uberkevin Posted April 8, 2016 Author Report Share Posted April 8, 2016 I have no problem with the dust cover going into my transmission. 1 Quote Link to comment
datson4life Posted April 9, 2016 Report Share Posted April 9, 2016 I always have to remove them or the shaft wont slide in properly 3 Quote Link to comment
uberkevin Posted April 10, 2016 Author Report Share Posted April 10, 2016 240sx ka24e exhaust manifold. Cut 240sx down tube. More cutting needed. No more ebrake mount. Surprisingly This isn't touching. Like I thought it did. Driveline has bee done a few days but haven't had time to pick it up. Yesterday they closed at 12!! Wtf! Drove 40 minutes to find that one out... So maybe Wednesday. My day off. Need gaskets for the exhaust.. 1 Quote Link to comment
uberkevin Posted April 10, 2016 Author Report Share Posted April 10, 2016 Made a throttle cable out of a pathfinder cable, had to cut a bit out. Hoping this will hold tell I find something more better lol. 2 Quote Link to comment
datson4life Posted April 10, 2016 Report Share Posted April 10, 2016 Nice! I dream of not having torsion bars one day. So much more room 1 Quote Link to comment
uberkevin Posted April 10, 2016 Author Report Share Posted April 10, 2016 Thata be a nice day! Quote Link to comment
uberkevin Posted April 10, 2016 Author Report Share Posted April 10, 2016 Been working on the parcel tray, making things work so that I can still have it where it kinda needs to be and still have my kick panel that holds my fuseblock and ecu. Pictures if I finish things tonight. Quote Link to comment
thisismatt Posted April 10, 2016 Report Share Posted April 10, 2016 Skip the wood, just do metal or black ABS sheet! 2 Quote Link to comment
flatcat19 Posted April 10, 2016 Report Share Posted April 10, 2016 Does this mean your 520 parcel tray is up for grabs?!? Quote Link to comment
uberkevin Posted April 10, 2016 Author Report Share Posted April 10, 2016 Fuck no! Making it fit. Quote Link to comment
thisismatt Posted April 10, 2016 Report Share Posted April 10, 2016 That is a 520 parcel tray 1 Quote Link to comment
uberkevin Posted April 10, 2016 Author Report Share Posted April 10, 2016 I dont know what fucking revits to get! Lol Quote Link to comment
greenthumb Posted April 11, 2016 Report Share Posted April 11, 2016 Kevin, would you be kind enough to post some measurements on that parcel tray? I doubt I'll find that unicorn up here, but I'd like to have a go at making one 1 Quote Link to comment
uberkevin Posted April 11, 2016 Author Report Share Posted April 11, 2016 Hope these help. Let us know how yours turns out. Good luck. 2 Quote Link to comment
thisismatt Posted April 11, 2016 Report Share Posted April 11, 2016 Got the arm/bracket too? Quote Link to comment
uberkevin Posted April 11, 2016 Author Report Share Posted April 11, 2016 Unfortunately no. I'll snap a picture of what I happen to find. I must say I was pretty fucken happy when I found it. The tray.. holy fuck! When I found that I about shit my pants.. cost be 5 bucks along with a 35 or 55 dollar 520 dash. It was a nice day. I wanted to grab the whole thing but.. yeah. You know. Quote Link to comment
bananahamuck Posted April 11, 2016 Report Share Posted April 11, 2016 Hey why not just not worry about the crack and just use the exhaust manifold ,, and when you find a better one switch it out.. aint going to hurt shit ,, cuz i can't be any louder than the last exhaust you were running.. If anyone bitch's about exhaust leak fuck-um and feed-um fish 1 Quote Link to comment
uberkevin Posted April 11, 2016 Author Report Share Posted April 11, 2016 No crack on this bitch. 240sx ka24e exhaust manifold. Cut 240sx down tube. More cutting needed. No more ebrake mount. Surprisingly This isn't touching. Like I thought it did. Driveline has bee done a few days but haven't had time to pick it up. Yesterday they closed at 12!! Wtf! Drove 40 minutes to find that one out... So maybe Wednesday. My day off. Need gaskets for the exhaust.. Quote Link to comment
bananahamuck Posted April 11, 2016 Report Share Posted April 11, 2016 Yeah i saw those on the last page ,,,,, but if the engine leans over at all ,,, won't that be touching the frame?? 1 Quote Link to comment
greenthumb Posted April 11, 2016 Report Share Posted April 11, 2016 thanks for the detailed pics Kevin. We'll see how it goes. Is the stock shelf cardboard? Is that riveted to the frame then? Quote Link to comment
uberkevin Posted April 11, 2016 Author Report Share Posted April 11, 2016 Banana, I still need to cut a little more. Or are you talking about near the down tube flange? Riveted yes. Cardboard no, some type of cardboard pressed shiy idk lol. Quote Link to comment
bananahamuck Posted April 11, 2016 Report Share Posted April 11, 2016 Oh i didn't read you were cutting it more,,, either way this thing is so close ,, actually already done really... it hurts it's still sitting. Not card board,,, a type of masonite you can buy something very similar to it at most hardware stores and such 3 Quote Link to comment
Eagle_Adam Posted April 11, 2016 Report Share Posted April 11, 2016 Step by step! Lookn good so far :D 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.