walpal Posted March 10, 2012 Report Share Posted March 10, 2012 This is brake related so hope I am listing in the correct area. I picked up a set of 280ZX struts at the ol' Pick n' Pull to swap on to the 510. Being a noob I wasn't to familiar with what they are supposed to look like, I just grabbed everything I thought I would need. Got them home and started the discovery process and noticed one looked very different. Turns out somebody put one of the pads in backwards which resulted in metal to metal contact on one side of the rotor. The best part is they drove it like that long enough to wear the disc down to this. Must of made some sparks when they really slammed on the brakes. I guess this shows which metal is harder. Quote Link to comment
Pumpkn210 Posted March 10, 2012 Report Share Posted March 10, 2012 Dude, that would look sweet on the shop wall! If you don't want it I do! Quote Link to comment
Jayden71 Posted March 10, 2012 Report Share Posted March 10, 2012 Ouchtown bro :o Quote Link to comment
bananahamuck Posted March 10, 2012 Report Share Posted March 10, 2012 As strange as this sounds i used to see that quite a bit ,,i would say at least 3 times and i didn`t work in the auto repair field that long. Quote Link to comment
thisismatt Posted March 10, 2012 Report Share Posted March 10, 2012 Just pad slap those brakes and you have some pretty nice "slotted" rotors... Quote Link to comment
Dat Lurka Posted March 10, 2012 Report Share Posted March 10, 2012 'THAT BITCH IS STILL INTACT TOO! ahaha love it! Mount it on oak. 2 Quote Link to comment
strang3majik Posted March 10, 2012 Report Share Posted March 10, 2012 Yea...some guy came into my work (autozone) and said he needed a new rotor and set his on the counter......followed by the hub in his other hand. I've seen some pretty crazy shite myself...haha. I have a problem with causing rotors to crack...my truck, my jeep...hopefully the datsun won't...haha. I tend to be hard on brakes though <_< Quote Link to comment
fastdadd Posted March 10, 2012 Report Share Posted March 10, 2012 i vote make a wall clock out of it Quote Link to comment
Dat Lurka Posted March 10, 2012 Report Share Posted March 10, 2012 i vote make a wall clock out of it x2 Quote Link to comment
mklotz70 Posted March 10, 2012 Report Share Posted March 10, 2012 The couple of times I've come across rotors like that, the owner swears that it didn't make any noise and didn't pull. They said it made noise for awhile, then it quit so they forgot about it. Quote Link to comment
q-tip Posted March 14, 2012 Report Share Posted March 14, 2012 The couple of times I've come across rotors like that, the owner swears that it didn't make any noise and didn't pull. They said it made noise for awhile, then it quit so they forgot about it. That is exactly what i have heard everytime I've seem rotors like that. "It wasnt makin any noise or nuthin." Ive seen about half a dozen like that, had one guy ask if it could be turned down <_< Quote Link to comment
datzenmike Posted March 14, 2012 Report Share Posted March 14, 2012 We had a flat tire on our Ford work van and when the tire was off I noticed the rotor all chewed up so we took it in for service and they replaced two new rotors and calipers. The service manager began by trying to tell me I should have.. blah blah blah sooner.... I told him there was absolutely NO indication anything was wrong. Brakes were the best thing. Only way I could have known was to take the wheel off. No pulling, noise or anything. Quote Link to comment
]2eDeYe Posted March 14, 2012 Report Share Posted March 14, 2012 And then on the flip side. Having a squeaky brake, that just won't stop, no matter what you do. But it still works fine. :lol: Quote Link to comment
hobbes_the_cat Posted March 22, 2012 Report Share Posted March 22, 2012 A local small tire shop in bremerton saves the worst ones the get and hang them on the wall of shame. They have one with the worn down pad welded to the disc. Locked up the wheel and the driver didn't know why. The guys at the shop said the customers are always suprised it's that bad. Quote Link to comment
Pumpkn210 Posted March 22, 2012 Report Share Posted March 22, 2012 I am currently looking for wasted parts to hang in my shop! Love the wall of shame! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.