jun Posted March 25, 2011 Report Share Posted March 25, 2011 New MSD coil, NGK plug wires, went over all the ignition wiring, checked plugs, and checked all connections. Topped off the SU's with ATF. cleaned air filters. I didn't need the wires or coil, but whatever...I had store credit to burn up :D Also installed my NOS hood trim and hood bumpers. Quote Link to comment
71dime Posted March 26, 2011 Report Share Posted March 26, 2011 got my main hoop done for the cage Quote Link to comment
spitznoz Posted March 28, 2011 Report Share Posted March 28, 2011 I know its not a dime but Ive been working hard for the past 4 days(unpredictable weather) and wanted to share :lol: my dime did help carrying the rear end from pick and pull Replaced the whole rear of my truck i did it all by myself and now it hurts when i breath :lol: new rear old rear Quote Link to comment
merlin Posted March 28, 2011 Report Share Posted March 28, 2011 Finished the filler and sprayed on two coats of high build primer filler. Quote Link to comment
benzo Posted March 28, 2011 Report Share Posted March 28, 2011 after a week or constant rain got wash and wax it and vaccum it out and clean engine bay. got the wife a newer car so don't need to drive the wagon to work anymore and I can get back on my bike. Yay for me. Quote Link to comment
71DIMER Posted April 3, 2011 Report Share Posted April 3, 2011 I got some new in box 15" Work Equip 03's and swapped my tires from my Watanabe's on to them so I can refinish the Watanabe wheels (again). Took some pics... Here's the wheels just out of the box... Here they are on my 1968 goon... Quote Link to comment
Dat510_Chris Posted April 12, 2011 Report Share Posted April 12, 2011 New battery and cables, replaced valve cover gasket Quote Link to comment
SSCustomsWeb.com Posted April 13, 2011 Report Share Posted April 13, 2011 New Gansta White Walls on the Ride. 2.25" whites :) Quote Link to comment
5dimer Posted April 13, 2011 Report Share Posted April 13, 2011 I put a center console in last night. Quote Link to comment
Shagy Posted April 13, 2011 Report Share Posted April 13, 2011 ^ Looks good.... I cleaned mine out... Quote Link to comment
5dimer Posted April 14, 2011 Report Share Posted April 14, 2011 I did some more cleaning and fixing stuff inside last night. Quote Link to comment
Dimerforlife13 Posted April 18, 2011 Report Share Posted April 18, 2011 Today I pulled the L16 out of my new goon project, tore it down for inspection. One broken piston, everything else was real nice I also tore the KA24e that going in the goon down, and took it and the L series to the machine shop. Good day for me... Quote Link to comment
510kevin Posted April 18, 2011 Report Share Posted April 18, 2011 i drove the absolute shit out of my dime today!!! :P 1 Quote Link to comment
Rustina 510 Posted April 18, 2011 Report Share Posted April 18, 2011 I worked hard on my dime today and finished prepping the full passenger side floor pan. Before And the prepped pan And what it will look like once it's welded in. I'm pretty proud of the hard work this took and how good it looks. Hoping to get the drivers pan ready next weekend!!! Quote Link to comment
Creepy Cruiser Posted April 18, 2011 Report Share Posted April 18, 2011 I drove the crap out of mine today. Went to the local meet & BBQ, and drove it some more after that. Love it! Quote Link to comment
Rollover_Red Posted April 18, 2011 Report Share Posted April 18, 2011 i blew up my tranny yesterday =]]]]]] Quote Link to comment
ohio510 Posted April 20, 2011 Report Share Posted April 20, 2011 so i was doing some body work and realized that this was missing? what is it for car runs great kinda confused need to get a real manual.:blink: Quote Link to comment
Shagy Posted April 20, 2011 Report Share Posted April 20, 2011 thats the manual fuel pump..... Quote Link to comment
ohio510 Posted April 21, 2011 Report Share Posted April 21, 2011 ahh po switched to a electric in the 80s makes sense that's its gone cool. feel dumb though lol Quote Link to comment
Doctoraudio Posted April 21, 2011 Report Share Posted April 21, 2011 I took out the 35 amp and put in a Powermaster 140 amp! http://community.ratsun.net/topic/29901-doctoraudios-1969-snow-white-goon/page__st__80 Quote Link to comment
banzai510(hainz) Posted April 21, 2011 Report Share Posted April 21, 2011 Dr Audio you sure thats not a 50amper? kinda big looking. The 610 and early 71s had external 50 ampers Dont matter now You swap it already. I assume you shorted the wht/red&wht/blk and the yellow and white. where the old volt reg went Quote Link to comment
SyCK Posted April 23, 2011 Report Share Posted April 23, 2011 Cleaned up a ton of gunk off the steering links and re-greased them all, cleaned/scraped all of the wheel wells and resprayed with black undercoating and repainted the sway bar. Quote Link to comment
ohio510 Posted April 26, 2011 Report Share Posted April 26, 2011 test fit new badge(thanks fixer) also picked up vintage ohio plates we can use them for dailys here Quote Link to comment
Rustina 510 Posted April 27, 2011 Report Share Posted April 27, 2011 Finished the drivers side floor pan prep work last weekend!!! Quote Link to comment
erikcarter Posted April 27, 2011 Report Share Posted April 27, 2011 Just tacked up but I got one side done, will finish the other tommorow Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.