Mesh-71 Posted July 8, 2009 Report Share Posted July 8, 2009 I am tired of the guys in the trucks section having all the fun, So I decided to start a thread here for the dimer's Today I tore down a su dual choke cable and rebuilt it with all new cables and housings, installed it in my dime and it works great! :D Now come on, I know somebody else did something to their 510, so lets here it.:lol: 4 Quote Link to comment
SIXTY-NINE-DIME Posted July 8, 2009 Report Share Posted July 8, 2009 haha well i took mine to franks work and washed it, put oil in it, turned the idol up a tad, put new spark plugs in... and drove that bitch! =] 2 Quote Link to comment
bonvo Posted July 8, 2009 Report Share Posted July 8, 2009 well mine isnt a 510 but it is a bluebird so can i post here? Quote Link to comment
WagDatto Posted July 8, 2009 Report Share Posted July 8, 2009 I did a lot "today," though some of it took place a few days ago. Here's a link to the latest update in my build thread. Let me know what you think of the paint! http://forum.ratsun.net/showpost.php?p=179993&postcount=154 1 Quote Link to comment
Mesh-71 Posted July 8, 2009 Author Report Share Posted July 8, 2009 well mine isnt a 510 but it is a bluebird so can i post here? Well technically I said What did you do to your "Dime" and it is a 610, so sure :D:D Quote Link to comment
bonvo Posted July 8, 2009 Report Share Posted July 8, 2009 woot :D well today i hand polised my 14x8 slot mags that was a bitch but they look bad ass :D 1 Quote Link to comment
Mesh-71 Posted July 8, 2009 Author Report Share Posted July 8, 2009 woot :D well today i hand polised my 14x8 slot mags that was a bitch but they look bad ass :D Yeah, hand polishing wheels really takes it out of you! I had to do that to mine as well, not my most favorite thing to do, thats for sure.:D Quote Link to comment
hang_510 Posted July 8, 2009 Report Share Posted July 8, 2009 ... turned the idol up a tad, ... and drove that bitch! =] frank is quite the idol ;) i bought lots of oil for the sedan :lol: so i could take it out for a mounatain romp this sat! for the goon, i now have the motor in MY garage. finishing pieces being installed and setting up the cam. the FI system should be here next week :D and if staring counts, i did that too :blink: 1 Quote Link to comment
zhiguli510 Posted July 8, 2009 Report Share Posted July 8, 2009 I pulled my non working high beams off, and replaced them with some chicken wire stuffed between head light rings. Now there is a little air circulation in there :D Quote Link to comment
qwik510 Posted July 8, 2009 Report Share Posted July 8, 2009 I am tired of the guys in the trucks section having all the fun, So I decided to start a thread here for the dimer's Today I tore down a su dual choke cable and rebuilt it with all new cables and housings, installed it in my dime and it works great! :D Now come on, I know somebody else did something to their 510, so lets here it.:lol: Any pics? I want to see how nicely it turned out. 1 Quote Link to comment
philcas1987 Posted July 8, 2009 Report Share Posted July 8, 2009 Today I kicked for being stupid. Yesterday I put my foglight grill on. I just need to finish polishing the foglight housings and find a sss grill badge. Quote Link to comment
BoostinBen Posted July 8, 2009 Report Share Posted July 8, 2009 Today I got a new hood trim in the mail and stripped the black off of my eybrow trim and bottom bar to match my new chrome grill. and polished em up a bit. now im at work ... :mad: .....but Tonight im either going to slap in my new b&m short shifter or start working on swapping out my rear end for the r180 lsd i got sitting here. Quote Link to comment
yellowdatsun Posted July 8, 2009 Report Share Posted July 8, 2009 Sanded my hood, doors, and trunk lid. Will try to paint them this afternoon. Quote Link to comment
datsunaholic Posted July 8, 2009 Report Share Posted July 8, 2009 Well, on Sunday I finally swapped rear hatches. I only bought the "better" hatch about 18 months or so ago. Best part- no more crappy aftermarket defroster wires to look at. Swapping hatches followed the 4th of July project of getting the thing to idle again- it still has a Hitachi, and the idle circuit plugged up. Just took the idle cut solenoid out and blasted the port with 100PSI air. It idles now. Now I just need to get the gauges working (the temp and fuel gauges read 2X correct, peg out at halfway- only when it's over 60 degrees) and bleed the rear brakes. Then it'll be driveable again. Ugly, but driveable. Oh, and I finally got the 4th hubcap put on. Quote Link to comment
510six Posted July 8, 2009 Report Share Posted July 8, 2009 Bent the line for the nitrous purge and rerouted the nitrous feed line to give enough room to make it to the solenoids. Replaced part of the turbo drain line back to the pan and managed to crossthread one of the bolts, got lucky having a 8mm x1.25 tap and die to repair the threads and damaged bolt. Drove about three blocks and had the gasoline fuel pump die while at an intersection , 45 min. and AAA tow truck later found a bad fuel pump relay and broken electrical conector. Quote Link to comment
Mesh-71 Posted July 8, 2009 Author Report Share Posted July 8, 2009 Any pics? I want to see how nicely it turned out. I knew that I should be taking pics, but didn't I will pop it out of the dash and snap a pic of that end, I used bike brake cables and housings, fit like a glove, and works real smooth. Quote Link to comment
denveratsun Posted July 8, 2009 Report Share Posted July 8, 2009 Hey man...great job robbing this thread from the truck section...after it was robbed by a Datsun guy from a VW site!:D Haha...I will have a 510 someday and when I do...i will do something to it...and after that happens, I will post it all up in this hizzie!:cool: 1 Quote Link to comment
ichorid Posted July 8, 2009 Report Share Posted July 8, 2009 (edited) I put a ratsun sticker on mine. last friday I scrubbed down my z rims though and polished em up. They are not so shiny now though. just bright white. Shine to come. you can see somewhat how shiny they are now though. also realizing that I should have cleaned the glass. I think I just wasted this sticker. Edited July 8, 2009 by ichorid 1 Quote Link to comment
Mesh-71 Posted July 9, 2009 Author Report Share Posted July 9, 2009 I installed an electric fan,and sync'ed the su's so that is some good forward progress, but then I figured out that my lights are not working, damn.... at least I have something else to do right? (Not like I really needed to add anything else to my arm length to-do list though) :blink: 1 Quote Link to comment
bmxanddie Posted July 10, 2009 Report Share Posted July 10, 2009 I put a ratsun sticker on mine. last friday I scrubbed down my z rims though and polished em up. They are not so shiny now though. just bright white. Shine to come. you can see somewhat how shiny they are now though. also realizing that I should have cleaned the glass. I think I just wasted this sticker. dont forget to peel that plastic off the sticker 1 Quote Link to comment
benzo Posted July 10, 2009 Report Share Posted July 10, 2009 started it. have not driven it a week 2 Quote Link to comment
chebetio510 Posted July 10, 2009 Report Share Posted July 10, 2009 changed the voltage regulator. installed new battery.. and wired in a new amp for stereo :D 1 Quote Link to comment
djlotus Posted July 10, 2009 Report Share Posted July 10, 2009 Finished plugging everything into the KA. Cranked it over for shits and giggles. 1 Quote Link to comment
ichorid Posted July 11, 2009 Report Share Posted July 11, 2009 this (got the hood on) AND! we changed the oil, changed the diff gear oil, replaced a ton of bolts, painted the front face to get a feel for how its going to look all black. 1 Quote Link to comment
thisisastickup Posted July 11, 2009 Report Share Posted July 11, 2009 looked at it, thought about how much fun it's going to be after i add a ka. i'm driving it to see bruno later, that'll be fun. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.