mrbigtanker Posted March 27, 2014 Report Share Posted March 27, 2014 So i got my grill from Corey at I must say damm nice work.Shit the box he sent it in was also nice,and the wrap job was just awesome.lol Thank you again Corey and not fast but fuckin fast shipping. 1 Quote Link to comment
danfiveten Posted March 27, 2014 Report Share Posted March 27, 2014 You are going to be so happy Tanker. 1 Quote Link to comment
CorAce Posted March 27, 2014 Author Report Share Posted March 27, 2014 So i got my grill from Corey at I must say damm nice work.Shit the box he sent it in was also nice,and the wrap job was just awesome.lol Thank you again Corey and not fast but fuckin fast shipping. That was fast, FedEx must have you on the "Nice" list. Be sure to post pics when you get it on the car. FYI, be careful not to over tighten any of the fasteners, the nylock nuts are fine with just snug they wont come undone. Although you may want to resnug them after a few heat cycles. Quote Link to comment
mrbigtanker Posted March 28, 2014 Report Share Posted March 28, 2014 That was fast, FedEx must have you on the "Nice" list. Be sure to post pics when you get it on the car. FYI, be careful not to over tighten any of the fasteners, the nylock nuts are fine with just snug they wont come undone. Although you may want to resnug them after a few heat cycles. Does it look like i even can overtighten it,lol Quote Link to comment
Rotary510 Posted March 28, 2014 Report Share Posted March 28, 2014 Is that a Hilti charger I see? So i got my grill from Corey at I must say damm nice work.Shit the box he sent it in was also nice,and the wrap job was just awesome.lol Thank you again Corey and not fast but fuckin fast shipping. 1 Quote Link to comment
mrbigtanker Posted March 28, 2014 Report Share Posted March 28, 2014 yes and 2 snap on chargers..nothing but the best. Quote Link to comment
RatVonDude Posted March 28, 2014 Report Share Posted March 28, 2014 Here's what i'm working on in my studio, of course nobody asks me shit Quote Link to comment
RatVonDude Posted March 28, 2014 Report Share Posted March 28, 2014 How can I make a sun visor outta clear blue plastic? Quote Link to comment
datsunfreak Posted March 30, 2014 Report Share Posted March 30, 2014 ere's what i'm working on in my studio, of course nobody asks me shit Well, for one thing, this is a car forum... :rofl: How can I make a sun visor outta clear blue plastic? And for second thing, what the actual fuck? :confused: This is CorAce's thread for making his grills and emblems for sale, not the "ask me how to make anything out of plastic" thread. So here's the answer. :rofl: Remove covering from sunvisor. It should have a small metal flap attached to the arm itself. Drill holes in that flap. Buy some clear blue lexan. Attach to flap with bolts. Job done. Or just get some like these that clip on to your existing visor. http://www.ebay.com/itm/Car-Sun-Visor-Clip-Sunshade-Goggles-Cover-Anti-Dazzle-Mirror-Clear-Green-/370833771233 Quote Link to comment
Z chopper Posted March 30, 2014 Report Share Posted March 30, 2014 Here's what i'm working on in my studio, of course nobody asks me shit if you can do work like this How can I make a sun visor outta clear blue plastic? this shouldn't be a problem Quote Link to comment
RatVonDude Posted March 30, 2014 Report Share Posted March 30, 2014 Ha Ha, why does everybody get so pissed on this site, I've made 15 piece molds outta plaster before, poured in wax, burned out wax, replaced with bronze but plastic is new too me. Can I buy a 1/4" strip of clear plastic and form it to make a single sun visor ( exterior ) for a 510? Many Thanks! Quote Link to comment
Z chopper Posted March 30, 2014 Report Share Posted March 30, 2014 Can I buy a 1/4" strip of clear plastic and form it to make a single sun visor ( exterior ) for a 510? Many Thanks! yes you can, I would suggest using lexan not plexi Quote Link to comment
RatVonDude Posted March 30, 2014 Report Share Posted March 30, 2014 Lexan! I'm reading up on it. THANK YOU! Can you form with a heat gun? Quote Link to comment
Laecaon Posted March 30, 2014 Report Share Posted March 30, 2014 Just start your own thread... 2 Quote Link to comment
datzenmike Posted March 30, 2014 Report Share Posted March 30, 2014 Ha Ha, why does everybody get so pissed on this site, I've made 15 piece molds outta plaster before, poured in wax, burned out wax, replaced with bronze but plastic is new too me. Can I buy a 1/4" strip of clear plastic and form it to make a single sun visor ( exterior ) for a 510? Many Thanks! Well, for one thing, this is a car forum... :rofl: And for second thing, what the actual fuck? :confused: This is CorAce's thread for making his grills and emblems for sale, not the "ask me how to make anything out of plastic" thread. I think this would be better received if it was in it's own thread. Quote Link to comment
RatVonDude Posted March 30, 2014 Report Share Posted March 30, 2014 Got it, Thanks Quote Link to comment
72dyme Posted April 12, 2014 Report Share Posted April 12, 2014 I ordered a set of front and rear badges. All I can say is they are amazing. They shipped fully wrapped in bubble wrap. They are such good quality. I am gonna order another set for safe keeping. I'm in the process of painting them now. They are looking good with a little bit of paint. I can't wait to see them finished. Quote Link to comment
CorAce Posted April 12, 2014 Author Report Share Posted April 12, 2014 Thanks man! I'm glad you like them. Just be careful not to over tighten the grill badge when you put it on. Quote Link to comment
danfiveten Posted April 13, 2014 Report Share Posted April 13, 2014 Lol otherwise u end up with a broken badge like my dumb ass did LOL. Dont do what dan did lol 1 Quote Link to comment
SSSP510 Posted April 23, 2014 Report Share Posted April 23, 2014 Superbly done..really amazed by your skill Mr. Corace.. :thumbup:May I ask if it's still available?Please do check your inbox too sir... Quote Link to comment
novita1021 Posted April 25, 2014 Report Share Posted April 25, 2014 Pm'd ya sir need your help Quote Link to comment
five1oh Posted May 3, 2014 Report Share Posted May 3, 2014 Sent you a PM. Amazing work, hopefully you are still taking orders, loking forward to buying one, thanks!!! Quote Link to comment
dat70s Posted June 2, 2014 Report Share Posted June 2, 2014 I'd be interested in a set! i sent you PM Quote Link to comment
GusBus Posted June 5, 2014 Report Share Posted June 5, 2014 Interested in grill and badges, sent you a PM. Quote Link to comment
dattoboy70 Posted June 13, 2014 Report Share Posted June 13, 2014 Will you be at canby and can you pm me a price please. If your not going to canby can you quote me on shipping to 90631. Thank you Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.