Shagy

looks like the collector that came with the 510 engine is different from the 521 one that was in the truck. I got the 521 oil pan the other day from a member (on Facebook) out of California. So now I just need the pick up tube or I need to see if I can modify the 510 one to work. There is a local guy in AZ selling a whole engine out of his 521, or course right after I went and bought one.

well that's a plus.

Are the engine brackets the same?? I have mounts installed on the truck that look original but not sure about the brackets.

We did that to clean out EGR stuff...work great.

either of these I guess? https://www.ebay.com/itm/282084027626?_nkw=weber+throttle+linkage+for+datsun&itmmeta=01J5GGFTA4DRYP24CQ1DPXXERF&hash=item41ad84acea:g:a1IAAOSwJDpmIDlj&itmprp=enc%3AAQAJAAAA4HoV3kP08IDx%2BKZ9MfhVJKlRDNHNNlEpHDKb3nr0LEkh4%2Buwe%2B7vZlDofXa5ETPfUSYnpZuyhUS1V0kUXjrzowMxrtTk6xuXDXlhCBtj37ASErBkQD7UbQ7ld%2Ffuxn23eDyFPXrtdiHiWuad0RgQZUKuV%2BeMOTr3hHqRFGM8gYR%2ByRJ1ZeCHGJOtKjVHgL3sUKNohgAKjdvOg136MBozdLbrphK2JlvmBVlt9pihFtqaBe2D3vwZYfCmXxV%2B0AcxGxO9lY5WpfYWAEADXJfDbqeA%2FN49T1qPyvOTda6a%2Bae8|tkp%3ABk9SR5Slv5CsZA https://www.amazon.com/Weber-Redline-Carburetor-Linkage-99007-675/dp/B0BZWTGNWD/ref=pd_lpo_sccl_3/137-9403761-0170015?pd_rd_w=61vfF&content-id=amzn1.sym.4c8c52db-06f8-4e42-8e56-912796f2ea6c&pf_rd_p=4c8c52db-06f8-4e42-8e56-912796f2ea6c&pf_rd_r=NQ1480XV8VG1VPMC5RCT&pd_rd_wg=tCt6N&pd_rd_r=9409982f-d214-4829-a6c2-2bfb5f6af978&pd_rd_i=B0BZWTGNWD&psc=1

looking up the cable and found this if anyone else is looking. From AutoZone. Pioneer Accelerator Cable CA-8824 https://www.autozone.com/fuel-delivery/accelerator-cable/p/pioneer-accelerator-cable-ca-8824/865767_0_0

I'll have to figure that part out. The cable is broken on the truck. happen to know if the adapters are available? or is it just the stock truck one?

We grabbed an L16 from a local 510 guy today. Now we need to find the oil pan and pick up tube. Forgot that they were not the same. Anyone close to Phoenix have one????? Replaced the engine mount bolts and in the process had to clean up the threads. Bolts didn't wanna come out smooth.

Looks good. I've been having similar thoughts with mine. The lamps are all busted and you can push your finger through the back.

can you re post the photos of the lamps? I see all this talk about them but no photos..

Thats what I was thinking, but I've seen a few very similar ones in photos. I'd love to have the bumper ettes again. I have a feeling this is just boing to end up with a piece of pipe like an "off road" bumber.

Have not had much time to spend with the truck. Got the inside kind of cleaned out and this back bumper taken off. Did these come on as a dealer option? I've seen similar ones in photos. Also looks like this truck make the trek from Washington to Arizona.

Yes it's on the core support.

This looks like too many numbers for a paint code. Anyone have a clue what it is? Doesn't match the Vin.

I dig that. nice and smooth.