Dguy210 Posted April 20, 2013 Report Share Posted April 20, 2013 He has another one in his photos, not sure if it is the same one though. They are not the same. One is on gravel, the other dirt, one is near a fence, the other in the middle of a yard. Also the lower valence on this one is damaged, while in the other pic it is intact. Quote Link to comment
Lordmodelbuilder Posted April 20, 2013 Report Share Posted April 20, 2013 Those 521's are from a while back. Probably gone by now. The 520 did have a dash. I have it now. Brad Quote Link to comment
510Craven Posted April 20, 2013 Report Share Posted April 20, 2013 Stockton ca picknpull Two 620's one mint condition second looks like it rolled four or 5 times Few 720's at least 1 4x4 and a s30 but couldn't find the z Listed as a 75 but it was a 78 I believe. Barely any dings or dents. Custom paint with custom camper had some chrome flairs and wire wheels Nice bumper One panel plus seat but had buck rip on pass And because everyone around here likes a rear end :) Quote Link to comment
Eagle_Adam Posted April 22, 2013 Report Share Posted April 22, 2013 damn!! do want camper shell Quote Link to comment
datsunaholic Posted April 22, 2013 Report Share Posted April 22, 2013 Um, that alternator looks like a stock Hitachi and there's no signs of A/C anywhere. That's just the smog pump hoses. Quote Link to comment
510Craven Posted April 23, 2013 Report Share Posted April 23, 2013 Um, that alternator looks like a stock Hitachi and there's no signs of A/C anywhere. That's just the smog pump hoses. My bad sorry for giving false info just deleted it. None of the alternators I've been thru had that green around the casing except my saturn swap and it looked like it was hitting the water outlet neck so I jumped to conclusion. And also never seen another belt ran off the motor a L motor so jumped again. It's been edited thanks Quote Link to comment
Lordmodelbuilder Posted April 23, 2013 Report Share Posted April 23, 2013 Saw this 1968 521 at the Pick A Part located at 2025 S. MILLIKEN AVE.ONTARIO, CALIF. 91761. The truck had a J13 engine in it. Quote Link to comment
king bee66 Posted April 23, 2013 Report Share Posted April 23, 2013 not a datsun but its the first time ive seen a rotory in a junkyard, it looked like someone clamped the hood down, maybe to keep it covered, who knows. Quote Link to comment
Rocket Dog Posted April 23, 2013 Report Share Posted April 23, 2013 Saw this 1968 521 at the Pick A Part located at 2025 S. MILLIKEN AVE. ONTARIO, CALIF. 91761. The truck had a J13 engine in it. Is anybody able to snag those tail lights for me? Quote Link to comment
DREWSDIME Posted April 24, 2013 Report Share Posted April 24, 2013 Is anybody able to snag those tail lights for me? I might be going to that yard this week if they are still there I can grab them. I have already got a few parts from that truck Quote Link to comment
Rocket Dog Posted April 24, 2013 Report Share Posted April 24, 2013 I might be going to that yard this week if they are still there I can grab them. I have already got a few parts from that truck Awesome. I'm planning to head down there Sat morning, unless you're able to snag them first. How do they come off? Unscrew, cutting? Quote Link to comment
DREWSDIME Posted April 24, 2013 Report Share Posted April 24, 2013 I'm not sure how they come off, I'm pretty sure they are bolted? Can't you look at one of your trucks and find out? I can leave lights if your planning on going windshield in the truck has bubbles Quote Link to comment
Rocket Dog Posted April 24, 2013 Report Share Posted April 24, 2013 My trucks are from 72 and had the wider US market Tail lights. I did install "Thai tail lights" to get a JDM look (but missed the mark still). If the brackets are welded to the truck, I'm probably better off removing the tail lights and fabricating my own brackets. I'm planning to hit a Daiso store and snag some Korean BBQ also, so the pick and pull was one stop of many this weekend. If you are able to snag the tail lights only, I'd appreciate that. Quote Link to comment
wayno Posted April 25, 2013 Report Share Posted April 25, 2013 My 1966 520 brackets are spot welded in, but I believe it would be a pain in the ass to drill them out, so I suspect the 68 521s brackets will be spot welded in also. Quote Link to comment
Dvs-1 Posted April 25, 2013 Report Share Posted April 25, 2013 Hey guy I just joined this forum I'm trying to restore a 1972 datsun wagon and I need the drivers door can't find it anywhere there is a place in California salvage yard that has one but have to bid on it and then pay 1,600 to ship it down just too much,,,,,can anybody help! Quote Link to comment
Dvs-1 Posted April 25, 2013 Report Share Posted April 25, 2013 Hey guy I just joined this forum I'm trying to restore a 1972 datsun wagon and I need the drivers door can't find it anywhere there is a place in California salvage yard that has one but have to bid on it and then pay 1,600 to ship it down just too much,,,,,can anybody help! Quote Link to comment
carterb Posted April 27, 2013 Report Share Posted April 27, 2013 Just got back from a job in Japan. There was a junkyard/holding lot next to where we parked every morning. Skyline inside... Car had light front end damage, you could see the hood was crumpled just a little, and the left front wheel was a spare. 1 Quote Link to comment
tdaaj Posted April 28, 2013 Report Share Posted April 28, 2013 Saw this 1968 521 at the Pick A Part located at 2025 S. MILLIKEN AVE. ONTARIO, CALIF. 91761. The truck had a J13 engine in it. How my h would you charge me to pull that tailgate and ship it to me? Quote Link to comment
DREWSDIME Posted April 28, 2013 Report Share Posted April 28, 2013 I could get the tailgate if no one else does, that yard has a price list on website but it needs to be updated prices went up at beg of year. I think tailgate is like $50 plus whatever shipping would be plus few dollar for gas Quote Link to comment
tdaaj Posted April 28, 2013 Report Share Posted April 28, 2013 In less you know of another factory blue tail gate, I'm interested. Quote Link to comment
deans510 Posted April 29, 2013 Report Share Posted April 29, 2013 '73 620 & 280Z at McHughs in Concord,Ca Dean deans510@gmail.com Quote Link to comment
king bee66 Posted April 29, 2013 Report Share Posted April 29, 2013 Just got back from a job in Japan. There was a junkyard/holding lot next to where we parked every morning. Skyline inside... judging by the chalk lines it looks like it was waiting on some body work, pretty cool though Quote Link to comment
themadpants Posted April 29, 2013 Report Share Posted April 29, 2013 Anybody checked out this Goon in Merced, CA? http://row52.com/Vehicle/Index/PL510803611 Been there two months, so who knows what is left.. Quote Link to comment
Rocket Dog Posted April 30, 2013 Report Share Posted April 30, 2013 '73 620 & 280Z at McHughs in Concord,Ca Dean deans510@gmail.com Good lord, I used to hit McHughs back when I was in high school, can't believe they're still there. Quote Link to comment
jvb5577 Posted April 30, 2013 Report Share Posted April 30, 2013 '73 620 & 280Z at McHughs in Concord,Ca Dean deans510@gmail.com Not much on that 620, took a look today. Didn't get a picture but there is a L16 block with a A87. Torn up bench seat. Exhaust manifold, the 4-1. Wanted the stock wheels but there was only one wheel. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.