EricJB Posted April 10, 2015 Report Share Posted April 10, 2015 Gettin some at Pacific last weekend. 12.17@109.5 mph, 1.67 seconds to the 60ft mark. 3 Quote Link to comment
pitchlock Posted April 25, 2015 Report Share Posted April 25, 2015 Here's my 74 mixed in with about 6 different cars. Quote Link to comment
Phantom Posted April 26, 2015 Report Share Posted April 26, 2015 Had a chance last summer to spend a couple days doing a pretty thorough detail on the car. Looks better in the partial shade in Washington state than the bright sunlight of Texas. Quote Link to comment
FlannelFairlady Posted April 28, 2015 Report Share Posted April 28, 2015 New wheels! I need flares haha. 1 Quote Link to comment
cjack300zx Posted April 28, 2015 Report Share Posted April 28, 2015 ^ nice are those 17s or 18s? Quote Link to comment
FlannelFairlady Posted April 29, 2015 Report Share Posted April 29, 2015 They are Work VS Mesh 17x9's with flipped lips so it's a -50 offset. Quote Link to comment
strdz Posted May 12, 2015 Report Share Posted May 12, 2015 went for a cruise sat night ! Quote Link to comment
ClassicDatsun Posted May 12, 2015 Report Share Posted May 12, 2015 finally got a rear bumper Quote Link to comment
metalmonkey47 Posted May 29, 2015 Report Share Posted May 29, 2015 My $1000 Series 1 1 Quote Link to comment
tr8er Posted May 29, 2015 Report Share Posted May 29, 2015 ^ purrfection. I want that car. Quote Link to comment
FlannelFairlady Posted June 19, 2015 Report Share Posted June 19, 2015 My girls new look. 2 Quote Link to comment
Colbino Posted June 19, 2015 Report Share Posted June 19, 2015 My $1000 Series 1 Hell of a deal! Quote Link to comment
ol doc gully Posted July 13, 2015 Report Share Posted July 13, 2015 took the rat out for its first autox after spending 2 years in a garage with only a few fun runs. was mostly a shakedown before getting it on track before winter, but car did WONDERFULLY. suspension setup was on point, within a tweak of tire pressures and engine held out great ~ esp considering its an untouched longblock from 1978ish 2 Quote Link to comment
arck001 Posted September 3, 2015 Report Share Posted September 3, 2015 1974 Datsun 260z Same same. 1 Quote Link to comment
EndStar Posted September 11, 2015 Report Share Posted September 11, 2015 _DSC3593 by Evan Serilla, on Flickr_DSC3592 by Evan Serilla, on Flickr_DSC3611 by Evan Serilla, on Flickr now that i have A3As on it 1 Quote Link to comment
Mr.Dean_Yates Posted October 27, 2015 Report Share Posted October 27, 2015 Hello from Wales in the UK Here's a few of mine, I'm just finishing off the resto. What are the dimensions on those wheels? That's the exact figment I'm going for Quote Link to comment
Mr.Dean_Yates Posted October 27, 2015 Report Share Posted October 27, 2015 http://vimeo.com/78293126 Glad to see some one built a drift z great job. Quote Link to comment
Mr.Dean_Yates Posted October 27, 2015 Report Share Posted October 27, 2015 Man..... nobody invites me to anything :crying: They kicked me out of their club a while back so I feel ya. Some ass hole took my balance tube and sold it to someone else and expected me to buy a new one. So fuckem. Quote Link to comment
petercscherer Posted October 29, 2015 Report Share Posted October 29, 2015 Finally got an updated photo of my 1972 240Z. Just recently installed 16" Konig Rewinds, Chrome Bullet II Mirrors, and a Unique-Z Cold Air Intake! This is my daily driver, so it's rare to see it this clean. ;) Quote Link to comment
Mr.Dean_Yates Posted November 11, 2015 Report Share Posted November 11, 2015 Finally got an updated photo of my 1972 240Z. Just recently installed 16" Konig Rewinds, Chrome Bullet II Mirrors, and a Unique-Z Cold Air Intake! This is my daily driver, so it's rare to see it this clean. ;) I've got some plans drawn up for an aluminum cold air intake for the su carbs that I think is going to turn out pretty cool. I just gotta get the materials and I'll weld it together. I think people are gonna like it, it's not going to be as bulky as what you have here, and I'm thinking of making 2 different ones to test, a triangle shaped box, and a rectangular shaped box. I'll put em both to the test on a dyno when I get it configured Quote Link to comment
petercscherer Posted November 14, 2015 Report Share Posted November 14, 2015 I've got some plans drawn up for an aluminum cold air intake for the su carbs that I think is going to turn out pretty cool. I just gotta get the materials and I'll weld it together. I think people are gonna like it, it's not going to be as bulky as what you have here, and I'm thinking of making 2 different ones to test, a triangle shaped box, and a rectangular shaped box. I'll put em both to the test on a dyno when I get it configured My air-box is the shape it is because it uses the stock 240Z backing plate, which already has the best air-horns for flow and power. For a cold air-box, this is really the cleanest and best option on the market. And, for the price, it's a really easy install. ~Peter Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.