Son_of_a_Datsun_Guy Posted May 4, 2014 Report Share Posted May 4, 2014 Rolling shots? Rolling shots. 1 Quote Link to comment
datsunfreak Posted May 4, 2014 Report Share Posted May 4, 2014 let me know, I'don't like to join in. Then why should he let you know? :rofl: 1 Quote Link to comment
Loren O Posted May 6, 2014 Report Share Posted May 6, 2014 The red fendered wagon front and center was moving to Eugene so we all stopped by to hang out. It was all planned on the ratsun Facebook page. Maybe the next time will be 5-10 or Canby... Sounds good. 1 Quote Link to comment
Loren O Posted May 6, 2014 Report Share Posted May 6, 2014 Then why should he let you know? :rofl: I was wondering why you said that, then I went & read what my post said. I don'the know how the word "don't" got in there. Probably the dam spell-check on my new phone. I haven't quite got the hang of using it yet. I'd defiantly like to join the group. Quote Link to comment
mrbigtanker Posted May 6, 2014 Report Share Posted May 6, 2014 Got my fender mirrors installed. I realize there's a love/hate for them but I dig em'! Are you in to rock climbing or baja 1000 , drop that wagon.lol Very nice clean car,but really drop it,do it now. 2 Quote Link to comment
mrbigtanker Posted May 6, 2014 Report Share Posted May 6, 2014 What size wheels you running. Quote Link to comment
mrbigtanker Posted May 7, 2014 Report Share Posted May 7, 2014 15x8 offset +0 So with a mild drop 8" wheels will fit.cool What size tire you running. Quote Link to comment
satcat808 Posted May 7, 2014 Report Share Posted May 7, 2014 Looking for a 70-72 Goon!! Anyone got any leads for a solid one for sale??? Thank you.... Quote Link to comment
frisco510 Posted May 8, 2014 Report Share Posted May 8, 2014 So with a mild drop 8" wheels will fit.cool What size tire you running. 195/50/15 it has a little stretch. tire rubs very little the falken brand is rubbing off lol. my front x member is about 4in off the ground 1 Quote Link to comment
greengoon Posted May 9, 2014 Report Share Posted May 9, 2014 It's been awhile since I've checked in, so now I'm back. 9 Quote Link to comment
datrod Posted May 9, 2014 Report Share Posted May 9, 2014 Looks really nice with the slots Dwane. Can you get it a little lower???? :rofl: 1 Quote Link to comment
greengoon Posted May 9, 2014 Report Share Posted May 9, 2014 Looks really nice with the slots Dwane. Can you get it a little lower???? :rofl: Not much :w00t:! It's stupid low actually. Frisco510 says his cross member is 4" off the ground. Mine is less than 2". It actually drives really well at this height but I can crank up the spring perches to go anywhere distant. The exhaust is what scrapes. Time to have it redone. Quote Link to comment
datrod Posted May 10, 2014 Report Share Posted May 10, 2014 Not much :w00t:! It's stupid low actually. Frisco510 says his cross member is 4" off the ground. Mine is less than 2". It actually drives really well at this height but I can crank up the spring perches to go anywhere distant. The exhaust is what scrapes. Time to have it redone. Just cut a hole and run the exhaust inside the cabin. :w00t: 2 Quote Link to comment
scooter stuff Posted May 10, 2014 Report Share Posted May 10, 2014 Not much :w00t:! It's stupid low actually. Frisco510 says his cross member is 4" off the ground. Mine is less than 2". It actually drives really well at this height but I can crank up the spring perches to go anywhere distant. The exhaust is what scrapes. Time to have it redone. Try using a remote exhaust. 2 Quote Link to comment
jrock4224 Posted May 13, 2014 Report Share Posted May 13, 2014 im exhaust tunneling mine duane .... well when i get back to it 1 Quote Link to comment
Just Joel Posted May 13, 2014 Report Share Posted May 13, 2014 Mines all above the frame rails with no tunneling... it is only 2" through the mid section though. Quote Link to comment
jrock4224 Posted May 14, 2014 Report Share Posted May 14, 2014 joels a show off lol 1 Quote Link to comment
greengoon Posted May 15, 2014 Report Share Posted May 15, 2014 Mines all above the frame rails with no tunneling... it is only 2" through the mid section though. I was wondering how small a diameter I could go with a stock engine. Do you have pictures of how it mounts, Joel? The front section near the tranny is the biggest concern. Quote Link to comment
reese Posted May 16, 2014 Report Share Posted May 16, 2014 New coilovers up front. Moar lower! See y'all at Canby! 11 Quote Link to comment
datsunfreak Posted May 16, 2014 Report Share Posted May 16, 2014 Damn... That's the color I wanted my wagon to be... :rofl: Looks good. :thumbup: 1 Quote Link to comment
Duncan Posted May 16, 2014 Report Share Posted May 16, 2014 Very nice goon! I'd like to see this one up close sometime. The paint and body work look very nice. Quote Link to comment
Just Joel Posted May 16, 2014 Report Share Posted May 16, 2014 I was wondering how small a diameter I could go with a stock engine. Do you have pictures of how it mounts, Joel? The front section near the tranny is the biggest concern. Sorry for the shit quality... low light and cellphone don't mix :mellow: All 2" through the mid section like I mentioned... then it goes to 2.25" through the muffler then eventually 2.5" at the tip. My attempt at exhaust tuning :P all mandrel bent to avoid restriction in the smaller section. I will say, she is a bit loud as I don't have room for a resonator anymore. 1 Quote Link to comment
derek72_521 Posted May 16, 2014 Report Share Posted May 16, 2014 New coilovers up front. Moar lower! See y'all at Canby! Love this goon!!! :thumbup: 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.