted January 23, 2023 -4 is on the small side for duals, but only because everyone else on the planet runs -6. It will work just fine. Quote Link to comment
mainer311 Posted January 28, 2023 Author Report Share Posted January 28, 2023 (edited) Welp, I’m picking up another roadster on Monday. A 68 2000. She’s a basket case. Edited January 28, 2023 by mainer311 3 Quote Link to comment
wayno Posted January 29, 2023 Report Share Posted January 29, 2023 I also bought a 1968 SRL311 and put the complete drivetrain in my 1967 SPL311, I sold the 68 with the R16 drivetrain and never missed it, the U20 engine is a major upgrade in my opinion, I am not floored going up freeway passes like I was with the R16/4spd, unfortunately I would rather drive my 521KC turbodiesel than the Roadster anymore, it is more comfortable and has more legroom than the early Roadsters. One of the drawbacks anymore is U20 engine parts, they cost a lot of money. Quote Link to comment
mainer311 Posted January 29, 2023 Author Report Share Posted January 29, 2023 You’re right. It can be a fortune to rebuild them. I want to keep the U20/5 speed/rear end for myself and sell the rest of the parts to break even. Quote Link to comment
mainer311 Posted January 31, 2023 Author Report Share Posted January 31, 2023 Well, she’s rough. Definitely not a resto, but good drivetrain, and the rear quarters are in pretty good shape. Even came with fiberglass race fenders. Can’t save them all, 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.