Skib Posted August 14, 2012 Author Report Share Posted August 14, 2012 shhhhhh :P Quote Link to comment
RedBanner Posted August 14, 2012 Report Share Posted August 14, 2012 tho you gave us a huge hint. Quote Link to comment
datrod Posted August 14, 2012 Report Share Posted August 14, 2012 The fuck I been?? Didn't even know Skib had a 710. When I saw the vid I just figured that was for the 510 or a customer.. Nice work as always.. Quote Link to comment
2JZ260z Posted August 14, 2012 Report Share Posted August 14, 2012 So you can finally finish and drive it? Quote Link to comment
Tristin Posted August 15, 2012 Report Share Posted August 15, 2012 So you can finally finish and drive it? Yeah, it's Tuesday and you picked up all those parts on Subday. You should be done by now. Quote Link to comment
]2eDeYe Posted August 15, 2012 Report Share Posted August 15, 2012 Parts Pile!!!! Woohoo! :D Quote Link to comment
Skib Posted August 15, 2012 Author Report Share Posted August 15, 2012 The fuck I been?? Didn't even know Skib had a 710. When I saw the vid I just figured that was for the 510 or a customer.. Nice work as always.. lol ya gettin old buddy? :rofl: I saw you at Eagle Rock too but ya didnt see me haha So you can finally finish and drive it? well on its way Quote Link to comment
Z chopper Posted August 15, 2012 Report Share Posted August 15, 2012 Yeah, it's Tuesday and you picked up all those parts on Subday. You should be done by now. James is obviously not cracking the whip enough, the 510s and this 710 should be done by now. Or is Victory in charge of the whip?? Quote Link to comment
RedBanner Posted August 16, 2012 Report Share Posted August 16, 2012 going to have to ask mike what to use for windsheild trim clips... He said he would check with the body guy along time ago (pushes mike under bus) Quote Link to comment
datzenmike Posted August 16, 2012 Report Share Posted August 16, 2012 Shit I'm sure I didn't ask but I remember him saying that it was from a Camaro... yeah that helps. The 610/710/810 use the same windshield trim clip. 72825-U7400 for the fastener and 72826-U5100 for a spacer under the clip. Sorry but haven't talked to the guy in 6 months. Quote Link to comment
Skib Posted August 16, 2012 Author Report Share Posted August 16, 2012 lol I know absolutely nothing about glue in windows..... but I do know theres oic on their way.... Quote Link to comment
Skib Posted August 16, 2012 Author Report Share Posted August 16, 2012 (fenders arnt going on till the motors in but I couldnt help mocking it up :D) old white pannels go black :lol: alot better then they where and itl hold me over till I take them out and re upholster them. and a bit of dash fun...... so I found this kickass old volt gauge (the bars light up to show volts) and decided to put it in the clock hole. but I hate when shit doesnt look look like it belongs, so..... modded to bolt up to factory mounts and wire to factory plug like so even mounted a new speaker in the factory dash location..... because I haaaaaaate when people hack up door cards. Quote Link to comment
ArchetypeDatsun Posted August 16, 2012 Report Share Posted August 16, 2012 Love your new car Skib I'm Jelly! Quote Link to comment
RedBanner Posted August 16, 2012 Report Share Posted August 16, 2012 Thats exactly what i did with my clock lol, went with an oil pressure gauge. props on the speakerless door cards. Quote Link to comment
Skib Posted August 16, 2012 Author Report Share Posted August 16, 2012 yeah Im gonna use the stock radio hole for my other gauges. build a block off plate to fit in the original hole and mount my water temp, oil, ect Quote Link to comment
RedBanner Posted August 16, 2012 Report Share Posted August 16, 2012 yeah Im gonna use the stock radio hole for my other gauges. Boost, nawse, ext. Quote Link to comment
Will Posted August 16, 2012 Report Share Posted August 16, 2012 There was never any need to hack up door panels - The friendly folks at Datsun put holes for speakers behind those cardboardy kick panels - below the fusebox on the passengers side and below the hood release on the drivers side. So many door panels have died in vain. Quote Link to comment
]2eDeYe Posted August 16, 2012 Report Share Posted August 16, 2012 Looks fantastic, nice work on that volt meter. :cool: Quote Link to comment
Z chopper Posted August 16, 2012 Report Share Posted August 16, 2012 you gonna do this for tunes?? http://www.jalopyjournal.com/?p=11082 Quote Link to comment
datzenmike Posted August 16, 2012 Report Share Posted August 16, 2012 My sedan clock never worked. On the trip to Canby in '10 it started north of Portland... still going. Alas, the goon on does not and it's been there twice. Oil pressure gauge would be fabulous there! May I use that idea??? An AFR gauge would look good there too. Quote Link to comment
RedBanner Posted August 16, 2012 Report Share Posted August 16, 2012 id be insulted if you didnt. it makes me feal better seeing a number value for oil pressure. Quote Link to comment
Draker Posted August 16, 2012 Report Share Posted August 16, 2012 Damn... those mock ups look sooooo good already. Quote Link to comment
Eagle_Adam Posted August 16, 2012 Report Share Posted August 16, 2012 keep it up skib, cant wait to see this in person!!! Quote Link to comment
Skib Posted August 16, 2012 Author Report Share Posted August 16, 2012 you gonna do this for tunes?? http://www.jalopyjournal.com/?p=11082 thats pretty rad. Iv got a stock center console thats already been cut for a modern stereo so Im just sticking it there. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.