craZee Posted April 12, 2023 Author Report Share Posted April 12, 2023 Just changed out my rear shocks, as the seal had failed on one and it had leaked all the oil out. After letting the truck back down I realized that I only had about 1" of travel before hitting the bump stops. I could easily bottom it out by pushing down on the bed. I cut about an inch off of each stop and if I remember my trigonometry correctly, this doubles my travel! 🙂 It's hard now to press it down enough to hit the stops. Easy to cut more off if I need it. Hard to stick it back on..... 3 Quote Link to comment
Stoffregen Motorsports Posted April 13, 2023 Report Share Posted April 13, 2023 Glass pack mufflers sound weird on a Datsun. A regular old "turbo" muffler has a more correct for Datsun sound. And ditch the 1.5" exhaust... 1 Quote Link to comment
yenpit Posted April 13, 2023 Report Share Posted April 13, 2023 18 minutes ago, Stoffregen Motorsports said: Glass pack mufflers sound weird on a Datsun. A regular old "turbo" muffler has a more correct for Datsun sound. And ditch the 1.5" exhaust... I'm building a single exhaust stack for my 521 flatbed! I bought two of the internally baffled "glasspack style" mufflers, cut one end off both, will weld together to create a double length thus double # of baffles muffler. Also bought perforated sheet steel, will roll in to a heatshield around the muffler/stack. And of course, it will have a flapper on top! I think I bought a 2in exhaust tube kit to build the piping under the truck................. 3 Quote Link to comment
Crashtd420 Posted April 13, 2023 Report Share Posted April 13, 2023 41 minutes ago, yenpit said: I'm building a single exhaust stack for my 521 flatbed! I bought two of the internally baffled "glasspack style" mufflers, cut one end off both, will weld together to create a double length thus double # of baffles muffler. Also bought perforated sheet steel, will roll in to a heatshield around the muffler/stack. And of course, it will have a flapper on top! I think I bought a 2in exhaust tube kit to build the piping under the truck................. I guarantee you will ditch the flapper after a week... it was so damn annoying when I had it on mine.... 2inch pipes sound good on the datsun motors... 1 1 Quote Link to comment
yenpit Posted April 13, 2023 Report Share Posted April 13, 2023 2 hours ago, Crashtd420 said: I guarantee you will ditch the flapper after a week... it was so damn annoying when I had it on mine.... 2inch pipes sound good on the datsun motors... Ha, really!!?? 🤣 I don't like the tip turnouts, so figured a flapper was the way to go.............we get enough rain/snow here in Denver, that I won't leave it cut straight & open pointing up! Hmmmmmmmmm.............. 1 Quote Link to comment
iceman510 Posted April 13, 2023 Report Share Posted April 13, 2023 4 hours ago, yenpit said: I'm building a single exhaust stack for my 521 flatbed! I bought two of the internally baffled "glasspack style" mufflers, cut one end off both, will weld together to create a double length thus double # of baffles muffler. Also bought perforated sheet steel, will roll in to a heatshield around the muffler/stack. And of course, it will have a flapper on top! I think I bought a 2in exhaust tube kit to build the piping under the truck................. That's some real Taylortucky Michigan engineering right there. 😉 1 1 Quote Link to comment
yenpit Posted April 13, 2023 Report Share Posted April 13, 2023 9 minutes ago, iceman510 said: That's some real Taylortucky Michigan engineering right there. 😉 Well, I was in MI for 22 years, so............. 1 Quote Link to comment
iceman510 Posted April 13, 2023 Report Share Posted April 13, 2023 (edited) 20 minutes ago, yenpit said: Well, I was in MI for 22 years, so............. Sure thing. I just like to use that stereotypical phrase once in awhile since my cousin introduced me to it after I moved up here. Edited April 13, 2023 by iceman510 1 Quote Link to comment
craZee Posted April 13, 2023 Author Report Share Posted April 13, 2023 OK 620 brain trust. What is the best source for replacement ring and pinion gears for these differentials? Took my truck to a car show last night and the 3-mile leg on the freeway was unbearable. I have no idea how this truck got 108,000 miles on it with 4:88 gears in the back! Quote Link to comment
datzenmike Posted April 14, 2023 Report Share Posted April 14, 2023 Well you only have an L16 so I would go with stock 4.375 or 4.11 gears. If just commuting maybe 3.90. It's a salisbury style removable 3rd member so just unbolt the 'pumpkin' and swap. Easy peasy. For a 3.90 look at 720 trucks. The '73-'79 manuals and '74-'79 automatics all had 4.375. You will need the 20 tooth speedometer pinion sleeve from a '74-'79 AUTOMATIC to keep your speedometer accurate and useful. I don't believe the manual sleeves fit the automatic. 2 Quote Link to comment
Crashtd420 Posted April 14, 2023 Report Share Posted April 14, 2023 14 hours ago, iceman510 said: That's some real Taylortucky Michigan engineering right there. 😉 Sounds like I belong in Michigan with my truck too... 2 Quote Link to comment
Crashtd420 Posted April 14, 2023 Report Share Posted April 14, 2023 16 hours ago, yenpit said: Ha, really!!?? 🤣 I don't like the tip turnouts, so figured a flapper was the way to go.............we get enough rain/snow here in Denver, that I won't leave it cut straight & open pointing up! Hmmmmmmmmm.............. I went through a lot of the same thoughts... hit up my build thread of you have questions about what I did on my 521... dont wanna clutter this thread. 1 Quote Link to comment
Wildcat Walker Posted April 14, 2023 Report Share Posted April 14, 2023 Currently at my local yard, won't last long, these guus are crush happy. Quote Link to comment
craZee Posted April 14, 2023 Author Report Share Posted April 14, 2023 (edited) Hagerty Insurance rocks! I have been a happy customer for over 10-years, and they continue to surprise me with their customer service. When I first bought this truck I insured it for $10,000 with a whopping annual premium of $28/yr. I called yesterday to increase that to $15,000. The agent (always friendly people that I can understand!) said that $15,000 exceed their current "valuation tool", but that she would look on-line for recent sales. While I was on the phone with her, she found some comps from BaT, Mecum etc. that supported a $15,000 valuation and higher. Based on those findings, she was able to approve the increase and it cost me another $9 for the remainder of my annual policy. Kudos to Hagerty for giving their agents authority to look outside the box and keep customers happy! I wish we had more companies like that! Edited April 14, 2023 by craZee 3 Quote Link to comment
iceman510 Posted April 14, 2023 Report Share Posted April 14, 2023 Mileage limit per year? 1 Quote Link to comment
craZee Posted April 14, 2023 Author Report Share Posted April 14, 2023 22 minutes ago, iceman510 said: Mileage limit per year? I don't remember them even asking on this one. I only insure my collector cars with them, so I usually tell them 2,500/yr/vehicle. Mine also are always garaged, which may be a requirement as well. It's not a fit for all applications for sure. They insure race cars as well, which are covered everywhere except on the physical racetrack. My homeowners insurance will not cover any vehicle that has had a vin number so if my house burns down there is no coverage on any vehicles. They even have a special program where if you pay a little more each year (very little) if one of your cars gets totaled you get the totaled value paid out AND you get to keep the car! 1 Quote Link to comment
yenpit Posted April 14, 2023 Report Share Posted April 14, 2023 1 hour ago, craZee said: Hagerty Insurance rocks! I have been a happy customer for over 10-years, and they continue to surprise me with their customer service. When I first bought this truck I insured it for $10,000 with a whopping annual premium of $28/yr. I called yesterday to increase that to $15,000. The agent (always friendly people that I can understand!) said that $15,000 exceed their current "valuation tool", but that she would look on-line for recent sales. While I was on the phone with her, she found some comps from BaT, Mecum etc. that supported a $15,000 valuation and higher. Based on those findings, she was able to approve the increase and it cost me another $9 for the remainder of my annual policy. Kudos to Hagerty for giving their agents authority to look outside the box and keep customers happy! I wish we had more companies like that! I knew a couple employees when Hagerty was in Michigan, they moved here to Golden & we know some of the people directly involved! We've had a number of customer cars on display in their building showroom! Yes, good people! 😎 Quote Link to comment
yenpit Posted April 14, 2023 Report Share Posted April 14, 2023 1 hour ago, iceman510 said: Mileage limit per year? My Hagerty policy does have a mileage limit, but don't know what it is offhand............. Quote Link to comment
craZee Posted April 15, 2023 Author Report Share Posted April 15, 2023 A local cool car hangout the Garage Collective held a 70's flower power cars and coffee this morning. The 620 was well received! 6 Quote Link to comment
Stoffregen Motorsports Posted April 16, 2023 Report Share Posted April 16, 2023 Did you find a diff yet? Try car-part.com Quote Link to comment
KELMO Posted April 17, 2023 Report Share Posted April 17, 2023 Looks like a pretty upscale C&C. I like it. 1 Quote Link to comment
craZee Posted April 19, 2023 Author Report Share Posted April 19, 2023 Got my car err, truck to the muffler shop today. Out goes the 50-year-old 1.5" pipe that was hitting on the cross brace and a muffler with a loose baffle inside that sounded like a spray paint can. In went new 2" pipe with a 24" long Thrush glass pack. LOVE the new sound and especially the lack of rattles and knocks. Forgot to take a final picture before the truck hit the ground but will do so next time it is on my lift. 4 Quote Link to comment
craZee Posted April 19, 2023 Author Report Share Posted April 19, 2023 Fun project today. Through the buffing, and in some cases color sanding process, I lost parts of my pinstriping. I found a great local guy who has been striping since the 70's. Being a former Datsun truck owner, he instantly fell in love with the truck and was easily able to color match the existing striping and touch it up, while still leaving some patina. It really makes the truck pop! Awesome job Rob. You're the man! 6 Quote Link to comment
Crashtd420 Posted April 20, 2023 Report Share Posted April 20, 2023 Nice job finding that guy.... I cant imagine there are many left with that level of skill... Quote Link to comment
iceman510 Posted April 20, 2023 Report Share Posted April 20, 2023 16 hours ago, craZee said: Now that's a working man's toolbox! 4 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.