jun Posted June 20, 2011 Report Share Posted June 20, 2011 I may be bringing one of my JDM Bluebird grilles for possible trades. Not sure yet, but if any interesting trades come across, I may be interested. We'll see. Also, anyone heading out from the south bay/beach cities area? Torrance/Redondo/etc? Quote Link to comment
yellowdatsun Posted June 20, 2011 Report Share Posted June 20, 2011 I'm looking for a set of rear Z32 calipers. Anyone? Quote Link to comment
INDY510 Posted June 20, 2011 Report Share Posted June 20, 2011 . I have a full bolt in Autopower roll cage with extra door bars for a 510 (full race cage, not just a roll bar)...... SCCA legal ,,, never been installed ...... $1000obo and a pair of 16x9 -13 Watanabes with 225/45/ZR16 BF goodrich G-force tires with 0.5miles on them ...... $1500obo ..... I'm not going unless someone is seriously interested in one of the above items Quote Link to comment
thisismatt Posted June 21, 2011 Report Share Posted June 21, 2011 I'm still interested in finding a straight 521 tailgate if anyone has one. Quote Link to comment
DREWSDIME Posted June 21, 2011 Report Share Posted June 21, 2011 JUN do you have any 68 510 grills? Quote Link to comment
thatsoon510 Posted June 21, 2011 Report Share Posted June 21, 2011 ok guys I wll be there with emblems side draft webers etc but mosly emblems sss 1600sss grill emblems etc Quote Link to comment
the510keeper Posted June 21, 2011 Author Report Share Posted June 21, 2011 ok guys I wll be there with emblems side draft webers etc but mosly emblems sss 1600sss grill emblems etc Need COUPE badges in the worst way, Virginia looks holy with out them I have a few carbon fiber BRE spook airdams $130, and a NOS tailpanel $600 trade Ultimate airdam, fiberglass never mounted, sealed in high build primer surfacer, but has a few pin holes, needs sanded and resprayed NEW. $300 OBO BRE airdamn fiberglass $100 Used 68-69 fender $50 Red front bigger sway bar $80 Quote Link to comment
jun Posted June 21, 2011 Report Share Posted June 21, 2011 JUN do you have any 68 510 grills? I sure wish I did! Unfortunately, I do not. I'm sure you'll find one there though. Quote Link to comment
AZhitman Posted June 21, 2011 Report Share Posted June 21, 2011 I'm still interested in finding a straight 521 tailgate if anyone has one. I have one, but it's in Phoenix... Might be able to persuade yellowdatsun (Ryan) to haul it out with him? Quote Link to comment
motavated Posted June 21, 2011 Report Share Posted June 21, 2011 LOOKING FOR A CLEAN 620 BUMPER! Quote Link to comment
Mazdatsun89 Posted June 21, 2011 Report Share Posted June 21, 2011 I have a datsun 510 estate i wanna put in the car show What's the info on how you enter the show? Quote Link to comment
rayz510 Posted June 21, 2011 Report Share Posted June 21, 2011 All you do is show up and pay your $5 and you're in the show.....Just be sure to get there before all the spaces fill up.... Quote Link to comment
Akeboshi Posted June 21, 2011 Report Share Posted June 21, 2011 Hey all, I'll be looking for a 280z dash if anyone has one please bring it. It can have cracks but hopefully undamaged otherwise. Mine is too far gone. Marcus Quote Link to comment
Shagy Posted June 21, 2011 Report Share Posted June 21, 2011 James, check your PM's... =) Quote Link to comment
jun Posted June 21, 2011 Report Share Posted June 21, 2011 For those parked in the event, are we able to get out earlier than 2? Or is everyone going to be jammed in with no where to go. I'll need to cut out earlier. Quote Link to comment
Shagy Posted June 21, 2011 Report Share Posted June 21, 2011 ^ Park near the exit....last time people were packed in pretty good. Quote Link to comment
rpowell25 Posted June 22, 2011 Report Share Posted June 22, 2011 Looking for a straight 510 hood, cowl, and core support brace. See Ya there. Quote Link to comment
SuperD Posted June 22, 2011 Report Share Posted June 22, 2011 I have one, but it's in Phoenix... Might be able to persuade yellowdatsun (Ryan) to haul it out with him? i'll haul it out there for you. heading out there with a truck and trailer anyway to pick up my 510 from James. give me like 5 bucks. or some Datsun parts. ill PM you my number. Quote Link to comment
NICOYA Posted June 22, 2011 Report Share Posted June 22, 2011 Looking for a straight 510 hood, cowl, and core support brace. See Ya there. i'll take some cowls for 510 Quote Link to comment
thatsoon72 Posted June 22, 2011 Report Share Posted June 22, 2011 looking for OS Giken head. Just kidding. haha Quote Link to comment
Ultramagnus Posted June 23, 2011 Report Share Posted June 23, 2011 So is anyone from nor.cal or SD coming with CF parts and i pm'ed somebody about the bolts i need for the 280zx calipers. Otherwise i'm not gonna waste 45min drive and spend $20 for parking and food. Quote Link to comment
Shagy Posted June 23, 2011 Report Share Posted June 23, 2011 I think JAmes might be brining some CF parts... PM the510keeper Quote Link to comment
the510keeper Posted June 23, 2011 Author Report Share Posted June 23, 2011 So is anyone from nor.cal or SD coming with CF parts and i pm'ed somebody about the bolts i need for the 280zx calipers. Otherwise i'm not gonna waste 45min drive and spend $20 for parking and food. Yes we will have some carbon parts, airdams and door sills misc door panels, and few other things. Not a waste you get to check out in person a bunch of nice rides. Shit were driving 16 hours to make the trip. I have the bolt you need for ur calipers also. PM me with request loading the truck Friday and leaving 4:30 Sat Quote Link to comment
Ultramagnus Posted June 23, 2011 Report Share Posted June 23, 2011 Yes we will have some carbon parts, airdams and door sills misc door panels, and few other things. Not a waste you get to check out in person a bunch of nice rides. Shit were driving 16 hours to make the trip. I have the bolt you need for ur calipers also. PM me with request loading the truck Friday and leaving 4:30 Sat Sent you a PM and thanks Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.