Draker Posted September 27, 2016 Report Share Posted September 27, 2016 I do that all the time. Quote Link to comment
fisch Posted September 27, 2016 Report Share Posted September 27, 2016 This is what I did. I plasti-coated CHapman's beat up miss-matched blue airdam to a nice graphite color. First time using any plasticoat type stuff. I can see why folks like it! Goes on so well. THis spook is beat to hell so it didn't have to be pretty, but it is a heck of a lot prettier than it was. Also installed some fog lights I had around. And I had a white color pencil in my hand so I doodled. Might be kinda fun to treat it like a chalk board. Remove and redraw whatever I am feeling. 5 Quote Link to comment
edekalil Posted September 27, 2016 Report Share Posted September 27, 2016 this is what i did. walked into garage. walked to the trunk area. sat on my scoot seat. stared into the the trunk area. walked out of garage. I know that. Quote Link to comment
edekalil Posted September 27, 2016 Report Share Posted September 27, 2016 This is what I did. I plasti-coated CHapman's beat up miss-matched blue airdam to a nice graphite color. First time using any plasticoat type stuff. I can see why folks like it! Goes on so well. THis spook is beat to hell so it didn't have to be pretty, but it is a heck of a lot prettier than it was. Also installed some fog lights I had around. And I had a white color pencil in my hand so I doodled. Might be kinda fun to treat it like a chalk board. Remove and redraw whatever I am feeling. Cool. Quote Link to comment
edekalil Posted October 2, 2016 Report Share Posted October 2, 2016 Got a friend here taking down my awning so the other people up the road can put up a new one. Been waiting for that for a while. So no work on the cars today I figure. I might get something done just have to see. Quote Link to comment
edekalil Posted October 2, 2016 Report Share Posted October 2, 2016 Couldn't do this. Because my friend helped me do this. Had to remove the awning while the help was offered. But I did find a nice one of these, the one on the bottom. Gotta find the other side then put them on the goon. O and sorry guys and gals I'm pulling for the Saints today. 1 Quote Link to comment
KoHeartsGPA Posted October 3, 2016 Report Share Posted October 3, 2016 Started tearing apart my L20b to replace head gasket.... Valve cover showing signs of coolant already mixing with oil. All head componenents appear clean and undamaged. You can see on the header that cylinders #1 and #2 were burning coolant. I also found heavy oil residue in the intake of #1 and #2, i suspect valve guides are shot. #3 and #4 look clean. Tuesday i should receive the timing chain wedge, got it at amazon for just under $13., sometime next week i should get the Fel-Pro head gasket kit, ill be pulling the head next weekend and sending it out for check, if its good then go ahead with the rebuild and hopefully get her running by the end of this month :-) Quote Link to comment
Big_E-Dog Posted October 4, 2016 Report Share Posted October 4, 2016 just a bunch of small odd n' ends, the 2 lower front grill brackets, the front grill/valance support, intercooler ducting, bout it. Quote Link to comment
edekalil Posted October 4, 2016 Report Share Posted October 4, 2016 Fired up the goon and got it up to temp. 2 Quote Link to comment
edekalil Posted October 16, 2016 Report Share Posted October 16, 2016 Drove this one while my friend worked on my building. Cracked and warmed up this one. Also put on the light surrounds and grill. Quote Link to comment
Big_E-Dog Posted October 19, 2016 Report Share Posted October 19, 2016 why does that street look barren lol! Quote Link to comment
skyblue Posted October 19, 2016 Report Share Posted October 19, 2016 Warshed it 3 Quote Link to comment
datO))) Posted October 20, 2016 Report Share Posted October 20, 2016 New alternator. Chevy conversation with internal Voltage regulator Quote Link to comment
edekalil Posted October 24, 2016 Report Share Posted October 24, 2016 why does that street look barren lol! Not sure if your referring to the pic looking up hill from my building. It was Sundau and it gets pretty slow in the old downtown area that day. But did get to get some antifreeze in the goon and crank her up yesterday. To busy getting work done on the building right now to do much else. My plan when I retire is to drive nothing but my antique 510's each day and use the newer car for longer trips. The biggest issue will be which one will I drive today? If I get a few more then I can just rotate them one a day. Quote Link to comment
edekalil Posted October 24, 2016 Report Share Posted October 24, 2016 Warshed it Looking good, gotta do that to all mine. Quote Link to comment
hobospyder Posted October 24, 2016 Report Share Posted October 24, 2016 Not sure if your referring to the pic looking up hill from my building. It was Sundau and it gets pretty slow in the old downtown area that day. But did get to get some antifreeze in the goon and crank her up yesterday. To busy getting work done on the building right now to do much else. My plan when I retire is to drive nothing but my antique 510's each day and use the newer car for longer trips. The biggest issue will be which one will I drive today? If I get a few more then I can just rotate them one a day. I fully support this plan Quote Link to comment
edekalil Posted November 1, 2016 Report Share Posted November 1, 2016 Figured out I have no compression in the third cylinder on the motor in the goon. It had been rebuilt way back but after running it for a not too long time I had taken it out and it sat on the floor for a good while. So I guess I will have to pull the head to figure it out. I guess a valve is not seating good. I don't know if i solved the issue fully but I posted a video with some info and progress in the engine section. It seems to be working much better now. Here it is http://s338.photobucket.com/user/ekalil/media/510parts/9FEDB2ED-6866-457C-9F1B-76B5C058953B.mp4.html Quote Link to comment
edekalil Posted November 1, 2016 Report Share Posted November 1, 2016 I fully support this plan Thanks Quote Link to comment
r0p0doe Posted November 3, 2016 Report Share Posted November 3, 2016 Replaced the fuel pump Quote Link to comment
datO))) Posted November 15, 2016 Report Share Posted November 15, 2016 Finally got wipers. Rigged it up to operate on single speed but I think I figured out the proper wiring Sequence to operated the two speeds. Slow and slower. Almost think I should keep it At one speed and just figure out how to get it to park properly. My reason is , it seems faster on single speed. Simply put. It has power and ground. Quote Link to comment
edekalil Posted November 15, 2016 Report Share Posted November 15, 2016 Haven't had much time to do anything due to all the other things going on like getting work done on the building and fixing a few guitars for a few friends. But I did buy a few things for the Goon, not sure if or when I will get to use them. Gotta keep up with Tanker. 3 Quote Link to comment
4perrev Posted November 15, 2016 Report Share Posted November 15, 2016 Pre-colored for cool points!! Quote Link to comment
edekalil Posted November 20, 2016 Report Share Posted November 20, 2016 Been kinda busy lately with the building transformation. Trying to make plans for the Goon. Gotta find the backing plates for the front struts I had shortened and get inserts. And get that thing lowered. But I did get a couple of shift knobs for the Goon and the blue car all apart. 1 Quote Link to comment
Big_E-Dog Posted November 20, 2016 Report Share Posted November 20, 2016 put my order in for composite leaf springs. he say itl be about a 4 week wait. thats cool. gives me time to install the front swaybar im gonna get from futofab. Quote Link to comment
mrbigtanker Posted November 21, 2016 Report Share Posted November 21, 2016 Did you buy that building. And if so fuckin right on. 2 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.