Home Built by Jeff Posted March 30, 2019 Author Report Share Posted March 30, 2019 In this episode I fail to fit new wheel studs, but I swap in the new fuel filler and some other bits. 1 Quote Link to comment
Tedman Posted March 30, 2019 Report Share Posted March 30, 2019 (edited) FYI- Factory Nissan wheel studs p/n 43222-50J00 are 9mm longer, if that'll be enough for your setup. Edited March 30, 2019 by Tedman Quote Link to comment
Home Built by Jeff Posted March 30, 2019 Author Report Share Posted March 30, 2019 The length is not the issue, it is more about the diameter of the knurl Quote Link to comment
datsunfreak Posted March 31, 2019 Report Share Posted March 31, 2019 2 hours ago, Home Built by Jeff said: The length is not the issue, it is more about the diameter of the knurl Yes, but the later studs fix both problems. 😁 As do these from ARP (part #100-7708), but they change the pitch to a more common 12x1.5 instead of the Subaru/Nissan only 12x1.25. https://www.ebay.com/itm/ARP-100-7708-Wheel-Studs-12mm-x-1-50-Late-Model-GM-Set-of-5-Camaro-Corvette/360751034942?epid=671575124&hash=item53fe6ff23e:g:63AAAOxyTkJSRHHc&frcectupt=true Quote Link to comment
Tedman Posted March 31, 2019 Report Share Posted March 31, 2019 4 hours ago, Home Built by Jeff said: The length is not the issue, it is more about the diameter of the knurl Yes, of course. My point is that there's a 9mm longer stud with the correct knurl diameter and thread pitch available over the counter at your local Nissan dealer. 1 Quote Link to comment
Home Built by Jeff Posted April 1, 2019 Author Report Share Posted April 1, 2019 On 3/31/2019 at 7:56 AM, Tedman said: FYI- Factory Nissan wheel studs p/n 43222-50J00 are 9mm longer, if that'll be enough for your setup. I already have 42mm studs on the rear, but they are too short. The ones on the front are around 36mm, but they still they still need another 10mm to get full engagement on the nuts. I am very tempted to just drill out the hubs so the studs I have fit. Quote Link to comment
BrothersGarage Posted April 2, 2019 Report Share Posted April 2, 2019 I did extended studs on my honda civic back in the day like this: and had open ended nuts from spoon sports on them. May want to just go overboard with it. Quote Link to comment
Home Built by Jeff Posted April 2, 2019 Author Report Share Posted April 2, 2019 54 minutes ago, BrothersGarage said: I did extended studs on my honda civic back in the day like this: and had open ended nuts from spoon sports on them. May want to just go overboard with it. I have sorted them in tonights episode. Some may not like how I did it, but I ended up drilling out the hubs to use the studs I have. Worked great. 1 Quote Link to comment
Home Built by Jeff Posted April 3, 2019 Author Report Share Posted April 3, 2019 In this episode I revisit replacing the wheel studs and fit the sway bar and bushings. 1 Quote Link to comment
Home Built by Jeff Posted April 6, 2019 Author Report Share Posted April 6, 2019 In this episode I fit a 123 distributor to the 680g to hopefully get it running properly once and for all. 1 Quote Link to comment
Home Built by Jeff Posted April 10, 2019 Author Report Share Posted April 10, 2019 In this episode I sort out my timing issues and tune the car using the colour tune. Quote Link to comment
Home Built by Jeff Posted April 13, 2019 Author Report Share Posted April 13, 2019 After 18 long months of tinkering in the garage, I finally get to drive the 680G. 5 Quote Link to comment
Farmer Posted April 16, 2019 Report Share Posted April 16, 2019 Engine sounds great. Nice and mean. Congrats 1 Quote Link to comment
BrothersGarage Posted April 16, 2019 Report Share Posted April 16, 2019 Wrapping up great! Going to miss watching this get tinkered with. 1 Quote Link to comment
Home Built by Jeff Posted April 17, 2019 Author Report Share Posted April 17, 2019 (edited) 11 hours ago, BrothersGarage said: Wrapping up great! Going to miss watching this get tinkered with. It is still not done yet, and even though the next project is not a Z, I think it will be worth watching 😉 Edited April 17, 2019 by Home Built by Jeff 1 Quote Link to comment
BrothersGarage Posted April 17, 2019 Report Share Posted April 17, 2019 1 hour ago, Home Built by Jeff said: It is still not done yet, and even though the next project is not a Z, I think it will be worth watching 😉 Nah, your channel has a subscriber. Your content you put out is not only quality, but you're not afraid to show your mistakes and show others how you get past problems you experience with your ride. Your content is very much appreciated in general. Thank you. 2 Quote Link to comment
hobospyder Posted April 17, 2019 Report Share Posted April 17, 2019 I wanna see you drive the Porsche, the lack of closure is bothering me The bug got "done" this is almost "done" the porsche has been lingering in limbo for so long. Next up is an alpha ain't it? 1 Quote Link to comment
Home Built by Jeff Posted April 17, 2019 Author Report Share Posted April 17, 2019 The 911 will be getting closure soon. Nobody wants it more than me. The Alfa is next and that should be a big one 😄 1 Quote Link to comment
hobospyder Posted April 17, 2019 Report Share Posted April 17, 2019 I remember the amount of rust. Been a while since I watched the video on the alfa. Sorry for misspelling 1 Quote Link to comment
Home Built by Jeff Posted April 18, 2019 Author Report Share Posted April 18, 2019 It is finally time to do something a bit more permanent about my spray booth. 1 Quote Link to comment
frank88 Posted April 21, 2019 Report Share Posted April 21, 2019 Been catching up recently, really enjoying the videos as usual. The colour scheme works so well. Congrats mate. Looking forward to the future content 1 Quote Link to comment
Aaron Datsun Posted April 21, 2019 Report Share Posted April 21, 2019 On 4/17/2019 at 2:59 AM, Home Built by Jeff said: The 911 will be getting closure soon. Nobody wants it more than me. The Alfa is next and that should be a big one 😄 I love the porsche, but I came on board with the Z and love it, glad you are pretty much there with it. Love the new paint booth. I am really excited for the Alfa 1 Quote Link to comment
Home Built by Jeff Posted May 1, 2019 Author Report Share Posted May 1, 2019 Many of you have been asking me what is happening and I finally have an update for you, and some info on where I am planning to go in the future. Quote Link to comment
hobospyder Posted May 1, 2019 Report Share Posted May 1, 2019 Already commented on YouTube but had to add, wo glad I chose to watch YouTube instead of Netflix tonight during lunch 1 Quote Link to comment
Home Built by Jeff Posted May 1, 2019 Author Report Share Posted May 1, 2019 9 hours ago, hobospyder said: Already commented on YouTube but had to add, wo glad I chose to watch YouTube instead of Netflix tonight during lunch Glad I can help keep you entertained 😉 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.