]2eDeYe Posted November 4, 2017 Author Report Share Posted November 4, 2017 Hope everyone had a great Halloween. We sure did. :D Madsters school had a Trunk or Treat the Thursday before Halloween, so I decided to dress up the wagon as an undead hearse. Was a huge hit. We went to the punkin patch that Saturday, on the way out there was a leaf parked next to me and I couldn't help but see a resemblance :lol: Got some ok pics. :) Then it was parked on the front lawn as a Halloween decoration. :devil: 8 Quote Link to comment
Lockleaf Posted November 4, 2017 Report Share Posted November 4, 2017 That hearse idea is fantastic. 3 Quote Link to comment
q-tip Posted November 5, 2017 Report Share Posted November 5, 2017 What is this, a hearse for ants? Great idea and some fine execution. 1 Quote Link to comment
]2eDeYe Posted November 6, 2017 Author Report Share Posted November 6, 2017 Hearse for ants... lmao Thanks guys :) 1 Quote Link to comment
bananahamuck Posted December 1, 2017 Report Share Posted December 1, 2017 In case you are thinking of giving up on any emblems ,,,, i got a free very low mileage 94 dodge minivan that had a water leak.. I figured fix it,, put studded snows on it, and the boy could use it over at the university cuz if snow chains break it won't be no big thing to drive till safe to change. And as the Hanson brothers would say dents would make it look tougher. Long story short,, i got the engine all the fricking way down to a long block,,, BUT it's going back together now so ,,,,,,,,, soon ,,,, very soon. Or not ,, i don't know any more. :rofl: :rofl: 2 Quote Link to comment
]2eDeYe Posted December 1, 2017 Author Report Share Posted December 1, 2017 Haha, no rush. Just put this one away for the winter. :) Maybe you'll have them by Canby? :lol: 1 Quote Link to comment
bananahamuck Posted January 18, 2018 Report Share Posted January 18, 2018 . . 4 Quote Link to comment
]2eDeYe Posted January 18, 2018 Author Report Share Posted January 18, 2018 Right on, hoping to make it to the thing on the 20th. Not sure if I will have a Datsun ready by then though. :lol: 2 Quote Link to comment
hobospyder Posted January 18, 2018 Report Share Posted January 18, 2018 Shit if I go it'll be in a chevy 2 Quote Link to comment
]2eDeYe Posted June 3, 2018 Author Report Share Posted June 3, 2018 It's that time of year again. :D 5 Quote Link to comment
Charlie69 Posted June 4, 2018 Report Share Posted June 4, 2018 I love the 411 goons so much I used the the gauge cluster black plastic face in my 520 gauge cluster. Yes OEM NOS speedometer!!! That cost more than the truck! LOL 6 Quote Link to comment
]2eDeYe Posted June 5, 2018 Author Report Share Posted June 5, 2018 Well, the grand daughter isn't making the trip with us this year. Going to drive the red truck instead and haul ass. :lol: This will still be getting some attention though. 2 Quote Link to comment
]2eDeYe Posted June 25, 2018 Author Report Share Posted June 25, 2018 Thanks Naners for ze stinking badges. :lol: They fit real nice. :)Time to address the mess in the headliner. It wasn't as bad as I thought it would be, but I did find a new mascot.The rest of these pics are pretty much for reference.Came out in mostly one piece.Roof looks pretty good other than the one rusty spot from above the nest. :sick: I could really use the long drivers side trim piece, it's the only piece that isn't salvageable. I would think it is the same piece in the sedans? 2 Quote Link to comment
bananahamuck Posted June 26, 2018 Report Share Posted June 26, 2018 Got a measurement ? Is it the two middle pieces? I could whip one off if anyone's coming down to Teds cruise i could send it up North with them. most of my parts cars all have the trim around roof i think. 1 Quote Link to comment
]2eDeYe Posted June 26, 2018 Author Report Share Posted June 26, 2018 Yep, the middle pieces. They have some pin clips that you can't see that hold them on after you remove the screws. I will get a pic. Not sure who's going on that run, I'd like to but I will either being doing the trim for our new floor or working on datsuns....or both. :lol: 2 Quote Link to comment
bananahamuck Posted September 6, 2018 Report Share Posted September 6, 2018 (edited) So when we went to Vancoober car show we saw this on a 510.. The owner of the car said it works great.. The story was that Byron (510 realm guy) made this, and actually is working on making more of these brackets .. Now i figure they would most likely,, definitely ,, probably not fit a 411... But and industrious guy,, that knows a guy,, that can cut a few brackets ,,, could probably see how a homemade version could be "cobbled" together over time.. Edited September 6, 2018 by bananahamuck 3 Quote Link to comment
ArchetypeDatsun Posted September 6, 2018 Report Share Posted September 6, 2018 That looks killer? 1 Quote Link to comment
]2eDeYe Posted September 6, 2018 Author Report Share Posted September 6, 2018 Very interesting. Will have to see how much room there is. I also saw recently that the Subaru Forester (I think it was) has a shorty master with plenty of volume. Still need to research that a bit. 2 Quote Link to comment
banzai510(hainz) Posted September 6, 2018 Report Share Posted September 6, 2018 get the short Mikuni intake and you dont have to worry about it 1 Quote Link to comment
]2eDeYe Posted September 6, 2018 Author Report Share Posted September 6, 2018 I am running the stock RL411 SU's and air cleaner, which make it difficult to upgrade the master cylinder from the single res to a dual res. The 510 has a much bigger engine bay lol. 1 Quote Link to comment
Lockleaf Posted September 7, 2018 Report Share Posted September 7, 2018 (edited) Check out Chevy Astros. They have that type sideways master cylinder in all of them. That would at least net you hardware. Edited September 9, 2018 by Lockleaf 2 Quote Link to comment
]2eDeYe Posted December 29, 2020 Author Report Share Posted December 29, 2020 https://youtu.be/bre_m-CBbWc Made a video on the latest trip to winter storage. 6 Quote Link to comment
Soundline Posted March 22, 2021 Report Share Posted March 22, 2021 1 hour ago, datzenmike said: What for??? Is it cancelled? Quote Link to comment
datzenmike Posted March 22, 2021 Report Share Posted March 22, 2021 2 or 3 years ago I'm afraid. Quote Link to comment
]2eDeYe Posted October 25, 2021 Author Report Share Posted October 25, 2021 Back out of storage for Halloween 🙂 2 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.