Jump to content

mrbigtankers 521


mrbigtanker

Recommended Posts

  • Replies 7.2k
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

53754364534_1019e43e23_6k.jpgUntitled by raymond medeiros, on Flickr

 

Ok so here is the deal. I will be pushing the intercooler higher up of course. The apron is not installed and will have to be reshaped to clear the intercooler as well. Next thing is possibly pull the front bumper off as you can see it's been smoothed out. Most people don't notice the little details. Anyway might slot the front bumper not sure yet if needed or how for more air flow. Getting the piping to turbo is easy as we can go around front frame support and swayer, passenger side we probably going through he fender well as the alternator will not allow for space. Stay tuned, this is so holding me up. Once this is installed coolant water and gas and start this bitch up, and pray she holds together.

  • Like 4
Link to comment
22 hours ago, BrothersGarage said:

Probably get away with widening the ovals in the stock apron a good bit without too many people noticing much of a change. Could also add a 'Skid plate' with a scoop to capture air flowing under the truck a little too. 

Yes to both that's already in the plans. My Syclone has a stop as well on the intercooler in the same location. And yes thinking or probably going to join the ovals and make one big crack like a whale vagina and call it good. 

  • Like 1
  • Haha 1
Link to comment
  • 2 weeks later...

holy fuckballs where have i been 

what did you do with the green truck i loved that thing 🤣

that isn't even the same truck wads of cash there looks great 

  • Like 1
Link to comment

I haven't looked at Ray's thread here in a while, either.  That is one badass project, and I know how long that takes to get the stuff the way you want it.  I've got a project that I've owned close to three years now, and the few things it needed still aren't done yet.

 

I did grab a Mitsubishi sub, and I'm thinking I can make some room in the trunk for it..

 

image.jpeg.7e26491a5f562c292b6637c27daa47c6.jpeg

  • Like 1
  • Haha 1
Link to comment
2 hours ago, Duncan said:

I haven't looked at Ray's thread here in a while, either.  That is one badass project, and I know how long that takes to get the stuff the way you want it.  I've got a project that I've owned close to three years now, and the few things it needed still aren't done yet.

 

I did grab a Mitsubishi sub, and I'm thinking I can make some room in the trunk for it..

 

image.jpeg.7e26491a5f562c292b6637c27daa47c6.jpeg

How you doing young man. That's a big speaker or are just happy to see me.

  • Like 1
Link to comment
2 hours ago, mrbigtanker said:

How you doing young man. That's a big speaker or are just happy to see me.

 

Both...

 

Every time I see that photo, it makes me laugh.  I'm assuming the Japanese developed that thing sonetime around the 40's.  It looks like it would put out an insane amount of bass at damaging levels..

 

 

Edited by Duncan
  • Haha 2
Link to comment
16 hours ago, Duncan said:

I haven't looked at Ray's thread here in a while, either.  That is one badass project, and I know how long that takes to get the stuff the way you want it.  I've got a project that I've owned close to three years now, and the few things it needed still aren't done yet.

 

I did grab a Mitsubishi sub, and I'm thinking I can make some room in the trunk for it..

 

image.jpeg.7e26491a5f562c292b6637c27daa47c6.jpeg

McFly...

 

image.png.4034eb975259c3e2ead9f25fbc2ef87b.png

  • Like 2
  • Haha 2
Link to comment
On 6/16/2024 at 10:44 PM, Duncan said:

 

Both...

 

Every time I see that photo, it makes me laugh.  I'm assuming the Japanese developed that thing sonetime around the 40's.  It looks like it would put out an insane amount of bass at damaging levels..

 

 

The image is a fake.

 

Google it.

  • Like 1
  • Haha 1
Link to comment
  • 1 month later...

53925674122_e9ce74c27a_k.jpgUntitled by raymond medeiros, on Flickr

 

53925674162_601fb34ebf_k.jpgUntitled by raymond medeiros, on Flickr

 

53926814788_18cb597f96_k.jpgUntitled by raymond medeiros, on Flickr

 

53926816918_8a422532c7_k.jpgUntitled by raymond medeiros, on Flickr

 

Last piece of the interior to be completed. Wanted a subwoofer but since the cab is so small, I went with a 8" FOCAL that will go up against firewall on center hump along with the Alpine controller. I like this a lot and we made it as small as we could not take up so much space. 

  • Like 4
Link to comment

I love the look. Similar to a speaker from the 80s.

 

Hey Ray, you're a stereo guy. There's a shop in the LA area that modifies old head units to up the amps, make them bluetooth compatible and add inputs/outputs to the back. I've seen him on ebay before but now I can't find the guy. Have you ever run across this guy?

  • Like 1
Link to comment
4 hours ago, Stoffregen Motorsports said:

I love the look. Similar to a speaker from the 80s.

 

Hey Ray, you're a stereo guy. There's a shop in the LA area that modifies old head units to up the amps, make them bluetooth compatible and add inputs/outputs to the back. I've seen him on ebay before but now I can't find the guy. Have you ever run across this guy?

No sir but we can find him.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.