denveratsun Posted February 6, 2009 Report Share Posted February 6, 2009 come on man...HOW DID YOU DO IT?:D Looks great! Quote Link to comment
Bandit240 Posted February 6, 2009 Report Share Posted February 6, 2009 I was nice to my truck today. A few days ago i moved it out of the main shop and into the yard. Well they are calling for rain soon, so i put it in my little shop. Quote Link to comment
DatDoug Posted February 6, 2009 Report Share Posted February 6, 2009 Well i already have 3" blocks on the back. The trick to lowering it more is............... [/img] 300 pounds of Sakrete in the bed!:lol::fu: Maybe I should always roll like this?:blink: Quote Link to comment
Bandit240 Posted February 6, 2009 Report Share Posted February 6, 2009 I used to keep 500lbs of sand in the back of my F250. With an empty bed, that sucker would let go every time you stomped the pedal. Quote Link to comment
Justin Posted February 7, 2009 Report Share Posted February 7, 2009 (edited) 521- Pulled my tach apart, re-installed the screw that holds the faceplate, The ground is still soaked, so we'll see what gets done tomorrow- (Maybe if it rains more I'll do some wet-sanding on the 620):rolleyes: 620- Will mess with it when it's dry out, need to drop the oil pump and retard the ignition drive spindle, swap the transmissions/driveshafts and I'm keeping the Holley Edited February 7, 2009 by Justin Quote Link to comment
Roman Tasel Posted February 7, 2009 Report Share Posted February 7, 2009 I retimed my engine-it runs better.:lol: Quote Link to comment
airedout Posted February 7, 2009 Report Share Posted February 7, 2009 I aired up the pile and puched it outside today so i could play some ping pong, may work on it some tomarrow, may not. Kinda hard to get motivated in this crappy economy :mad: Quote Link to comment
73dat Posted February 7, 2009 Report Share Posted February 7, 2009 change the small steering wheel for a diff.style,inst.a billet clutch,brake,gas pedal,change the shifting knob.................:D Quote Link to comment
ImInked Posted February 7, 2009 Report Share Posted February 7, 2009 i'm gonna sand down one of my doors to bare metal and get it in primer. i have a couple of holes from the huge mirrors that were once on there that i need to patch. i'm gonna try an experiment on them to see if it works. i'll take pics just in case it does Quote Link to comment
pl521sss Posted February 7, 2009 Report Share Posted February 7, 2009 Charging the battery before it goes dead again Installed NOS defrost tubes Quote Link to comment
Madness Posted February 7, 2009 Author Report Share Posted February 7, 2009 where did you get those??? I need the rubber boot and the switch knob too. Quote Link to comment
Farmer Joe Posted February 7, 2009 Report Share Posted February 7, 2009 i lubed up my throttle linkage on the carb and the throttle cable. i put a quart of oil in it to. it leaks pretty bad. but now my gas pedal works sooooo easily now. it was starting to stick on me sometimes. so it needed a good lubin!! lol i was gonna wash it today since its like the 1st sunny warm day of the year, but i have family errands that came up. maybe tomorrow if the weather holds out. is like 45deg!!! its freakin hot outside lol!! Quote Link to comment
pl521sss Posted February 8, 2009 Report Share Posted February 8, 2009 where did you get those??? I need the rubber boot and the switch knob too. Ebay Tried ordering from Nissanparts.cc but suppose to be NLA I'm not sure Quote Link to comment
84TAVeRT Posted February 8, 2009 Report Share Posted February 8, 2009 i drove it from the back yard to the front... and then to the back again... but i worked on a bike all day... :) Quote Link to comment
nukeday Posted February 8, 2009 Report Share Posted February 8, 2009 Pondered... Picked up a hood and rear window. Printed out and highlighted some wiring diagrams. PB Blasted more fittings. Looked through my 'new' parts boxes a little bit. Borrowed a grinder, bought some cheap grinding disks. Took some pic's. Made a ratsun stencil for the hood. Quote Link to comment
ggzilla Posted February 8, 2009 Report Share Posted February 8, 2009 I decided I would drive it today. First time since November. The battery went wo-wo, wouldn't turn it fast enough to start. Tomorrow I might jump-start it. Quote Link to comment
lynchfourtwenty Posted February 9, 2009 Report Share Posted February 9, 2009 today i changed out the rear left tail light shit and the front turn signal shit too, got the parts from bagged datsun the other day :) Quote Link to comment
tdaaj Posted February 9, 2009 Report Share Posted February 9, 2009 put a canopy on and carpet in the bed so i can haul the dogs. Quote Link to comment
1fstdat Posted February 9, 2009 Report Share Posted February 9, 2009 Put a heater fan motor in that a member gave me its nice to be warm again, took the car cover off my camaro to find the winter was hard on it even under a cover, the interior was green and fuzzy and the paint some spots that had little bubbles on it looked like a rash, so sad. car covers dont always do good!! Quote Link to comment
nukeday Posted February 9, 2009 Report Share Posted February 9, 2009 Painted the first stage of my hood. PB Blasted and banged on 3 of my brake drums. Broke my deadblow hammer. Sorted through a box of wiring harnesses. Removed a rear window and gasket (late last night actually). Quote Link to comment
LAYEDOUTB2K Posted February 9, 2009 Report Share Posted February 9, 2009 picked up the new one and trailered it home. :D Quote Link to comment
sycloned916 Posted February 10, 2009 Report Share Posted February 10, 2009 Installed some kyb's in the rear (got from BarryA)and them me and my daughter went to got break them in. Quote Link to comment
nukeday Posted February 10, 2009 Report Share Posted February 10, 2009 Soldered in extension wiring for the fuse box and VR. Printed, drew on, and studied wiring diagrams. Painted and unmasked my hood. Quote Link to comment
LAYEDOUTB2K Posted February 10, 2009 Report Share Posted February 10, 2009 got the 720 in the gargage, pulled out the bench and carpet, and surveyed for rust. then i started mounting some subaru bucket seats. Quote Link to comment
denveratsun Posted February 10, 2009 Report Share Posted February 10, 2009 Took the 17 inch GMC rims off and put my stock 14s back on. Looks cool to me!:D Pulled some really nice brake and clutch pedal pads off a 1969 in the JY and installed them instantly! I pulled the grille, tailights too and some of those hard to find little rubber plugs that go in the hole in the door jamb between the hinges. Pulled the dipstick out and checked the oil. Need to change it. Castrol Syntech is not cheap...good thing it lasts so much longer!:cool: Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.