Janksun Posted February 24, 2016 Report Share Posted February 24, 2016 Thanks guys, Car can go 2.5 inches lower I would like to see 15s,with 50 series. Then decide. But I need to get the KA up an inch. Lower then this the oil pan wants to get smashed on everything Use 620 rubber mounts to get it higher. Quote Link to comment
S30Jay Posted February 24, 2016 Report Share Posted February 24, 2016 Creepy spider.... Quote Link to comment
the510keeper Posted March 7, 2016 Author Report Share Posted March 7, 2016 I don't normally use rubbers but when I do keeps the wind out, 3 Quote Link to comment
DaBlist Posted March 7, 2016 Report Share Posted March 7, 2016 Looking for 15 long champs, still deciding if I like the 185 60 14s. rides great. 14's :thumbup: Quote Link to comment
the510keeper Posted March 18, 2016 Author Report Share Posted March 18, 2016 15's from Japan, Thanks for the hook up Jimmy 15-7.5 rear and 15-7 front That's Don, long time Datsun friend for the photo bomb. We will putting a 4 door together for him soon. 4 Quote Link to comment
q-tip Posted March 18, 2016 Report Share Posted March 18, 2016 Ooooooo center caps.....you don't happen to have an extra do you? Quote Link to comment
the510keeper Posted April 10, 2016 Author Report Share Posted April 10, 2016 no extra caps Fronts fit good, set to the inside of the fender area a bit backs don't fit need a smaller tire 5 Quote Link to comment
mrbigtanker Posted April 10, 2016 Report Share Posted April 10, 2016 Looks good Quote Link to comment
kerleybird Posted April 10, 2016 Report Share Posted April 10, 2016 Fucking savage. Quote Link to comment
cleverusername Posted April 10, 2016 Report Share Posted April 10, 2016 Looks great man. Any chance you'd be willing to part with 2 of the Equips? Quote Link to comment
the510keeper Posted April 10, 2016 Author Report Share Posted April 10, 2016 The equips r sold. Quote Link to comment
Dattokai Posted April 10, 2016 Report Share Posted April 10, 2016 Though your name is ironic, I really hope you keep this 510. Quote Link to comment
the510keeper Posted April 17, 2016 Author Report Share Posted April 17, 2016 Though your name is ironic, I really hope you keep this 510. The510broker, didn't have a ring to it 2nd try 195-50-15 no fit 195-45-15 Went on a fun run with SacDatsuns and she rubbing in the ass, also the fronts fit great but needed to space them out 3mm. were hitting the calipers. 3 Quote Link to comment
Ranman72 Posted April 17, 2016 Report Share Posted April 17, 2016 the car looks great just when you think it might be perfect you change rims and it looks even better the stance is awesome and enjoyed seeing you drive her :thumbup: :thumbup: :thumbup: Quote Link to comment
q-tip Posted April 18, 2016 Report Share Posted April 18, 2016 Those rears 7.5 wide? Quote Link to comment
WAGON JON Posted April 21, 2016 Report Share Posted April 21, 2016 Yeah, they rub but not that bad! I just took the thing for a drive yesterday and now I'm inspired to work and drive my goon again! Thanks brosky for driving over to say hi! Gonna do some stuff to my car now! First, get it running again!! 1 Quote Link to comment
the510keeper Posted April 21, 2016 Author Report Share Posted April 21, 2016 Jon you can do it :) Quote Link to comment
shacks510 Posted April 22, 2016 Report Share Posted April 22, 2016 why do these tires look 5 years old? not good!! [/url] Quote Link to comment
the510keeper Posted April 22, 2016 Author Report Share Posted April 22, 2016 After rubbing for 300 miles they do. We don't use tire shine sprays at the shop. When u paint a car and it has fisheye. All silicone spray products get banned. Quote Link to comment
the510keeper Posted June 14, 2016 Author Report Share Posted June 14, 2016 Found some good hood shocks in chrome :) Next project 720/510 airdamn-valance A rough template Some cutting, a few trys actually, test fit Decided to delete this hole Old apron and the tabs were missing, needed to more some Welded and ready for grinding I did not grind out the center welds, just wanted them to look like rivets 7 Quote Link to comment
Dattokai Posted June 14, 2016 Report Share Posted June 14, 2016 Love the 720/510 valences, always wanted one. 2 Quote Link to comment
the510keeper Posted June 14, 2016 Author Report Share Posted June 14, 2016 Just before Canby I decided, to build the front airdamn / Apron combo, and while at it to pull the front end and readjust the drivers door. 9am Thursday morning Leaving 6am Friday morning for Canby Had to pull the fender to get to the hinge holes. wanted to open them up 1/8 inch to get a better adjustment on the door. One last thing, 626 wiper motor conversion Modded plate Modded wiring Modded linkage. Made a jig years ago. I have modded 20+ wiper motors over the years 5 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.