Z chopper Posted September 19, 2012 Report Share Posted September 19, 2012 a little late on the lowering discussion but here is my 2 bits. While many cars look great lower, handling can suffer if lowered too much. How I feel exactly. I think "slammed" has been over done. It's been adopted that unless your car is on it's balls, you're doing it wrong. I lowered my 76', and while most Oooo'd and Ahhh'd, I'm thinking.. "Shit, I went overboard and now I look like a friggin' clown." I still need to make it right... while this looks great I am sure the handling suffers from being lowered too much. Always remember function over form, suspension travel is there for a reason. 1 Quote Link to comment
bonvo Posted September 20, 2012 Report Share Posted September 20, 2012 DO WANT THAT MIRROR FOR MAH TRUCK!!!!!!!! strange i have one in my car and i dont think i have EVER used the night and day function its nice to have if you ever need it but i have yet to use it Quote Link to comment
RedBanner Posted September 21, 2012 Report Share Posted September 21, 2012 I have the night/day mirror, so naturaly i want the other one :lol: Quote Link to comment
Eagle_Adam Posted September 24, 2012 Report Share Posted September 24, 2012 trade ya!! Quote Link to comment
MicroMachinery Posted October 3, 2012 Author Report Share Posted October 3, 2012 Decided it was time to clean up the wheels on this girl a little bit. Took a can of Eagle One aluminum polishing swab and started in last night. Here's a wheel that's 1/2 done.I'm pretty happy with the results so far. It was my fear that I was going to have to wet sand em to get all that aluminum oxide to go away, but that doesn't seem to be the case.Now, if only there was a way to buff out that curb rash... 1 Quote Link to comment
izzo Posted October 3, 2012 Report Share Posted October 3, 2012 Looking good man! Quote Link to comment
Eagle_Adam Posted October 3, 2012 Report Share Posted October 3, 2012 aluminum is so sexy when its clean! keep it up Wax on, wax off! Quote Link to comment
O.D.D. Posted October 3, 2012 Report Share Posted October 3, 2012 wax on wax off .....its Miller time? Quote Link to comment
jesusno2 Posted October 4, 2012 Report Share Posted October 4, 2012 I know a guy that can fix that curb rash. 1 Quote Link to comment
Laecaon Posted October 4, 2012 Report Share Posted October 4, 2012 I know a guy that can fix that curb rash. What else can you fix? I have curb rash/flat spot/ and a wheel that clearly hit a curb too hard, kinda concave now. Quote Link to comment
I'm BLUE Posted November 27, 2012 Report Share Posted November 27, 2012 Hotwheelz pimpin goodness Quote Link to comment
Bentaxlebob Posted November 27, 2012 Report Share Posted November 27, 2012 A lot of noise......... Quote Link to comment
MicroMachinery Posted November 28, 2012 Author Report Share Posted November 28, 2012 Been a while since an update.. looks like it's getting a little restless in here.. Haven't done a WHOLE lot besides drive her, but a month or so ago, I was able to lay my hands on a 73' clock. Unfortunately, it wasn't working. I later found out through a series of tests, and ultimately dissection, that it was a weakened motor inside the clock that was the culprit. Since I was pretty dead set on having a factory, year-specific clock in my car, I had to take 2 clocks and make a working one. It ended up being quite an ordeal, but sometimes, that's how science(worthwhile science, that is) takes place. I'm not sure what I was thinking when I took this picture, but I had planned to do a write up on rebuilding a clock. Here's a terrible pic of the face of the 73' clock(1 year only). The organ donor(74-75' blue face clock): Some pics of the surgery.. Pics of the heart.. the precious heart.. You really don't realize and can't appreciate how intricate and amazing these old car clocks are on the inside without busting one open. I am very impressed at the detail and craftsmanship displayed in our "cheap" little cars. It took many hours getting everything put back together just right(which is why I aborted the write-up).. I don't think these were meant to be taken apart(atleast not by the average bear), and probably shouldn't be attempted if you're faint at heart, prone to frustration or are bad at keeping track of tiny parts as well as remembering where they go. Even putting it back together correctly, there were small springs and other components that if not placed in an EXACT fashion, the clock would eventually hang up and stick in one spot. I had to go back about a half a dozen times in order to finally get it to run the full 12 hours without binding or hanging up and stopping. All in all, I'm happy with the result. I'm tellin' time, just like they did it back in 73' baby! 1 Quote Link to comment
Tristin Posted November 28, 2012 Report Share Posted November 28, 2012 Wow, nice job. Ive done a few similar projects taking a few critical items apart to solder components back together. It can be a very delicate process and if you dont do it right, youi ruin both pieces. Looks like you did great! Quote Link to comment
I'm BLUE Posted November 28, 2012 Report Share Posted November 28, 2012 Ahhh man ... Taking the time and nerve doing this just shows the love and appreciation and respect you have for your ride. I wouldnt have tried to fix any of my clocks as I don't have the nerve for small items. I've watched watch makers and similiar items going through the process. I also have sausage links for fingers :lol: Nice to see the pics :cool: Quote Link to comment
jesusno2 Posted November 28, 2012 Report Share Posted November 28, 2012 Been a while since an update.. looks like it's getting a little restless in here.. Haven't done a WHOLE lot besides drive her, but a month or so ago, I was able to lay my hands on a 73' clock. Unfortunately, it wasn't working. I later found out through a series of tests, and ultimately dissection, that it was a weakened motor inside the clock that was the culprit. Since I was pretty dead set on having a factory, year-specific clock in my car, I had to take 2 clocks and make a working one. It ended up being quite an ordeal, but sometimes, that's how science(worthwhile science, that is) takes place. I'm not sure what I was thinking when I took this picture, but I had planned to do a write up on rebuilding a clock. Here's a terrible pic of the face of the 73' clock(1 year only). The organ donor(74-75' blue face clock): Some pics of the surgery.. Pics of the heart.. the precious heart.. You really don't realize and can't appreciate how intricate and amazing these old car clocks are on the inside without busting one open. I am very impressed at the detail and craftsmanship displayed in our "cheap" little cars. It took many hours getting everything put back together just right(which is why I aborted the write-up).. I don't think these were meant to be taken apart(atleast not by the average bear), and probably shouldn't be attempted if you're faint at heart, prone to frustration or are bad at keeping track of tiny parts as well as remembering where they go. Even putting it back together correctly, there were small springs and other components that if not placed in an EXACT fashion, the clock would eventually hang up and stick in one spot. I had to go back about a half a dozen times in order to finally get it to run the full 12 hours without binding or hanging up and stopping. All in all, I'm happy with the result. I'm tellin' time, just like they did it back in 73' baby! MARTY!!!!! IT'S 1955! Quote Link to comment
Eagle_Adam Posted November 28, 2012 Report Share Posted November 28, 2012 :thumbup: Quote Link to comment
MicroMachinery Posted May 3, 2013 Author Report Share Posted May 3, 2013 Just as all good amphibians do, this thread went into hibernation for the winter. Now that the sun is shining, it's time to get out and stretch. Went to start up the 1800 the other day, and with a jump on the battery, she fired right up. My ears caught something that I hadn't noticed before, a whistling. Sounds like vacuum leak.. I found the ballpark area, and let the Carb cleaner do the pinpointing.. (Yes, I know the carb hold-down nut is loose in this pic.) The whistling was coming from this area, and it was unmistakable. Pulled the carb off and.. I wasn't sure when the carb was last gone through, and it seemed to be running alright, but I like to know for sure. It does have a lacking of power at high RPMs, along with a misfire, so I figured now was as good of time as any to rule out a dirty carb. So.. Into the drink ya go. I hadn't tried this yet, but my brother told me about it, and was quite impressed with the results. Pine Sol, of all things, as a soak. 2 parts Sol, 1 part water, add a few days to steep. The result? Not too bad, if I do say so myself! Smelled nice, too :D From here, I disassembled, removed all jets, tubes, BBs, valves, etc.. and placed them out on a towel where I would remember how they went in. The 3 pieces went back in the drink for a few more days. After that, I pulled em all back out, hosed out the channels and passages with a can of Carb cleaner, then reassembled with a new gasket kit. WHAMMO! Back to work, slave.. Cranked her over enough to fill with fuel and she fired right up. Runs noticeably smoother, is more responsive, but still has a bit of a high end cut-out.. Electrical gremlins, I'm coming after YOU now.. 5 Quote Link to comment
I'm BLUE Posted May 3, 2013 Report Share Posted May 3, 2013 ahhh schweet... Wow.. that sucker looks good after being drowned for a bit in Pine-Sol goodness. That's a neat trick and I will have to try that ! Quote Link to comment
izzo Posted May 3, 2013 Report Share Posted May 3, 2013 Wow man. That stuff really cleans it well. Carb looks brand new. 1 Quote Link to comment
MicroMachinery Posted May 3, 2013 Author Report Share Posted May 3, 2013 Yeah, it's really great. Cheap, and it doesn't hurt plastics, so no need to worry about disintegrating anything important. It does affect cadmium plating somewhat, but I didn't really care. Makes grime practically fall off. Anything that doesn't dissolve comes right off with high pressure water or carb cleaner. Very effective, I'm sold. Quote Link to comment
Laecaon Posted May 3, 2013 Report Share Posted May 3, 2013 I told Converted to Datsun about that trick. He did it to one his motorcycle carbs, and the rest in carb dip. He said the Pine Sol worked just as well, but slower. Its an old trick I actually found on this forum, probably something Redeye said flippantly. 1 Quote Link to comment
I'm BLUE Posted May 3, 2013 Report Share Posted May 3, 2013 That's actually good great to know that it doesn't hurt plastics in the process , and a huge plus ! Good going Micro !! Quote Link to comment
Tristin Posted May 3, 2013 Report Share Posted May 3, 2013 I have a 32/36 I might try this with... good tip! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.