herculesinwyoming Posted August 18, 2011 Report Share Posted August 18, 2011 nice!! congrats!! Quote Link to comment
Pumpkn210 Posted August 18, 2011 Author Report Share Posted August 18, 2011 Had to go get a new plug for the gas tank, the old one had been ruined by the Botched chroming process... Seems to be a running theme with this thing :blink: Quote Link to comment
]2eDeYe Posted August 19, 2011 Report Share Posted August 19, 2011 Lame about the chrome....Awesome about the runner :thumbup: Quote Link to comment
Jester Posted August 19, 2011 Report Share Posted August 19, 2011 WAY TO GO DAVE!!!!!!!! Quote Link to comment
Pumpkn210 Posted August 19, 2011 Author Report Share Posted August 19, 2011 So at the end of the day... Fuel Drain plug replaced with New plug, tank fueled and ready... Old wire harness set out for inspection/help with repairing the one in the truck(no power in cabin or engine bay) Have to finish raising the front. Gotta get the coling system finished so I can tune the engine. Got the can-a-pee off and sweapt out the bed... The tire is too close, gotta Raise It Up! :blink: Got help and parts comin in the mornin! DatDoug and Elmer are comin over, Elmer for the wiring and Doug for his vast knowledge of 620s and part supply ;) Thanks in advance to both of you, top notch! :cool: Quote Link to comment
Pumpkn210 Posted August 19, 2011 Author Report Share Posted August 19, 2011 Sir, would you like some Stance? Yes Please! Quote Link to comment
]2eDeYe Posted August 19, 2011 Report Share Posted August 19, 2011 Love this truck!!! :cool: Quote Link to comment
Pumpkn210 Posted August 19, 2011 Author Report Share Posted August 19, 2011 Workin on it been slow goin cause of lack of blood flow to upper extremities! :wub: Quote Link to comment
Pumpkn210 Posted August 20, 2011 Author Report Share Posted August 20, 2011 Still cant seem to get power into the harnes to do anything... And the brake master is Bad, so Im goin to pick-n-pull in the mornin after I earn some moneys! A litle behind schedule but on track to make it to Sonic! :cool: Quote Link to comment
DatDoug Posted August 20, 2011 Report Share Posted August 20, 2011 Truck looks killer Dave :cool: Hope to see it @ the meet :D Quote Link to comment
Eagle_Adam Posted August 20, 2011 Report Share Posted August 20, 2011 lookn sweet man! love it without the can-O-pee Quote Link to comment
tdaaj Posted August 20, 2011 Report Share Posted August 20, 2011 Lookin good man, see you in the morning, we'll get that one last major piece you need. Quote Link to comment
Pumpkn210 Posted August 20, 2011 Author Report Share Posted August 20, 2011 Yea and a BooK! Need to get this wiring BS figured out ASAP! And Again a scecial thanks to DatDoug and ElmerFudPucker for comin out with parts and time to help in the saving of this forgotten custom! :fu: Quote Link to comment
bananahamuck Posted August 20, 2011 Report Share Posted August 20, 2011 So your going over to Tdaajs to " get a piece " ?? Quote Link to comment
DatWifey Posted August 20, 2011 Report Share Posted August 20, 2011 So your going over to Tdaajs to " get a piece " ?? brown chicken, brown cow! ^_^ Quote Link to comment
elmerfudpucker Posted August 20, 2011 Report Share Posted August 20, 2011 I need one of your guys to post oics of a 74 620 wire harness next to the battery, I am wondering if we are missing a wire. I got one fusible link and think there may be two. But intill then here is some footage of the first run and of Dave and Doug. There is nothing but sound when it comes to me, I was nervous to hand them the camera! ;) Up and running! And one of our heros riding off after a job well done!! Nuckin Futs is moving!!! Anyhow, 3 hours of sleep and I am back at work... I guess I can sleep when Im dead! :D Quote Link to comment
DatDoug Posted August 20, 2011 Report Share Posted August 20, 2011 Awesome vid of the gOOn Elmer. :D Thanks. Very Cool :cool: Remember tho, Shut the fuck up Donny! :rofl: Quote Link to comment
elmerfudpucker Posted August 20, 2011 Report Share Posted August 20, 2011 Awesome vid of the gOOn Elmer. :D Thanks. Very Cool :cool: Remember tho, Shut the fuck up Donny! :rofl: :lol: Quote Link to comment
1lo620 Posted August 20, 2011 Report Share Posted August 20, 2011 Man you have put some wrench time into that truck..kudos, it is nice to see it up and moblie...Wish I could be crusin next to ya on the way to the Datsun cruisin tomorrow in my chop top, but still have to get exhaust done and tailights....But hope you get it up and rolling....!!! Quote Link to comment
Pumpkn210 Posted August 21, 2011 Author Report Share Posted August 21, 2011 Still need some slaves for the brakes. Butt First, I gota figure out how to get the stupid drums off! <_< Quote Link to comment
1lo620 Posted August 21, 2011 Report Share Posted August 21, 2011 Arent there 2 bolt wholes on the drums so that you can put 2 bolts in and push them out...I know both of my 620s have them..and just use a rubber mallet and start tapping away..I am sure alot of it is rust also.. I know my chop top drums where a bitch to get off...I know you will get them off I have the ut-most covidence in you!!!! I want to be able here in the next few weeks to go out crusin in your truck and my chop top!!! And whom ever else want to come!! Quote Link to comment
Pumpkn210 Posted August 21, 2011 Author Report Share Posted August 21, 2011 Thin wheel grinder cleared em, meow Im rebuilding the front slaves, fingers crossed! Thanks 1lo! Quote Link to comment
ZackTheImpaler Posted August 21, 2011 Report Share Posted August 21, 2011 I want to hear that thing in my front yard! Sounds seriously thick...when ya gonna be in everett again? So you can maybe possibly...grab..that..cam...for...me..... Cause I'm jealous of your engine sounds<_< Quote Link to comment
Pumpkn210 Posted August 21, 2011 Author Report Share Posted August 21, 2011 Slaves BAD! Needing thems! Quote Link to comment
DatDoug Posted August 21, 2011 Report Share Posted August 21, 2011 There called "WHEEL CYLINDERS" :fu: They are cheap. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.