ohmrchristopher Posted July 7, 2012 Author Report Share Posted July 7, 2012 booger Quote Link to comment
ohmrchristopher Posted July 7, 2012 Author Report Share Posted July 7, 2012 Im just coping this guy. http://community.ratsun.net/topic/41791-fitted-some-new-wheels-update-2nd-pg/ I hate poke I will compromise on flares if shit goes wrong Shit always goes wrong with me I dont stop till I am happy I agree with the cops/laws/inspections and will avoid that Can't move the rims in any more or they are going to hit Not sacrificing rim dish to pick up a hammer and hit some J-Tin Expect a fun weekend ahead :P Quote Link to comment
ohmrchristopher Posted July 7, 2012 Author Report Share Posted July 7, 2012 omg this forum hates me, sorry for the double post. Quote Link to comment
ohmrchristopher Posted July 7, 2012 Author Report Share Posted July 7, 2012 Just rented a fender roller... Quote Link to comment
ohmrchristopher Posted July 7, 2012 Author Report Share Posted July 7, 2012 Just rented a fender roller... Quote Link to comment
Z chopper Posted July 7, 2012 Report Share Posted July 7, 2012 roflmao :rofl: double double posting Quote Link to comment
Z chopper Posted July 7, 2012 Report Share Posted July 7, 2012 is that the fender roller I have seen advertised for rent that also ruined peoples fenders? all posted on cl Quote Link to comment
Laecaon Posted July 7, 2012 Report Share Posted July 7, 2012 The eastwood roller/puller is the best product. It ruins things if you dont know what you are doing. Quote Link to comment
ohmrchristopher Posted July 7, 2012 Author Report Share Posted July 7, 2012 ha probably, the Eastwood one? time for the yuotubz so i leanrs right. Quote Link to comment
Laecaon Posted July 7, 2012 Report Share Posted July 7, 2012 I cant wait to see how this turns out. I love the look of a.diggers 620. Quote Link to comment
ohmrchristopher Posted July 7, 2012 Author Report Share Posted July 7, 2012 Edit bad pictures. Quote Link to comment
jrock4224 Posted July 30, 2012 Report Share Posted July 30, 2012 wow dont do it.....no roller or baseball bat( my prefered method and easier to do with out fing up something)....pretty sure sheetmetal wont stretch that far though Quote Link to comment
Lee R Posted August 21, 2012 Report Share Posted August 21, 2012 Whatever happened to the Pitney's???? Quote Link to comment
Z chopper Posted August 21, 2012 Report Share Posted August 21, 2012 any updates?? Quote Link to comment
ianlink Posted November 19, 2012 Report Share Posted November 19, 2012 whoa man, you need to sell me those wheels, they will look sooooo ugly on there.......... Quote Link to comment
metalmonkey47 Posted January 9, 2013 Report Share Posted January 9, 2013 bump! 1 Quote Link to comment
ohmrchristopher Posted November 15, 2013 Author Report Share Posted November 15, 2013 *yawn* Well hey there everyone. Been busy driving the truck rather than working on it. Big thanks to everyone I met at Canby this year. Cant wait for next year. So what is the state of my little yellow truck... Radaitor flush, new upper/lower hoses. Lower one was wrong and getting friendly with the frame Weber carb, emission deletes, lots of tuning. Purs at 500RPM and has great throttle responce. Longer wheel studs. Some brake adjustments to no avail. [still shudders under braking.] New clutch slave/hose and ghetto fluid flush. Bought a gray flake canopy. [$100, why not :p] Bought a Nardi deep corn, still figuring out how to install. :/ Bought a new carpet, its currently warming up in the house until I do the minor floor rust removal. Bought a Aztec/Mexican blanket to hopefully reucover the bench seat with. D21 sub-frame can be had at my JY for $150 so I may convert to ball-joint front end. Would solve my brake issues. Engine wiring harness is being disected, 8 or so wires removed that were not plugged into anything or had the systems removed. Would like to upgrade ALT and headlight harness, make the seperate from each other. Front junk stripped down for cleaning and polishing (bumper) Pitney wheels are sitting above the the truck in the rafters. >:D Driver hood hinge is cracked at the mount/fuse weld. Would like to clean up the roof rack, bust off some slag and remake some of the bars as one piece. Also redo the wood slats to match the new Nardi wheel. Yup. Thats about is. Will be posting photos of either the floor or the engine on Sunday. I am going to school for my Welding C and working at a liquor store at night, so I dont have much free time. But I have all winter to chip away at everything. Later Quote Link to comment
Farmer Joe Posted November 15, 2013 Report Share Posted November 15, 2013 welcome back! lol, i still have the video from canby of you doin the foot assisted wizard staff beer drink... Quote Link to comment
ohmrchristopher Posted November 15, 2013 Author Report Share Posted November 15, 2013 Video?! I need to see this, fuckkkk upload that shit! 1 Quote Link to comment
Z chopper Posted November 15, 2013 Report Share Posted November 15, 2013 welcome back! lol, i still have the video from canby of you doin the foot assisted wizard staff beer drink... Video?! I need to see this, fuckkkk upload that shit! I gotta see this. ohmrchristopher how is Kelowna treating you? Quote Link to comment
ohmrchristopher Posted November 15, 2013 Author Report Share Posted November 15, 2013 Better then Vancouver. Got a nice small group of friends. Going to school again is a big positive. Bought a 450cc bike and did a lot of riding. Its been good but time to tear into the truck :D Quote Link to comment
Farmer Joe Posted November 15, 2013 Report Share Posted November 15, 2013 Video?! I need to see this, fuckkkk upload that shit! lol, ill get it going when i get home Quote Link to comment
DAT510 Posted November 15, 2013 Report Share Posted November 15, 2013 Is anybody else having problems with the pictures? Quote Link to comment
ohmrchristopher Posted November 15, 2013 Author Report Share Posted November 15, 2013 I deleted my Flickr. So there are no pictures at all lol. Sorry. I plan to take some new ones and update from there. But anything in the past posts are done. If you are looking for anything in particular I can hook you up. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.