Jump to content

deans510

Members
  • Content Count

    228
  • Joined

  • Last visited

Everything posted by deans510

  1. The intake assembly manifold is for a KA24 12 Valve head.  I have a couple spare of those heads that  will work on a Z24 block too.

     

    I couldn't figure out how to edit the original ad to add this info.

     

    Dean

    1. datzenmike

      datzenmike

      How about starting another and I'll get rid of this one. It's marked completed anyway. This is a problem on this forum. People are always hitting the completed button when they are finished making the ad but this closes it. .

    2. deans510

      deans510

      Thanks Mike, I'll do that, if I can figure out how to delete the original one.

      Dean

  2. Time Left: 2 days and 4 hours

    • WANTED
    • USED

    Anyone have on of these? I have a spare engine that had a cracked one & need one to complete it. Dean

    NO VALUE SPECIFIED

  3. Thanks Mike, I'm using the fiber disc from the D21 assembly but the PP is way bigger in diameter than either FW. Dean
  4. I have 2 Fidanza FW's, 229501 for a Skyline R33 2.5L 93-98. The other one, NIS3-6621 143P that I've had in my 510 2dr btw '89 KA24 engine & stock KA 5 speed. Both of these are 240MM. The 229501 has a new friction disc on it, but I can't find a decent street clutch set for it. Most of the cheapest ones are in the $500 to $600 price range & go up to over $1500 for racing clutches. I would like to use a clutch set for around $250 or less. I've also come up dry for a new clutch set for the NIS3-6621 143P in that price range, any ideas? This is the FW I'm going to have to use. I'm going to sell the 229501 because there seems to be only racing high $$ clutches available for it. Someone with an R33 may find it good for them. Any help would be appreciated. Dean
  5. I need advice on what would be a good non racing, street only clutch set for a 240mm Fidanza FW I'd like to use with my newly rebuilt Rebello KA24 engine and trans. The KA24 engine and trans I'm replacing has a 225mm Fidanza FW clutch set. Dean gzentas510@outlook.com
  6. I have a stock PL510 temp gauge but its connected to a temp sensor (thermistor) on the KA24 engine swapped into my 2dr. I don't have any movement on the gauge with this combination. Anyone know what the correct sensor is for the stock PL510 temp gauge? Dean deans510@gmail.com
  7. The result of this brake problem was the removal of the small spring clip that's riveted to the back of the inside brake pad. The rivet caused the brake pad to skew sideways & bound up the rotor. Removed the rivet and all is good. As a side note, I acquired an extra pair of new speed bleeders for stock rear brake cylinders which I can't use because I have the complete 280ZX braking system on my 2dr. If any one would like these for the cost of S&H, please LMK at the email below. Dean deans510gmail.com
  8. I've tried to PM several members who have full mail boxes, most recently d-510, and others. Is there some way to contact these members other than PM??? Dean deans510@gmail.com
  9. Anyone know how to contact the above? Tried to send a message but he couldn't receive anything. Dean deans510@gmail.com
  10. Get the parking brake assembly too, including the handle, it's pedestal and bridle. Send me your email address and I'll send you my DQ article on the 280ZX brake upgrade. Dean
  11. Anyone know what the "P" connection is for. The unit I'm replacing dosen't have this connection. Any help is greatly appreciated, TIA Dean deans510@gmail.com
  12. Well, has anyone fabricated this tool? Or is there a special tool that Nissan offers to do this? Leaving them in is not much of a solution. Dean deans510@gmail.com
  13. I fabricated an adjustable rear spring mount that we used in '98 on the One Lap of America. We had to make this adjustment 2 times a day over a 9 day period at 9 different tracks. Unless you need to make frequent adjustments, this is not really worth while. I think I still have the article, and if you're interested, email me and I'll send it to you. Dean deans510@gmail.com
  14. On a '72 240Z, we need to remove the outboard rod (10" long) that the bushings fit on. This is the rod that is located nearest the brake backing plate. Need to buy or borrow the special tool that does this, ANYONE? Dean deans510@gmail.com DONE
  15. Don; Dan Heil, mackstwgn@gmail.com would be the guy to answer this. Dean
  16. I have a friend thats looking for the rear Maxima calipers, so if you score them and don't need them he probably be interested. His email is: don@armstrongbuilders.com Dean
  17. I have one I'll send you for the price of shipping from 94519. Dean deans510@gmail.com
  18. Corrected the pic for the sedan brackets. Dean
  19. I still have these brackets for sale, goon & sedan. I'm posting on this thread because the originator stated that he was out of stock and wasn't going to make any more.
  20. I have a couple, $50 plus S&H from 94519 . Dean deans510@gmail.com
  21. I have a penultimate rear xmember with 3" exhaust hole, $450 plus exchange and S&H from 94519. This is one I have fabricated.
  22. I recently acquired 2 of these and they look like some sort of block off plate. Anyone recognize them and what they fit???? Dean deans510@gmail.com
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.