bananahamuck Posted March 30, 2016 Report Share Posted March 30, 2016 Oh and i just spent $150. plus tax,, on a starter for my wife's fucking lawn mower if that makes you feel less ripped off by the driveshaft guys.. That was just walk out price not put in or anything. 2 Quote Link to comment
thisismatt Posted March 30, 2016 Report Share Posted March 30, 2016 my wife's lawn mower Isn't that your lawn mower? 2 Quote Link to comment
KoHeartsGPA Posted March 30, 2016 Report Share Posted March 30, 2016 She bought it, he gets to drive it.... Quote Link to comment
bananahamuck Posted March 30, 2016 Report Share Posted March 30, 2016 Nope , she is getting older and one of my buddies gave me shit while we were drinking ice tea one day watching her using her push mower,, so i traded work for a 20 horse last year . Good thing is,, she is done faster so it gives her more time to wash dishes and such. 6 Quote Link to comment
uberkevin Posted March 30, 2016 Author Report Share Posted March 30, 2016 I could use a ride tomorrow gotta be at work at 1230. Anyone? Quote Link to comment
bananahamuck Posted March 30, 2016 Report Share Posted March 30, 2016 It's possible,,, i was probably going over to Jdongs ,, do you have to be there before 12:30 or at ? 1 Quote Link to comment
uberkevin Posted March 30, 2016 Author Report Share Posted March 30, 2016 At least 5 minutes before. Quote Link to comment
tdaaj Posted March 30, 2016 Report Share Posted March 30, 2016 I could maybe give you a ride, will be up at the court house any way, but you ll be at work at like 11, maybe you should get a ride from hammock Quote Link to comment
uberkevin Posted March 30, 2016 Author Report Share Posted March 30, 2016 So I'd need to leave my house at 12. Quote Link to comment
bananahamuck Posted March 30, 2016 Report Share Posted March 30, 2016 You will be leaving your house way the fuck before 12. 2 Quote Link to comment
uberkevin Posted March 30, 2016 Author Report Share Posted March 30, 2016 I like that. Ha. I called and asked what the tag said on my driveline, glad they still had it, 48 was the magic number. ' do not recall that number' or was it bananahamuck? 1 Quote Link to comment
bananahamuck Posted March 31, 2016 Report Share Posted March 31, 2016 Pretty sure we measured 46 1/2 center to center but if measured some other way it would be different. 1 Quote Link to comment
uberkevin Posted March 31, 2016 Author Report Share Posted March 31, 2016 That's what I remember. 1 Quote Link to comment
uberkevin Posted April 1, 2016 Author Report Share Posted April 1, 2016 Getting fixed. Next week sometime. Odd thing is there is maybe an inch and a half of the yoke splines in the tail of the tranny and it still has alot of play. He said he took out an inch to account for the suspension travel but believed that it wouldnt have as much play as it does. Anywho he's fixing it. He'll be adding a little more then a 1/4 inch. You can see here this is not quite an inch more like 7/8. But this is with the yoke in all way in the tranny. 3 Quote Link to comment
Ed-datsun521 Posted April 2, 2016 Report Share Posted April 2, 2016 Mine was 51"-1/4 if I remember correctly something like that sorry was over a year ago but I Measured from the seal to the rear end where you have it on this picture worked first try I did make sure the shop knew what I did they instructed me to measure like that 1 Quote Link to comment
bananahamuck Posted April 3, 2016 Report Share Posted April 3, 2016 In that picture i read 1 1/16th to short Since you couldn't be "bothered" to ditch that shit job and measure your intake for "us" NO CHEAP PIPES FOR YOU!!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, or us :mellow: 1 Quote Link to comment
uberkevin Posted April 3, 2016 Author Report Share Posted April 3, 2016 I think I want to try to stick with plastic any way. 1 Quote Link to comment
uberkevin Posted April 8, 2016 Author Report Share Posted April 8, 2016 Driveline is done and ready for me to pick up... when I find time.. Been killen shit at work!! 'That's a good thing for thems that don't know what I mean' 40 hours a week and any day I go over 8 hours I'm making 20 bucks, so that's nice cuz I've been going about an hour over every day I work. 3 Quote Link to comment
KoHeartsGPA Posted April 8, 2016 Report Share Posted April 8, 2016 Hopefully it won't be too long now ;) 1 Quote Link to comment
Ed-datsun521 Posted April 8, 2016 Report Share Posted April 8, 2016 You gonna be baller like tanker pretty soon 1 Quote Link to comment
Anderson521 Posted April 8, 2016 Report Share Posted April 8, 2016 Getting fixed. Next week sometime. Odd thing is there is maybe an inch and a half of the yoke splines in the tail of the tranny and it still has alot of play. He said he took out an inch to account for the suspension travel but believed that it wouldnt have as much play as it does. Anywho he's fixing it. He'll be adding a little more then a 1/4 inch. You can see here this is not quite an inch more like 7/8. But this is with the yoke in all way in the tranny. When I got a driveshaft made the guy told me that it should sit an inch back from hitting bottom. Can you not back it out and make it work? Quote Link to comment
uberkevin Posted April 8, 2016 Author Report Share Posted April 8, 2016 There is far to much wobble play with the DL bolted to the rear. 1 Quote Link to comment
datson4life Posted April 8, 2016 Report Share Posted April 8, 2016 I think it best to remove the dust cover on the spline end of drive shaft. It has 2 spot welds 1 Quote Link to comment
datson4life Posted April 8, 2016 Report Share Posted April 8, 2016 Or it wont slide into ka tranny all the way 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.