RustedRails Posted August 28, 2021 Report Share Posted August 28, 2021 Those gauges are killer. Nice choice on the needles too. Usually see them in white. 1 Quote Link to comment
Tank. Posted September 12, 2021 Author Report Share Posted September 12, 2021 Worked a little on the master cylinder/booster setup. I’m changing to a 3-3/8” square booster bolt pattern (which is a very common booster pattern) and a 7” single diaphragm booster. And I got a really good deal on a wilwood master cylinder that I couldn’t pass up from a buddy. So I made an adapter plate out of some 2” flat stock, cut 4 pieces and welded them together. Now the idea is to weld the OEM booster bracket to the bracket I made. I’m not going to weld it until I put the steering column in so that I can get the booster exactly where it needs to be. So now I’m pretty much running a very common chevy pattern of which parts can be found anywhere for years to come. 5 Quote Link to comment
UnderControl Posted September 13, 2021 Report Share Posted September 13, 2021 Nice work. Making me feel like a slacker. 1 Quote Link to comment
]2eDeYe Posted September 13, 2021 Report Share Posted September 13, 2021 Upgrade! B) 1 Quote Link to comment
Tank. Posted September 14, 2021 Author Report Share Posted September 14, 2021 22 hours ago, UnderControl said: Nice work. Making me feel like a slacker. It took me 12 years to build my Z, I’m really trying to have the truck done a little faster…lol I’d like my son to learn how to drive a stick in it, he’s 5 now. 1 Quote Link to comment
Tank. Posted October 9, 2021 Author Report Share Posted October 9, 2021 (edited) Finished up the mechanics of the brakes, and made the accelerator cable. Just ordered a new rubber stopper for the brake light switch, but otherwise the brake setup is all good. For the accelerator cable, I took pieces from the original and modified the frontier cable to make one. So at the firewall to the pedal, it’s 620 parts. From the firewall out, it’s frontier. Turned out to be 27” tip to tip. I cut the frontier cable, and the made a new end for it. So I drilled down in a piece of wood about 3/8”, then melted lead in it with the cable. From there I shaped it to mimic the original so the oem clip still works for the 620 accelerator pedal. Works great! From there I made a pedal stop on the back of the oem pedal. Forgot to get a photo of that but I will at some point. Edited October 9, 2021 by Tank. 2 Quote Link to comment
Snohomishdatsun guy Posted October 10, 2021 Report Share Posted October 10, 2021 Great info. I'm following along behind you with a ka24 myself. At least I'm heading in that direction. Maybe..... I have the motor anyway. 3 Quote Link to comment
Tank. Posted October 10, 2021 Author Report Share Posted October 10, 2021 19 hours ago, Snohomishdatsun guy said: Great info. I'm following along behind you with a ka24 myself. At least I'm heading in that direction. Maybe..... I have the motor anyway. Nice, looks like a clean example to start with. Quote Link to comment
ShutterMeShort Posted November 8, 2021 Report Share Posted November 8, 2021 Well this escalated quickly! LOVE the front end set-up. Super clean work. Inspiration to get my project back on track... 2 Quote Link to comment
Tank. Posted November 9, 2021 Author Report Share Posted November 9, 2021 8 hours ago, ShutterMeShort said: Well this escalated quickly! LOVE the front end set-up. Super clean work. Inspiration to get my project back on track... Thanks, I’ve done a few other things recently and need to catch up here but hope to work on it more since it’s pretty much winter again. Quote Link to comment
Tank. Posted November 28, 2021 Author Report Share Posted November 28, 2021 Worked on the air cleaner a while back. I adapted an L20 intake/air cleaner to the truck intake. I still have a lot of cleanup to do on it and paint it but functionally its good to go. Why did I do this? I looks better than the plastic crap from the Frontier. I cut the center of the base nearly all the way around so I could level it to the engine, then welded it back. From there cut the cross piece that the top screws to and rotated it to work with the KA intake. Then I sectioned the air cleaner studs 1-7/8” so the L20 intake could bolt to it, drilled 2 holes and it now bolts down. Finished it by drilling a hole in the inner fender for the intake tube to go through. I plan on adding some sheetmetal in the inner fender to keep dirt/water/debris from flying up in there. A kind of scoop of sorts that goes down. 4 Quote Link to comment
Tank. Posted November 28, 2021 Author Report Share Posted November 28, 2021 (edited) As for the battery, I am relocating it below the bed. I got this plastic box and made a cage for it. The upper part will be welded to the bottom of the bed, the lower part bolts on so the battery box can be lowered out. I plan on using the old fuel filler area to mount jumper/charging studs. Edited November 28, 2021 by Tank. 3 Quote Link to comment
Tank. Posted November 28, 2021 Author Report Share Posted November 28, 2021 I put the bed back on to test fit and fabricate a few things. Dialed in the rear ride height as well. Seeing it like this helps keep me motivated. And for the new fuel filler, it’s in the bed. I already made a hinge for it, just need to weld it on. The fuel filler in the bed is a love it or hate it thing from what I’ve read. I still plan on using this for truck stuff but this was the best way to do it to keep the tank as high as possible. 4 Quote Link to comment
Stewiefied Posted November 30, 2021 Report Share Posted November 30, 2021 sooo good. Love it 1 Quote Link to comment
mklotz70 Posted February 12, 2022 Report Share Posted February 12, 2022 Tank....trying to contact you via msging on here. 2 Quote Link to comment
EDM620 Posted February 12, 2022 Report Share Posted February 12, 2022 Looks great Tank, you've put some slick touches into the build. Curious as to your gas fill location in the bed floor. Won't it be a PITA to fill and guess you won't actually be carrying anything? 1 Quote Link to comment
Tank. Posted February 12, 2022 Author Report Share Posted February 12, 2022 35 minutes ago, EDM620 said: Looks great Tank, you've put some slick touches into the build. Curious as to your gas fill location in the bed floor. Won't it be a PITA to fill and guess you won't actually be carrying anything? I do plan on using for light truck stuff so I’m still working out the details for the filler. It’s been a while since I have done anything to it but hopefully I’ll be able to put more time in soon. Quote Link to comment
EDM620 Posted February 14, 2022 Report Share Posted February 14, 2022 Making some assumptions here, tank is behind the axle so the fill isn't too far forward. I'm visioning a tunnel above bed floor with the actual filler acessed maybe via a door in the tailgate? Kinda like 70's GMs with the filler behind the license plate. Protect the fill line (and vent) from impact damage... Quote Link to comment
]2eDeYe Posted February 14, 2022 Report Share Posted February 14, 2022 That air cleaner is dope. Nice work. B) 2 Quote Link to comment
Tank. Posted September 7, 2022 Author Report Share Posted September 7, 2022 It’s been awhile! Starting digging in again on this thing and had the body sandblasted. I primed the bottom and sprayed 2 coats of raptor liner, I’ll use this in the bed as well. Then started cleaning/smoothing out the engine bay. 6 Quote Link to comment
EDM620 Posted September 7, 2022 Report Share Posted September 7, 2022 Oh how I wish my cab floor had been that solid! 1 Quote Link to comment
Tank. Posted September 7, 2022 Author Report Share Posted September 7, 2022 1 hour ago, EDM620 said: Oh how I wish my cab floor had been that solid! It surprised me when I first saw the truck. The only patch there isn't because of rust, it was simply to give a bit more room for the exhaust. Didn't have to do it, but it will be better with a little more clearance/breathability. Quote Link to comment
DARIN 510 Posted September 8, 2022 Report Share Posted September 8, 2022 That air cleaner is sick ! 2 Quote Link to comment
mklotz70 Posted September 9, 2022 Report Share Posted September 9, 2022 I like the air cleaner too!! :) I did a how-to for doing it with a weber. 2 Quote Link to comment
RustedRails Posted February 11 Report Share Posted February 11 Hey @Tank., how's it going? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.