Jennifer Posted April 28, 2011 Report Share Posted April 28, 2011 andd soo.. when i got him him with gold shoes now with black now with a basket under the hood, nothing special and i like it as so :D seats...sweat monster in the summer time <_< not really doing much as i would like to.<_<. gotta fix some little nicks here and theree.. now with just pictures of what i fixed (not mmuchh) and questions :lol: changed the drums, don't know how that happenedd.. just found out and took a picture of it tonight ...doesn't look too good..the left side is finee. is this bolt supposed to be like this? or should i snug it up? it is currently sitting in the garage :( i have a problem with the steering.. when driving at high speeds on the freeway and turning, the steering slips and gives me an extra turn toward the way im turning and steerings just been looser than usual :unsure: buddy says to "check idler arm, to make sure all suspension bolts are tight and make sure tension rod is not broken", is there anything else that i need to check or be aware of? Quote Link to comment
INDY510 Posted April 28, 2011 Report Share Posted April 28, 2011 . T/c rods (tension control rods) can break ,,,, , and even if they're just loose the steering will feel loose .... . tighten the T/C rods a few turns for tighter steering ..... if that doesn't help,,, ,,try adjusting the steering box ..... .. . if there is excess "slack" in the steering Quote Link to comment
INDY510 Posted April 28, 2011 Report Share Posted April 28, 2011 . A few nice pics: Quote Link to comment
High5maxi! Posted April 28, 2011 Report Share Posted April 28, 2011 nicee 510 you got! cant wait to see what you have in store for him. ive been having the same problem on the freeway i think in my maxi, when i turn to the right some i feel a nudge in that direction. started happening after i replaced the drivers outter control arm. could possibly alignment? Quote Link to comment
gen4maxima536 Posted April 28, 2011 Report Share Posted April 28, 2011 The pipe plug in the block is probably tapered, if it isn't leaking i would leave it alone. Regarding the drums, just looks like they are bare steel/iron and the water trapped between the wheel and the drum was flowing out carrying rust with it, leaving the marks. Maybe clean them and hit them with some caliper paint. Quote Link to comment
Siqx20 Posted April 28, 2011 Report Share Posted April 28, 2011 Dayyyym! I really like! Check and make sure ur steering box is nice and snug. My 620 did the same. Ended up my steering gears werend meshed for shit. Meshed the gears a little tighter and problem went away Quote Link to comment
Rustina 510 Posted April 28, 2011 Report Share Posted April 28, 2011 Normally I don't like gold rims but I think they looked a little better than the black. They really go with the blue quite well. This is a great looking car, I hope you get the steering fixed asap Quote Link to comment
Jayden71 Posted April 28, 2011 Report Share Posted April 28, 2011 Theo looks good!! You are bringin him to Canby right??? :D Quote Link to comment
Jennifer Posted April 28, 2011 Author Report Share Posted April 28, 2011 Dayyyym! I really like! Check and make sure ur steering box is nice and snug. My 620 did the same. Ended up my steering gears werend meshed for shit. Meshed the gears a little tighter and problem went away Normally I don't like gold rims but I think they looked a little better than the black. They really go with the blue quite well. This is a great looking car, I hope you get the steering fixed asap Thanks :D Theo looks good!! You are bringin him to Canby right??? :D hellss yeah!! i hope so :lol: Quote Link to comment
Jennifer Posted April 28, 2011 Author Report Share Posted April 28, 2011 . T/c rods (tension control rods) can break ,,,, , and even if they're just loose the steering will feel loose .... . tighten the T/C rods a few turns for tighter steering ..... if that doesn't help,,, ,,try adjusting the steering box ..... .. . if there is excess "slack" in the steering thanks indy :rolleyes: Quote Link to comment
r0p0doe Posted April 28, 2011 Report Share Posted April 28, 2011 Nice dime, looks really good with gold rims Quote Link to comment
banzai510(hainz) Posted April 28, 2011 Report Share Posted April 28, 2011 http://www.importrp.com/ has bremo discs and brake drums and sell a few 510 items like stock clutches Daiken, Asco(Aisin).Koyo T/O bearings and a few other good stuff cheap. Quote Link to comment
Icehouse Posted April 28, 2011 Report Share Posted April 28, 2011 I had the same problem with my car, very scary! I don't like it when they try and kill me. My car had bad LCA bushings. But any wore bushings could cause that kinda feeling, same with a bad alignment. Quote Link to comment
Farmer Posted April 28, 2011 Report Share Posted April 28, 2011 The pipe plug in the block is probably tapered, if it isn't leaking i would leave it alone. Regarding the drums, just looks like they are bare steel/iron and the water trapped between the wheel and the drum was flowing out carrying rust with it, leaving the marks. Maybe clean them and hit them with some caliper paint. I thinks shes talking about that big chunk of missing brake drum. Larry Quote Link to comment
Jennifer Posted April 28, 2011 Author Report Share Posted April 28, 2011 I thinks shes talking about that big chunk of missing brake drum. Larry hahahh yeah Quote Link to comment
Jennifer Posted April 28, 2011 Author Report Share Posted April 28, 2011 I had the same problem with my car, very scary! I don't like it when they try and kill me. My car had bad LCA bushings. But any wore bushings could cause that kinda feeling, same with a bad alignment. :crying: scary.. Quote Link to comment
gen4maxima536 Posted April 28, 2011 Report Share Posted April 28, 2011 I thinks shes talking about that big chunk of missing brake drum. Larry Woah, didn't notice. Good eye Quote Link to comment
Rustina 510 Posted April 28, 2011 Report Share Posted April 28, 2011 I have the drums from my car that I wont be using, if you pay shipping they are yours Quote Link to comment
Jennifer Posted April 29, 2011 Author Report Share Posted April 29, 2011 I have the drums from my car that I wont be using, if you pay shipping they are yours aww thanks buddy :blush: but ive already changed them :) Quote Link to comment
the510keeper Posted April 29, 2011 Report Share Posted April 29, 2011 Looks good Jen, Get Theo road ready baby, we r heading out. Canby is cumming quick, squirt squirt. Quote Link to comment
Jennifer Posted April 29, 2011 Author Report Share Posted April 29, 2011 Looks good Jen, Get Theo road ready baby, we r heading out. Canby is cumming quick, squirt squirt. ahhh you got me hahah :lol: im super excitedd!! Quote Link to comment
NWOleman Posted May 1, 2011 Report Share Posted May 1, 2011 Nice to see you started your build thread!!! i like it, it's already a sweet dime! get that steering problem figured out. i had a 710 goon that would pitch me al over hell while driving it so after almost getn in a few head ons with it i parked it! it turns out i had a very badly bent frame. i doubt thats your problem tho. :D how bout some more inside oics! Quote Link to comment
Jennifer Posted May 1, 2011 Author Report Share Posted May 1, 2011 Nice to see you started your build thread!!! i like it, it's already a sweet dime! get that steering problem figured out. i had a 710 goon that would pitch me al over hell while driving it so after almost getn in a few head ons with it i parked it! it turns out i had a very badly bent frame. i doubt thats your problem tho. :D how bout some more inside oics! didn't really know what to take of hahah green steering wheel ..sparco seatbelts...roll cage :lol: Quote Link to comment
Siqx20 Posted May 1, 2011 Report Share Posted May 1, 2011 I think I may have messed myself :P Quote Link to comment
Jennifer Posted May 1, 2011 Author Report Share Posted May 1, 2011 change lug nuts :) (nothing too exciting...well a bit for me) my problem of steering..(unclear pics..) Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.