laotsu Posted September 3, 2014 Author Report Share Posted September 3, 2014 hmmmmm The Rutles, sort of a late Sixties Spinal Tap. Cool. Link to comment
flatcat19 Posted September 3, 2014 Report Share Posted September 3, 2014 wont fit in front of rad You, Sir, suck. How can you not get a cooler to fit? Link to comment
laotsu Posted September 3, 2014 Author Report Share Posted September 3, 2014 You, Sir, suck. How can you not get a cooler to fit? Falsehood, those cars suck. 1 Link to comment
tr8er Posted September 3, 2014 Report Share Posted September 3, 2014 One must think outside the box. Link to comment
flatcat19 Posted September 3, 2014 Report Share Posted September 3, 2014 Many, many oil coolers to be made to fit your car. Weak attempt at being funny by posting the Boso thread. My point, be creative. Imaginative. You can do it. Link to comment
datzenmike Posted September 3, 2014 Report Share Posted September 3, 2014 wont fit in front of rad It sure will if you take that electric fan off. You won't need it. The fan is nice and all but that makes it mountable anywhere, even the bed of the truck. If under the hood it should take advantage of the rad fan. ....and get a plenum and a cold air pipe on those carbs and run it out in front of the rad. Maybe through the high beam to get cooler denser air and reduce pre ignition. 1 Link to comment
flatcat19 Posted September 3, 2014 Report Share Posted September 3, 2014 E-fan? I see the plastic blades of the stock fan. Do you have a pusher fan AND the clutched water pump fan? Remove one and you just found room for your oil cooler. Link to comment
datzenmike Posted September 3, 2014 Report Share Posted September 3, 2014 Pretty sure that an electric fan near the plug wires... Link to comment
flatcat19 Posted September 3, 2014 Report Share Posted September 3, 2014 I see what you're talking about now. I'm sorry but that just looks so ghetto. Buy the proper hoses and mount that shit out front. Uberkevin just started his LZ'd 521 for the first time. Cooler out front too. It can be done. Link to comment
bananahamuck Posted September 3, 2014 Report Share Posted September 3, 2014 In case anyone has a early mustang or early camaro and was going for a Can-Am look ,, Tdaaj brought these unilug Westerns by today .. He wants $700. and they are probably going to sell pretty fast., I'm not selling them or anything but i am in love with them :wub: Rare 15" most are 14" width is best described as whoa! 1 Link to comment
laotsu Posted September 3, 2014 Author Report Share Posted September 3, 2014 I'm not concerned aboot looks there's only aboot 2" between the rad and the front support. there is less than an inch between the clutch fa n and the rad. I will put the effort in and physically attempt it, but I am skeptical. Link to comment
laotsu Posted September 3, 2014 Author Report Share Posted September 3, 2014 I am finding no info on sidedraft cold air intakes. can somebody get a spoon for me? Link to comment
flatcat19 Posted September 3, 2014 Report Share Posted September 3, 2014 I am finding no info on sidedraft cold air intakes. can somebody get a spoon for me? Look up Skib's 620. Link to comment
bananahamuck Posted September 3, 2014 Report Share Posted September 3, 2014 skib had SUs Link to comment
flatcat19 Posted September 3, 2014 Report Share Posted September 3, 2014 skib had SUs with a cold air-ish setup on it. I saw it in person. I forgot who made the box for him. Link to comment
tr8er Posted September 3, 2014 Report Share Posted September 3, 2014 In case anyone has a early mustang or early camaro and was going for a Can-Am look ,, Tdaaj brought these unilug Westerns by today .. He wants $700. and they are probably going to sell pretty fast., I'm not selling them or anything but i am in love with them :wub: Rare 15" most are 14" width is best described as whoa! Someone was just asking for an ID on these rims. Where was that question posted? They didn't get the answer from what I saw. Link to comment
laotsu Posted September 3, 2014 Author Report Share Posted September 3, 2014 Erichwaslike fabbed a box for skibby Link to comment
flatcat19 Posted September 3, 2014 Report Share Posted September 3, 2014 Imitation is most sincere form of flattery. Get after it. 1 Link to comment
laotsu Posted September 3, 2014 Author Report Share Posted September 3, 2014 I'll be getting after a degree for the next two years. We'll see where the cooler fits. Link to comment
bananahamuck Posted September 3, 2014 Report Share Posted September 3, 2014 Someone was just asking for an ID on these rims. Where was that question posted? They didn't get the answer from what I saw. Maybe on Facebook (?) he sells a buncha stuff on there. I don't do facebook so i don't know for sure. Link to comment
bananahamuck Posted September 3, 2014 Report Share Posted September 3, 2014 Anybody else getting Invalid URL on videos tonight? Invalid URLThe requested URL "/embed/JRftXCiqfQ8?html5=1&fs=1", is invalid. Reference #9.a6440317.1409726857.82eed3b Never mind i deleted history/ cache and it fixed it. Link to comment
tr8er Posted September 3, 2014 Report Share Posted September 3, 2014 Maybe on Facebook (?) he sells a buncha stuff on there. I don't do facebook so i don't know for sure. Nah. Thought it was rims ( had and have) or car porn. But I checked... I think the pic was a dime or a B210. Ah, not sure. A few days ago. George Carlin just made a great evening.. Link to comment
datzenmike Posted September 3, 2014 Report Share Posted September 3, 2014 I am finding no info on sidedraft cold air intakes. can somebody get a spoon for me? Yeah that looks easy... on someone else's car. I guess a box with the air horns kept on for good flow Link to comment
RatVonDude Posted September 3, 2014 Report Share Posted September 3, 2014 <<<< that ain't piss Link to comment
Recommended Posts