H5WAGON Posted July 8, 2011 Report Share Posted July 8, 2011 Working on the fuel system and getting ready to start wiring. How many gallons is the tank? Quote Link to comment
Jesse C. Posted July 8, 2011 Report Share Posted July 8, 2011 How many gallons is the tank? It holds 15 gallons and is made by RCI. I got it off ebay for less than $200 bucks! Quote Link to comment
elmerfudpucker Posted July 8, 2011 Report Share Posted July 8, 2011 Rims+tires! . Quote Link to comment
ohio510 Posted July 11, 2011 Report Share Posted July 11, 2011 gotz me some yellow high beams (thanks jon!!!!!!!!!!) Quote Link to comment
H5WAGON Posted July 16, 2011 Report Share Posted July 16, 2011 ha! I love that hinge-mounted licence plate. The idea of it flapping around makes me happy. I actually have mine tied to the bumper w/ coat-hanger wire, so it not only flaps, but it also slides left to right over time. That bracket you've got it probably a better option, but not nearly as fun. LOL after I did it. I wasn't really happy with it. Still needed a light, and I also liked the hinge..:P So I took it off and looked at it a bit......and thought, this might fit. This was after I trimmed the hinge...it was sticking out the sides behind the license plate. Used two 510 lic plate light gaskets, to make one flat one. I will repaint the cover.....But when the bumper is on you hardly see it. Its flapping in the wind again.....:D Quote Link to comment
APOD Posted July 29, 2011 Report Share Posted July 29, 2011 Before After Ordered some QA1 coilovers for the rear and I really got to get some 280zx struts for the front swap Quote Link to comment
mswit209 Posted July 31, 2011 Report Share Posted July 31, 2011 bought a complete running 92 240sx donor car for my swap.... for 700 Quote Link to comment
spitznoz Posted August 2, 2011 Report Share Posted August 2, 2011 peel and seal Quote Link to comment
Jesse C. Posted August 3, 2011 Report Share Posted August 3, 2011 Put on the 200SX front struts and wheels to roll it out so I could sweep the floor and could not help myself to a pic! Quote Link to comment
Dat510_Chris Posted August 6, 2011 Report Share Posted August 6, 2011 Replaced stock differential with Subaru LSD, changes the entire car. Quote Link to comment
Spades Posted August 8, 2011 Report Share Posted August 8, 2011 This weekend the wagon had most of the bodywork finished and was shot with a layer of primer. Today I installed the side turn outs on my dual exhaust. Quote Link to comment
dimer Posted August 8, 2011 Report Share Posted August 8, 2011 ok i mess this up tried to post the new wheels on the dime but im not smart enough to do it :blink: well i got the new wheels on and alternator in to then a nice drive :):):):):) ps the new wheels are my avatar pic Quote Link to comment
jdmdime Posted August 9, 2011 Report Share Posted August 9, 2011 mounted my megasquirt ecu and relay board ;) Quote Link to comment
71DIMER Posted August 11, 2011 Report Share Posted August 11, 2011 I was able to wash my car without having to push it to the parking lot corner! :) Quote Link to comment
H5WAGON Posted August 15, 2011 Report Share Posted August 15, 2011 MMMMM nice paint...:D Quote Link to comment
Shagy Posted August 15, 2011 Report Share Posted August 15, 2011 i picked up a pint of paint today that should be really really close to the OEM color, since no one can look up the OEM color code. Quote Link to comment
BayArea510 Posted August 19, 2011 Report Share Posted August 19, 2011 I reconfigured intercooler piping and MAF sensor to a blow thru set up. No more stalls or rich surges coming to a stop. Quote Link to comment
dennis Posted August 19, 2011 Report Share Posted August 19, 2011 pulled a bunch of dirty latex gloves out of the trunk and threw them away. Quote Link to comment
Shagy Posted August 26, 2011 Report Share Posted August 26, 2011 I painted 1/2 of my hood last weekend to see how the color would come out. Shitty job but it gives me an idea. I had the PSI turned up tOooo high on the gun (90)...I think it was supposed to be around 30-40....oops. Stripped.. Primer... Paint and clear...... Quote Link to comment
spitznoz Posted August 31, 2011 Report Share Posted August 31, 2011 dropped my rear Quote Link to comment
datsun510w Posted September 1, 2011 Report Share Posted September 1, 2011 installed new rims SSR MK3 15x8 in front 15x8.5 in rear future need to roll fenders more, and add coilovers to rear pictures should be up soon Quote Link to comment
ratsun71wagon Posted September 9, 2011 Report Share Posted September 9, 2011 Had a busy day today, finish putting the cooling system in, polish and cleaned my intake,carbs, valve cover, got the rest of my tranny bolts, bolted up my headers, intake and carbs not fun in the dark with a lamp and flashlight, tomorrow another busy day while waiting on parts Quote Link to comment
Mista510 Posted September 15, 2011 Report Share Posted September 15, 2011 Actually got it started...and discovered it leaking coolant from the water pump and another place that I haven't discovered yet Quote Link to comment
DISLEXICDIME Posted September 16, 2011 Report Share Posted September 16, 2011 What ever happened to mesh71's 510 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.