SSS510 Posted August 29, 2011 Report Share Posted August 29, 2011 Ron davis radiators (sr swap 510 radiator) http://www.rondavisradiators.com/ Is there a part # for the radiator?? Quote Link to comment
SR20DETdatsun510 Posted August 29, 2011 Report Share Posted August 29, 2011 Is there a part # for the radiator?? ^^^ I think you may have to get them from Mario Lazano over at TSR. He is the one that worked with Ron Davis to get them made...^^^ Quote Link to comment
calvarez Posted November 8, 2011 Report Share Posted November 8, 2011 i need a back light for a dadsun Nissan 80 Quote Link to comment
Shagy Posted January 23, 2012 Report Share Posted January 23, 2012 Can I get listed here for Chrome Service, Vehicle Tracking, LED lighting & H4 headlamp conversions.... I have no web site as I dont know how to build one but you can google FG Motorsports... Quote Link to comment
Booger Posted February 5, 2012 Report Share Posted February 5, 2012 This is exactly what I was looking for. Great thread. Quote Link to comment
]2eDeYe Posted February 5, 2012 Report Share Posted February 5, 2012 Guess I should add my parts. Version 2.0 of my KA24-620 Swap brackets. The mounts are a 3/4" drop from the factory KA mounts. They will fit the KA24E and KA24DE with stock 620 rubber motor mounts and allow you to bolt the KA to your 620. These mounts require the later style 620 rubber motor mount for the L20B. You will still have to deal with the center link flip/ oil pan clearancing with the DE swap and any transmission issues due to your choice of transmission. If you run a 720 5-speed from behind a Z-series motor it should bolt to the stock transmission mount at the stock crossmember location. Mounts are powder coated black and ready to install. 620 KA24 Motor Mount Brackets 1 Quote Link to comment
MkS30 Posted February 14, 2012 Report Share Posted February 14, 2012 Hella E-Code H4 Conversion Rally Lights Only a hundred bucks (give or take) and the e-codes are a must have improvement over the standard sealed beam lights! Plus, they take an H4 bulb. Sweet Quote Link to comment
Turbo210 Posted June 12, 2012 Report Share Posted June 12, 2012 Anyone know of any sites i can get 1982 Datsun 210 parts from Quote Link to comment
Willdatsun Posted June 13, 2012 Report Share Posted June 13, 2012 shamless plug for my site www.datman.co.uk worth a look if you need parts for B210,A10,B310,610,810 1 Quote Link to comment
jeckle4043 Posted July 23, 2012 Report Share Posted July 23, 2012 I'm looking for some 521 truck parts if you know of any good websites. Quote Link to comment
Cleopatra Jones Posted August 21, 2012 Report Share Posted August 21, 2012 found this by accident in a random search for 210 parts. this place has a lot of nos they acquired and looking to sell at pretty good prices for many different models. just make sure you double check the part numbers to their descriptions. they tried to identify what the part was but may not necessarily be correct (they do have a disclaimer to this effect). and you may even want to check the part against the photo if there is one just to be on the safe side. http://www.oem-surplus.com/nwp/partslist.htm Quote Link to comment
510T Posted October 6, 2012 Report Share Posted October 6, 2012 Design products is now: http://www.dpracing.co/ Also I thought we should add The 510 Archives here: https://docs.google....dit?hl=en&pli=1 Quote Link to comment
710-HULK Posted October 7, 2012 Report Share Posted October 7, 2012 I would like to purchase an electronic ignition(distributor), used working, or new. If no one has one for sale, what kind and where can I find a good deal on one? Quote Link to comment
Cleopatra Jones Posted October 18, 2012 Report Share Posted October 18, 2012 Found this place for weatherstripping. Vintage Rubber in Fullerton, CA. Website is http://www.vintageru...com/datsun.aspx. Prices are very good. He's got just about every Z, 510, Roadster and pickups. Only thing lacking is the rest of the 10 series. He said he's had a lot of requests but needs samples in order to make them. Some may even match some of the other models like the early 240Z matches the hatch on the 510 wagon. The scoop on the place is if you need seals for a model he doesn't have he'll need a 3" sample to look at. If it matches another car you're lucky. If not, he said they put the cars on their wish list which they review at the beginning of the year. It could take 2-3 months to do new weatherstripping for a model they haven't done. If it's too complicated it could take longer if at all. I spoke with Randy over there. Seems like a really nice guy and may be another alternative to datsunlandsocal since Vintage has a few more models. I'm working on getting him a 210 sample to see if by chance it's the same as one of the other models he does carry. Oh, and he said he's got a supplier in Australia that may have what you need as well but they only sell to other dealers so send him an email and ask. He actually gets the 1/4 window seals for the 510 from Australia. 1 Quote Link to comment
THAT_GUY_WIT_DATSUNS Posted October 25, 2012 Report Share Posted October 25, 2012 tabcobodyparts.com Quote Link to comment
shaheen016 Posted January 30, 2013 Report Share Posted January 30, 2013 hi dears.. Ihave datsun 520 M1966 and if some one could help me . Im looking for steering and two yellow front lamp under beam light and hood embleme written datsun on red plate doesnot matter if they were used or new . thanks alot 2 Quote Link to comment
Old Rob Posted March 7, 2013 Report Share Posted March 7, 2013 This site has V6, V8, engine conversion parts for the 521, 620, 720 trucks. They also have tech available for conversions. www.powerbyace.com 1 Quote Link to comment
paulb210 Posted April 3, 2013 Report Share Posted April 3, 2013 Thanks for the info 1 Quote Link to comment
iCruZ Posted April 5, 2013 Report Share Posted April 5, 2013 I'm new to Ratsun page, but I was wondering if you knew of a link where I could find an original radiator to a 1970 Datsun 520 (Not completely sure if its a 520 or 520..cant tell the difference) or an aftermarket radiator that would easily bolt on. Any help would be great ! thanks 1 Quote Link to comment
BEAST JOHNSTON Posted April 5, 2013 Report Share Posted April 5, 2013 I recently acquired a 1981 Datsun 510 wagon with the Z20 (s) engine. I'm looking for parts. I'm NOT a purist so originality or stock parts are NOT required as I am willing to "SWAP" just about anything that would work. Most importantly I'm looking for a carburetor for the Z20, OR an aftermarket intake/carb, Or adapter plate to the stock intake. I'm also looking for interior parts, ie, front seats, back seat (wagon), center console. None of these need to be original 81 510 stuff as I'm willing to swap and customize just about anything. As for my 64 roadster it is getting a 4 wheel disc brake swap. I'm using 1989 240sx brake calipers, rotors, master cylinder, and making my own caliper brackets out of aluminum from a pattern I'm making so some of you early Datsun roadster guys my be interested in how I made caliper brackets to retro-fit your Datsun to a modern braking system. Please email me with parts/pics or comments; johnbeastjohnston@gmail.com 1 Quote Link to comment
Camtron Posted May 2, 2013 Report Share Posted May 2, 2013 Be careful with nissanparts.cc (Bruce Titus Auto Group). They list a lot of NLA parts as available and in stock that aren't. 2 Quote Link to comment
Monster82Datsun Posted May 20, 2013 Report Share Posted May 20, 2013 Looking for the original Rubber floor for a 1982 Datsun 720 that had DATSUN in-boss in it much be for a king cab William at looneytoonfarms@gmail.com 1 Quote Link to comment
datzenmike Posted May 20, 2013 Report Share Posted May 20, 2013 I recently acquired a 1981 Datsun 510 wagon with the Z20 (s) engine. I'm looking for parts. I'm NOT a purist so originality or stock parts are NOT required as I am willing to "SWAP" just about anything that would work. Most importantly I'm looking for a carburetor for the Z20, OR an aftermarket intake/carb, Or adapter plate to the stock intake. I'm also looking for interior parts, ie, front seats, back seat (wagon), center console. None of these need to be original 81 510 stuff as I'm willing to swap and customize just about anything. As for my 64 roadster it is getting a 4 wheel disc brake swap. I'm using 1989 240sx brake calipers, rotors, master cylinder, and making my own caliper brackets out of aluminum from a pattern I'm making so some of you early Datsun roadster guys my be interested in how I made caliper brackets to retro-fit your Datsun to a modern braking system. Please email me with parts/pics or comments; johnbeastjohnston@gmail.com . This is not the Parts Wanted section. It's a place for links to Datsun parts and little else. Please make the required 25 posts and you can place an ad in the CLASSIFIED section by clicking on the CLASSIFIEDS just under the 510's front bumper at the top of the page. Trust me it doesn't take that long and gives members a chance to get to know a perfect stranger that also has a Datsun. Start an A10 waGOON project post here... http://community.ratsun.net/forum/6-project-datto/ A hello I'm ..... introduction post here... http://community.ratsun.net/forum/4-general-discussion/ A personal Datsun story here... http://community.ratsun.net/forum/7-datsun-stories/ Or a few questions and you're there. Always include pictures, you'll be asked. 2 Quote Link to comment
Sierra Posted June 27, 2013 Report Share Posted June 27, 2013 Has anyone order parts from: www.amayana.com Would like know your experience with the product or service. 1 Quote Link to comment
dimeguy 510 Posted October 31, 2013 Report Share Posted October 31, 2013 I need to find a distributor for an S14 SR20DE motor. There are some listed on ebay but they're in Australia and they won't ship here. The P/N is 22100-65F11. Anyone help a fellow Datsun owner? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.