Tristin Posted January 16, 2013 Report Share Posted January 16, 2013 I just probably missed it. I mostly just refresh "New Content" so I miss things sometimes. Quote Link to comment
FireFighterZach Posted January 16, 2013 Report Share Posted January 16, 2013 If you have some pretty gnarly windows, after you clean all the shit off them you can scrub them with 0000 steel wool. It will get all the hard to clean stuff off. I'm gonna have to try that cause there are water marks that I can't scrub off at all Quote Link to comment
Tristin Posted January 16, 2013 Report Share Posted January 16, 2013 Just make sure its the ultra-fine stuff... used it at a previous detailing job. Works great. 1 Quote Link to comment
Laecaon Posted January 16, 2013 Report Share Posted January 16, 2013 Yep 0000 steel wool works well. Though Water marks are tough. Quote Link to comment
SoCal Rotarito Posted January 18, 2013 Report Share Posted January 18, 2013 Got myself a used rims for the holiday. SSR GPO 17" Staggered. 1 Quote Link to comment
dr.feltersnatch Posted January 18, 2013 Report Share Posted January 18, 2013 not quite ready for real paint yet but sick of not driving it, the answer is a rattle can! went from this to this also got my new momo wheel installed Quote Link to comment
510T Posted January 19, 2013 Report Share Posted January 19, 2013 I love a properly flared four door:) Please sir, I want some moar! Quote Link to comment
Laecaon Posted January 19, 2013 Report Share Posted January 19, 2013 New headlights(my thread has more pictures and description): Quote Link to comment
FireFighterZach Posted January 20, 2013 Report Share Posted January 20, 2013 The goons tank was very leaky, so I took out the tank, replaced hoses I could, put it back together(4 hours later), then I filled it up and still leaking bad. I think I'm just gonna take it to shop. Quote Link to comment
merlin Posted January 20, 2013 Report Share Posted January 20, 2013 I love a properly flared four door:) Please sir, I want some moar! Here's the build thread... will be posting updates as soon as photobucket allows http://community.ratsun.net/topic/27400-snowballs-chance-510-rotisserie-resto-project/ 1 Quote Link to comment
SoCal Rotarito Posted January 22, 2013 Report Share Posted January 22, 2013 Going head to head. Puente Hills Mazda SoCal meet 1/19/13.... Quote Link to comment
Big_E-Dog Posted January 23, 2013 Report Share Posted January 23, 2013 finally finished all the half burnt wiring with new replaced wires. turn signals, hazards, brakes, digi clusterall of it. was a pain but its finally done. now i can start working on the exhaust Quote Link to comment
Docsis510 Posted February 2, 2013 Report Share Posted February 2, 2013 installed a stereo.... Quote Link to comment
slowmomiata Posted February 10, 2013 Report Share Posted February 10, 2013 pulled off the stock manifolds and started mocking up my draw through turbo setup, i will start a build thread when i have pics, its a full diy junkyard scrap metal ratsun rodding build Quote Link to comment
dattoboy70 Posted February 17, 2013 Report Share Posted February 17, 2013 I replaced my timing chain. I'm yet to start because i need a starter but ill get it going tomorrow. 1 Quote Link to comment
dattoboy70 Posted February 17, 2013 Report Share Posted February 17, 2013 not quite ready for real paint yet but sick of not driving it, the answer is a rattle can! went from this to this also got my new momo wheel instal anybody know what wheels these are? i found a set at a local junkyard Quote Link to comment
DISLEXICDIME Posted February 18, 2013 Report Share Posted February 18, 2013 i took this pic Quote Link to comment
dattoboy70 Posted February 19, 2013 Report Share Posted February 19, 2013 i replaced my motor mount today because this happened Quote Link to comment
justplainjoe Posted February 21, 2013 Report Share Posted February 21, 2013 Got the carbs all rebuilt, put back together, ready for a test drive this morning.......and this happened........................ :frantics: :frantics: :frantics: snownami....stupid kansas! :mad: Quote Link to comment
demo243 Posted February 22, 2013 Report Share Posted February 22, 2013 Got my tach working... for the second time in two days... and got my speedo working- Wahoo currently all my gauges in the cluster work!!! although not all the back lights do... Quote Link to comment
dattoboy70 Posted February 22, 2013 Report Share Posted February 22, 2013 Got my carb jetted correctly and running smooth last night Quote Link to comment
r0p0doe Posted February 23, 2013 Report Share Posted February 23, 2013 Friday I got the radiator cleaned out and my carbs rebuilt, and soe.t the rest of the day cleaning water components for the motor so they can be installed today along with everything else for the motor. Got a few shops to run around to for parts today then It's assembly time :) Quote Link to comment
Tristin Posted February 23, 2013 Report Share Posted February 23, 2013 I've been fixing electrical shit all day. This is like the 3rd meet I've missed because of it... I need to not the the car sit fit extended periods until all these gremlins are worked out. Quote Link to comment
rusty12ver Posted February 25, 2013 Report Share Posted February 25, 2013 Bought a new 80" speedo cable, hope it the right length, can't wait to get a Working speedo again. Will see if it is accurate or not in speed. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.